diff -Npur sqlite-version-3.32.2/src/expr.c sqlite-version-3.32.2-patched/src/expr.c --- sqlite-version-3.32.2/src/expr.c 2020-06-04 20:58:43.000000000 +0800 +++ sqlite-version-3.32.2-patched/src/expr.c 2020-07-08 10:00:47.367088648 +0800 @@ -3813,6 +3813,7 @@ expr_code_doover: AggInfo *pAggInfo = pExpr->pAggInfo; struct AggInfo_col *pCol; assert( pAggInfo!=0 ); + assert( AggInfoValid(pAggInfo) ); assert( pExpr->iAgg>=0 && pExpr->iAggnColumn ); pCol = &pAggInfo->aCol[pExpr->iAgg]; if( !pAggInfo->directMode ){ @@ -4121,6 +4122,7 @@ expr_code_doover: assert( !ExprHasProperty(pExpr, EP_IntValue) ); sqlite3ErrorMsg(pParse, "misuse of aggregate: %s()", pExpr->u.zToken); }else{ + assert( AggInfoValid(pInfo) ); return pInfo->aFunc[pExpr->iAgg].iMem; } break; @@ -5658,13 +5660,7 @@ struct SrcCount { ** Count the number of references to columns. */ static int exprSrcCount(Walker *pWalker, Expr *pExpr){ - /* There was once a NEVER() on the second term on the grounds that - ** sqlite3FunctionUsesThisSrc() was always called before - ** sqlite3ExprAnalyzeAggregates() and so the TK_COLUMNs have not yet - ** been converted into TK_AGG_COLUMN. But this is no longer true due - ** to window functions - sqlite3WindowRewrite() may now indirectly call - ** FunctionUsesThisSrc() when creating a new sub-select. */ - if( pExpr->op==TK_COLUMN || pExpr->op==TK_AGG_COLUMN ){ + if( pExpr->op==TK_COLUMN || NEVER(pExpr->op==TK_AGG_COLUMN) ){ int i; struct SrcCount *p = pWalker->u.pSrcCount; SrcList *pSrc = p->pSrc; diff -Npur sqlite-version-3.32.2/src/global.c sqlite-version-3.32.2-patched/src/global.c --- sqlite-version-3.32.2/src/global.c 2020-06-04 20:58:43.000000000 +0800 +++ sqlite-version-3.32.2-patched/src/global.c 2020-07-08 10:00:47.367088648 +0800 @@ -300,6 +300,11 @@ sqlite3_uint64 sqlite3NProfileCnt = 0; int sqlite3PendingByte = 0x40000000; #endif +/* +** Flags for select tracing and the ".selecttrace" macro of the CLI +*/ +/**/ u32 sqlite3SelectTrace = 0; + #include "opcodes.h" /* ** Properties of opcodes. The OPFLG_INITIALIZER macro is diff -Npur sqlite-version-3.32.2/src/resolve.c sqlite-version-3.32.2-patched/src/resolve.c --- sqlite-version-3.32.2/src/resolve.c 2020-06-04 20:58:43.000000000 +0800 +++ sqlite-version-3.32.2-patched/src/resolve.c 2020-07-08 10:00:47.367088648 +0800 @@ -1715,6 +1715,14 @@ static int resolveSelectStep(Walker *pWa return WRC_Abort; } } + }else if( p->pWin && ALWAYS( (p->selFlags & SF_WinRewrite)==0 ) ){ + sqlite3WindowRewrite(pParse, p); +#if SELECTTRACE_ENABLED + if( (sqlite3SelectTrace & 0x108)!=0 ){ + SELECTTRACE(0x104,pParse,p, ("after window rewrite:\n")); + sqlite3TreeViewSelect(0, p, 0); + } +#endif } #endif diff -Npur sqlite-version-3.32.2/src/select.c sqlite-version-3.32.2-patched/src/select.c --- sqlite-version-3.32.2/src/select.c 2020-06-04 20:58:43.000000000 +0800 +++ sqlite-version-3.32.2-patched/src/select.c 2020-07-08 10:00:50.899152517 +0800 @@ -15,20 +15,6 @@ #include "sqliteInt.h" /* -** Trace output macros -*/ -#if SELECTTRACE_ENABLED -/***/ int sqlite3SelectTrace = 0; -# define SELECTTRACE(K,P,S,X) \ - if(sqlite3SelectTrace&(K)) \ - sqlite3DebugPrintf("%u/%d/%p: ",(S)->selId,(P)->addrExplain,(S)),\ - sqlite3DebugPrintf X -#else -# define SELECTTRACE(K,P,S,X) -#endif - - -/* ** An instance of the following object is used to record information about ** how to process the DISTINCT keyword, to simplify passing that information ** into the selectInnerLoop() routine. @@ -2717,9 +2703,7 @@ static int multiSelect( selectOpName(p->op))); rc = sqlite3Select(pParse, p, &uniondest); testcase( rc!=SQLITE_OK ); - /* Query flattening in sqlite3Select() might refill p->pOrderBy. - ** Be sure to delete p->pOrderBy, therefore, to avoid a memory leak. */ - sqlite3ExprListDelete(db, p->pOrderBy); + assert( p->pOrderBy==0 ); pDelete = p->pPrior; p->pPrior = pPrior; p->pOrderBy = 0; @@ -4105,7 +4089,7 @@ static int flattenSubquery( ** We look at every expression in the outer query and every place we see ** "a" we substitute "x*3" and every place we see "b" we substitute "y+10". */ - if( pSub->pOrderBy ){ + if( pSub->pOrderBy && (pParent->selFlags & SF_NoopOrderBy)==0 ){ /* At this point, any non-zero iOrderByCol values indicate that the ** ORDER BY column expression is identical to the iOrderByCol'th ** expression returned by SELECT statement pSub. Since these values @@ -4426,11 +4410,14 @@ static int pushDownWhereTerms( ){ Expr *pNew; int nChng = 0; + Select *pSel; if( pWhere==0 ) return 0; if( pSubq->selFlags & SF_Recursive ) return 0; /* restriction (2) */ #ifndef SQLITE_OMIT_WINDOWFUNC - if( pSubq->pWin ) return 0; /* restriction (6) */ + for(pSel=pSubq; pSel; pSel=pSel->pPrior){ + if( pSel->pWin ) return 0; /* restriction (6) */ + } #endif #ifdef SQLITE_DEBUG @@ -5766,6 +5753,9 @@ int sqlite3Select( } if( sqlite3AuthCheck(pParse, SQLITE_SELECT, 0, 0, 0) ) return 1; memset(&sAggInfo, 0, sizeof(sAggInfo)); +#ifdef SQLITE_DEBUG + sAggInfo.iAggMagic = SQLITE_AGGMAGIC_VALID; +#endif #if SELECTTRACE_ENABLED SELECTTRACE(1,pParse,p, ("begin processing:\n", pParse->addrExplain)); if( sqlite3SelectTrace & 0x100 ){ @@ -5787,6 +5777,7 @@ int sqlite3Select( sqlite3ExprListDelete(db, p->pOrderBy); p->pOrderBy = 0; p->selFlags &= ~SF_Distinct; + p->selFlags |= SF_NoopOrderBy; } sqlite3SelectPrep(pParse, p, 0); if( pParse->nErr || db->mallocFailed ){ @@ -5804,19 +5795,6 @@ int sqlite3Select( generateColumnNames(pParse, p); } -#ifndef SQLITE_OMIT_WINDOWFUNC - rc = sqlite3WindowRewrite(pParse, p); - if( rc ){ - assert( db->mallocFailed || pParse->nErr>0 ); - goto select_end; - } -#if SELECTTRACE_ENABLED - if( p->pWin && (sqlite3SelectTrace & 0x108)!=0 ){ - SELECTTRACE(0x104,pParse,p, ("after window rewrite:\n")); - sqlite3TreeViewSelect(0, p, 0); - } -#endif -#endif /* SQLITE_OMIT_WINDOWFUNC */ pTabList = p->pSrc; isAgg = (p->selFlags & SF_Aggregate)!=0; memset(&sSort, 0, sizeof(sSort)); @@ -6144,7 +6122,7 @@ int sqlite3Select( if( (p->selFlags & (SF_Distinct|SF_Aggregate))==SF_Distinct && sqlite3ExprListCompare(sSort.pOrderBy, pEList, -1)==0 #ifndef SQLITE_OMIT_WINDOWFUNC - && p->pWin==0 + && ALWAYS(p->pWin==0) #endif ){ p->selFlags &= ~SF_Distinct; @@ -6791,6 +6769,14 @@ int sqlite3Select( select_end: sqlite3ExprListDelete(db, pMinMaxOrderBy); sqlite3DbFree(db, sAggInfo.aCol); +#ifdef SQLITE_DEBUG + for(i=0; ipAggInfo==&sAggInfo ); + sAggInfo.aFunc[i].pExpr->pAggInfo = 0; + } + sAggInfo.iAggMagic = 0; +#endif sqlite3DbFree(db, sAggInfo.aFunc); #if SELECTTRACE_ENABLED SELECTTRACE(0x1,pParse,p,("end processing\n")); diff -Npur sqlite-version-3.32.2/src/select.c.orig sqlite-version-3.32.2-patched/src/select.c.orig --- sqlite-version-3.32.2/src/select.c.orig 1970-01-01 08:00:00.000000000 +0800 +++ sqlite-version-3.32.2-patched/src/select.c.orig 2020-07-08 10:00:47.367088648 +0800 @@ -0,0 +1,6790 @@ +/* +** 2001 September 15 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +************************************************************************* +** This file contains C code routines that are called by the parser +** to handle SELECT statements in SQLite. +*/ +#include "sqliteInt.h" + +/* +** An instance of the following object is used to record information about +** how to process the DISTINCT keyword, to simplify passing that information +** into the selectInnerLoop() routine. +*/ +typedef struct DistinctCtx DistinctCtx; +struct DistinctCtx { + u8 isTnct; /* True if the DISTINCT keyword is present */ + u8 eTnctType; /* One of the WHERE_DISTINCT_* operators */ + int tabTnct; /* Ephemeral table used for DISTINCT processing */ + int addrTnct; /* Address of OP_OpenEphemeral opcode for tabTnct */ +}; + +/* +** An instance of the following object is used to record information about +** the ORDER BY (or GROUP BY) clause of query is being coded. +** +** The aDefer[] array is used by the sorter-references optimization. For +** example, assuming there is no index that can be used for the ORDER BY, +** for the query: +** +** SELECT a, bigblob FROM t1 ORDER BY a LIMIT 10; +** +** it may be more efficient to add just the "a" values to the sorter, and +** retrieve the associated "bigblob" values directly from table t1 as the +** 10 smallest "a" values are extracted from the sorter. +** +** When the sorter-reference optimization is used, there is one entry in the +** aDefer[] array for each database table that may be read as values are +** extracted from the sorter. +*/ +typedef struct SortCtx SortCtx; +struct SortCtx { + ExprList *pOrderBy; /* The ORDER BY (or GROUP BY clause) */ + int nOBSat; /* Number of ORDER BY terms satisfied by indices */ + int iECursor; /* Cursor number for the sorter */ + int regReturn; /* Register holding block-output return address */ + int labelBkOut; /* Start label for the block-output subroutine */ + int addrSortIndex; /* Address of the OP_SorterOpen or OP_OpenEphemeral */ + int labelDone; /* Jump here when done, ex: LIMIT reached */ + int labelOBLopt; /* Jump here when sorter is full */ + u8 sortFlags; /* Zero or more SORTFLAG_* bits */ +#ifdef SQLITE_ENABLE_SORTER_REFERENCES + u8 nDefer; /* Number of valid entries in aDefer[] */ + struct DeferredCsr { + Table *pTab; /* Table definition */ + int iCsr; /* Cursor number for table */ + int nKey; /* Number of PK columns for table pTab (>=1) */ + } aDefer[4]; +#endif + struct RowLoadInfo *pDeferredRowLoad; /* Deferred row loading info or NULL */ +}; +#define SORTFLAG_UseSorter 0x01 /* Use SorterOpen instead of OpenEphemeral */ + +/* +** Delete all the content of a Select structure. Deallocate the structure +** itself depending on the value of bFree +** +** If bFree==1, call sqlite3DbFree() on the p object. +** If bFree==0, Leave the first Select object unfreed +*/ +static void clearSelect(sqlite3 *db, Select *p, int bFree){ + while( p ){ + Select *pPrior = p->pPrior; + sqlite3ExprListDelete(db, p->pEList); + sqlite3SrcListDelete(db, p->pSrc); + sqlite3ExprDelete(db, p->pWhere); + sqlite3ExprListDelete(db, p->pGroupBy); + sqlite3ExprDelete(db, p->pHaving); + sqlite3ExprListDelete(db, p->pOrderBy); + sqlite3ExprDelete(db, p->pLimit); +#ifndef SQLITE_OMIT_WINDOWFUNC + if( OK_IF_ALWAYS_TRUE(p->pWinDefn) ){ + sqlite3WindowListDelete(db, p->pWinDefn); + } +#endif + if( OK_IF_ALWAYS_TRUE(p->pWith) ) sqlite3WithDelete(db, p->pWith); + if( bFree ) sqlite3DbFreeNN(db, p); + p = pPrior; + bFree = 1; + } +} + +/* +** Initialize a SelectDest structure. +*/ +void sqlite3SelectDestInit(SelectDest *pDest, int eDest, int iParm){ + pDest->eDest = (u8)eDest; + pDest->iSDParm = iParm; + pDest->zAffSdst = 0; + pDest->iSdst = 0; + pDest->nSdst = 0; +} + + +/* +** Allocate a new Select structure and return a pointer to that +** structure. +*/ +Select *sqlite3SelectNew( + Parse *pParse, /* Parsing context */ + ExprList *pEList, /* which columns to include in the result */ + SrcList *pSrc, /* the FROM clause -- which tables to scan */ + Expr *pWhere, /* the WHERE clause */ + ExprList *pGroupBy, /* the GROUP BY clause */ + Expr *pHaving, /* the HAVING clause */ + ExprList *pOrderBy, /* the ORDER BY clause */ + u32 selFlags, /* Flag parameters, such as SF_Distinct */ + Expr *pLimit /* LIMIT value. NULL means not used */ +){ + Select *pNew; + Select standin; + pNew = sqlite3DbMallocRawNN(pParse->db, sizeof(*pNew) ); + if( pNew==0 ){ + assert( pParse->db->mallocFailed ); + pNew = &standin; + } + if( pEList==0 ){ + pEList = sqlite3ExprListAppend(pParse, 0, + sqlite3Expr(pParse->db,TK_ASTERISK,0)); + } + pNew->pEList = pEList; + pNew->op = TK_SELECT; + pNew->selFlags = selFlags; + pNew->iLimit = 0; + pNew->iOffset = 0; + pNew->selId = ++pParse->nSelect; + pNew->addrOpenEphm[0] = -1; + pNew->addrOpenEphm[1] = -1; + pNew->nSelectRow = 0; + if( pSrc==0 ) pSrc = sqlite3DbMallocZero(pParse->db, sizeof(*pSrc)); + pNew->pSrc = pSrc; + pNew->pWhere = pWhere; + pNew->pGroupBy = pGroupBy; + pNew->pHaving = pHaving; + pNew->pOrderBy = pOrderBy; + pNew->pPrior = 0; + pNew->pNext = 0; + pNew->pLimit = pLimit; + pNew->pWith = 0; +#ifndef SQLITE_OMIT_WINDOWFUNC + pNew->pWin = 0; + pNew->pWinDefn = 0; +#endif + if( pParse->db->mallocFailed ) { + clearSelect(pParse->db, pNew, pNew!=&standin); + pNew = 0; + }else{ + assert( pNew->pSrc!=0 || pParse->nErr>0 ); + } + assert( pNew!=&standin ); + return pNew; +} + + +/* +** Delete the given Select structure and all of its substructures. +*/ +void sqlite3SelectDelete(sqlite3 *db, Select *p){ + if( OK_IF_ALWAYS_TRUE(p) ) clearSelect(db, p, 1); +} + +/* +** Delete all the substructure for p, but keep p allocated. Redefine +** p to be a single SELECT where every column of the result set has a +** value of NULL. +*/ +void sqlite3SelectReset(Parse *pParse, Select *p){ + if( ALWAYS(p) ){ + clearSelect(pParse->db, p, 0); + memset(&p->iLimit, 0, sizeof(Select) - offsetof(Select,iLimit)); + p->pEList = sqlite3ExprListAppend(pParse, 0, + sqlite3ExprAlloc(pParse->db,TK_NULL,0,0)); + p->pSrc = sqlite3DbMallocZero(pParse->db, sizeof(SrcList)); + } +} + +/* +** Return a pointer to the right-most SELECT statement in a compound. +*/ +static Select *findRightmost(Select *p){ + while( p->pNext ) p = p->pNext; + return p; +} + +/* +** Given 1 to 3 identifiers preceding the JOIN keyword, determine the +** type of join. Return an integer constant that expresses that type +** in terms of the following bit values: +** +** JT_INNER +** JT_CROSS +** JT_OUTER +** JT_NATURAL +** JT_LEFT +** JT_RIGHT +** +** A full outer join is the combination of JT_LEFT and JT_RIGHT. +** +** If an illegal or unsupported join type is seen, then still return +** a join type, but put an error in the pParse structure. +*/ +int sqlite3JoinType(Parse *pParse, Token *pA, Token *pB, Token *pC){ + int jointype = 0; + Token *apAll[3]; + Token *p; + /* 0123456789 123456789 123456789 123 */ + static const char zKeyText[] = "naturaleftouterightfullinnercross"; + static const struct { + u8 i; /* Beginning of keyword text in zKeyText[] */ + u8 nChar; /* Length of the keyword in characters */ + u8 code; /* Join type mask */ + } aKeyword[] = { + /* natural */ { 0, 7, JT_NATURAL }, + /* left */ { 6, 4, JT_LEFT|JT_OUTER }, + /* outer */ { 10, 5, JT_OUTER }, + /* right */ { 14, 5, JT_RIGHT|JT_OUTER }, + /* full */ { 19, 4, JT_LEFT|JT_RIGHT|JT_OUTER }, + /* inner */ { 23, 5, JT_INNER }, + /* cross */ { 28, 5, JT_INNER|JT_CROSS }, + }; + int i, j; + apAll[0] = pA; + apAll[1] = pB; + apAll[2] = pC; + for(i=0; i<3 && apAll[i]; i++){ + p = apAll[i]; + for(j=0; jn==aKeyword[j].nChar + && sqlite3StrNICmp((char*)p->z, &zKeyText[aKeyword[j].i], p->n)==0 ){ + jointype |= aKeyword[j].code; + break; + } + } + testcase( j==0 || j==1 || j==2 || j==3 || j==4 || j==5 || j==6 ); + if( j>=ArraySize(aKeyword) ){ + jointype |= JT_ERROR; + break; + } + } + if( + (jointype & (JT_INNER|JT_OUTER))==(JT_INNER|JT_OUTER) || + (jointype & JT_ERROR)!=0 + ){ + const char *zSp = " "; + assert( pB!=0 ); + if( pC==0 ){ zSp++; } + sqlite3ErrorMsg(pParse, "unknown or unsupported join type: " + "%T %T%s%T", pA, pB, zSp, pC); + jointype = JT_INNER; + }else if( (jointype & JT_OUTER)!=0 + && (jointype & (JT_LEFT|JT_RIGHT))!=JT_LEFT ){ + sqlite3ErrorMsg(pParse, + "RIGHT and FULL OUTER JOINs are not currently supported"); + jointype = JT_INNER; + } + return jointype; +} + +/* +** Return the index of a column in a table. Return -1 if the column +** is not contained in the table. +*/ +static int columnIndex(Table *pTab, const char *zCol){ + int i; + for(i=0; inCol; i++){ + if( sqlite3StrICmp(pTab->aCol[i].zName, zCol)==0 ) return i; + } + return -1; +} + +/* +** Search the first N tables in pSrc, from left to right, looking for a +** table that has a column named zCol. +** +** When found, set *piTab and *piCol to the table index and column index +** of the matching column and return TRUE. +** +** If not found, return FALSE. +*/ +static int tableAndColumnIndex( + SrcList *pSrc, /* Array of tables to search */ + int N, /* Number of tables in pSrc->a[] to search */ + const char *zCol, /* Name of the column we are looking for */ + int *piTab, /* Write index of pSrc->a[] here */ + int *piCol, /* Write index of pSrc->a[*piTab].pTab->aCol[] here */ + int bIgnoreHidden /* True to ignore hidden columns */ +){ + int i; /* For looping over tables in pSrc */ + int iCol; /* Index of column matching zCol */ + + assert( (piTab==0)==(piCol==0) ); /* Both or neither are NULL */ + for(i=0; ia[i].pTab, zCol); + if( iCol>=0 + && (bIgnoreHidden==0 || IsHiddenColumn(&pSrc->a[i].pTab->aCol[iCol])==0) + ){ + if( piTab ){ + *piTab = i; + *piCol = iCol; + } + return 1; + } + } + return 0; +} + +/* +** This function is used to add terms implied by JOIN syntax to the +** WHERE clause expression of a SELECT statement. The new term, which +** is ANDed with the existing WHERE clause, is of the form: +** +** (tab1.col1 = tab2.col2) +** +** where tab1 is the iSrc'th table in SrcList pSrc and tab2 is the +** (iSrc+1)'th. Column col1 is column iColLeft of tab1, and col2 is +** column iColRight of tab2. +*/ +static void addWhereTerm( + Parse *pParse, /* Parsing context */ + SrcList *pSrc, /* List of tables in FROM clause */ + int iLeft, /* Index of first table to join in pSrc */ + int iColLeft, /* Index of column in first table */ + int iRight, /* Index of second table in pSrc */ + int iColRight, /* Index of column in second table */ + int isOuterJoin, /* True if this is an OUTER join */ + Expr **ppWhere /* IN/OUT: The WHERE clause to add to */ +){ + sqlite3 *db = pParse->db; + Expr *pE1; + Expr *pE2; + Expr *pEq; + + assert( iLeftnSrc>iRight ); + assert( pSrc->a[iLeft].pTab ); + assert( pSrc->a[iRight].pTab ); + + pE1 = sqlite3CreateColumnExpr(db, pSrc, iLeft, iColLeft); + pE2 = sqlite3CreateColumnExpr(db, pSrc, iRight, iColRight); + + pEq = sqlite3PExpr(pParse, TK_EQ, pE1, pE2); + if( pEq && isOuterJoin ){ + ExprSetProperty(pEq, EP_FromJoin); + assert( !ExprHasProperty(pEq, EP_TokenOnly|EP_Reduced) ); + ExprSetVVAProperty(pEq, EP_NoReduce); + pEq->iRightJoinTable = (i16)pE2->iTable; + } + *ppWhere = sqlite3ExprAnd(pParse, *ppWhere, pEq); +} + +/* +** Set the EP_FromJoin property on all terms of the given expression. +** And set the Expr.iRightJoinTable to iTable for every term in the +** expression. +** +** The EP_FromJoin property is used on terms of an expression to tell +** the LEFT OUTER JOIN processing logic that this term is part of the +** join restriction specified in the ON or USING clause and not a part +** of the more general WHERE clause. These terms are moved over to the +** WHERE clause during join processing but we need to remember that they +** originated in the ON or USING clause. +** +** The Expr.iRightJoinTable tells the WHERE clause processing that the +** expression depends on table iRightJoinTable even if that table is not +** explicitly mentioned in the expression. That information is needed +** for cases like this: +** +** SELECT * FROM t1 LEFT JOIN t2 ON t1.a=t2.b AND t1.x=5 +** +** The where clause needs to defer the handling of the t1.x=5 +** term until after the t2 loop of the join. In that way, a +** NULL t2 row will be inserted whenever t1.x!=5. If we do not +** defer the handling of t1.x=5, it will be processed immediately +** after the t1 loop and rows with t1.x!=5 will never appear in +** the output, which is incorrect. +*/ +void sqlite3SetJoinExpr(Expr *p, int iTable){ + while( p ){ + ExprSetProperty(p, EP_FromJoin); + assert( !ExprHasProperty(p, EP_TokenOnly|EP_Reduced) ); + ExprSetVVAProperty(p, EP_NoReduce); + p->iRightJoinTable = (i16)iTable; + if( p->op==TK_FUNCTION && p->x.pList ){ + int i; + for(i=0; ix.pList->nExpr; i++){ + sqlite3SetJoinExpr(p->x.pList->a[i].pExpr, iTable); + } + } + sqlite3SetJoinExpr(p->pLeft, iTable); + p = p->pRight; + } +} + +/* Undo the work of sqlite3SetJoinExpr(). In the expression p, convert every +** term that is marked with EP_FromJoin and iRightJoinTable==iTable into +** an ordinary term that omits the EP_FromJoin mark. +** +** This happens when a LEFT JOIN is simplified into an ordinary JOIN. +*/ +static void unsetJoinExpr(Expr *p, int iTable){ + while( p ){ + if( ExprHasProperty(p, EP_FromJoin) + && (iTable<0 || p->iRightJoinTable==iTable) ){ + ExprClearProperty(p, EP_FromJoin); + } + if( p->op==TK_FUNCTION && p->x.pList ){ + int i; + for(i=0; ix.pList->nExpr; i++){ + unsetJoinExpr(p->x.pList->a[i].pExpr, iTable); + } + } + unsetJoinExpr(p->pLeft, iTable); + p = p->pRight; + } +} + +/* +** This routine processes the join information for a SELECT statement. +** ON and USING clauses are converted into extra terms of the WHERE clause. +** NATURAL joins also create extra WHERE clause terms. +** +** The terms of a FROM clause are contained in the Select.pSrc structure. +** The left most table is the first entry in Select.pSrc. The right-most +** table is the last entry. The join operator is held in the entry to +** the left. Thus entry 0 contains the join operator for the join between +** entries 0 and 1. Any ON or USING clauses associated with the join are +** also attached to the left entry. +** +** This routine returns the number of errors encountered. +*/ +static int sqliteProcessJoin(Parse *pParse, Select *p){ + SrcList *pSrc; /* All tables in the FROM clause */ + int i, j; /* Loop counters */ + struct SrcList_item *pLeft; /* Left table being joined */ + struct SrcList_item *pRight; /* Right table being joined */ + + pSrc = p->pSrc; + pLeft = &pSrc->a[0]; + pRight = &pLeft[1]; + for(i=0; inSrc-1; i++, pRight++, pLeft++){ + Table *pRightTab = pRight->pTab; + int isOuter; + + if( NEVER(pLeft->pTab==0 || pRightTab==0) ) continue; + isOuter = (pRight->fg.jointype & JT_OUTER)!=0; + + /* When the NATURAL keyword is present, add WHERE clause terms for + ** every column that the two tables have in common. + */ + if( pRight->fg.jointype & JT_NATURAL ){ + if( pRight->pOn || pRight->pUsing ){ + sqlite3ErrorMsg(pParse, "a NATURAL join may not have " + "an ON or USING clause", 0); + return 1; + } + for(j=0; jnCol; j++){ + char *zName; /* Name of column in the right table */ + int iLeft; /* Matching left table */ + int iLeftCol; /* Matching column in the left table */ + + if( IsHiddenColumn(&pRightTab->aCol[j]) ) continue; + zName = pRightTab->aCol[j].zName; + if( tableAndColumnIndex(pSrc, i+1, zName, &iLeft, &iLeftCol, 1) ){ + addWhereTerm(pParse, pSrc, iLeft, iLeftCol, i+1, j, + isOuter, &p->pWhere); + } + } + } + + /* Disallow both ON and USING clauses in the same join + */ + if( pRight->pOn && pRight->pUsing ){ + sqlite3ErrorMsg(pParse, "cannot have both ON and USING " + "clauses in the same join"); + return 1; + } + + /* Add the ON clause to the end of the WHERE clause, connected by + ** an AND operator. + */ + if( pRight->pOn ){ + if( isOuter ) sqlite3SetJoinExpr(pRight->pOn, pRight->iCursor); + p->pWhere = sqlite3ExprAnd(pParse, p->pWhere, pRight->pOn); + pRight->pOn = 0; + } + + /* Create extra terms on the WHERE clause for each column named + ** in the USING clause. Example: If the two tables to be joined are + ** A and B and the USING clause names X, Y, and Z, then add this + ** to the WHERE clause: A.X=B.X AND A.Y=B.Y AND A.Z=B.Z + ** Report an error if any column mentioned in the USING clause is + ** not contained in both tables to be joined. + */ + if( pRight->pUsing ){ + IdList *pList = pRight->pUsing; + for(j=0; jnId; j++){ + char *zName; /* Name of the term in the USING clause */ + int iLeft; /* Table on the left with matching column name */ + int iLeftCol; /* Column number of matching column on the left */ + int iRightCol; /* Column number of matching column on the right */ + + zName = pList->a[j].zName; + iRightCol = columnIndex(pRightTab, zName); + if( iRightCol<0 + || !tableAndColumnIndex(pSrc, i+1, zName, &iLeft, &iLeftCol, 0) + ){ + sqlite3ErrorMsg(pParse, "cannot join using column %s - column " + "not present in both tables", zName); + return 1; + } + addWhereTerm(pParse, pSrc, iLeft, iLeftCol, i+1, iRightCol, + isOuter, &p->pWhere); + } + } + } + return 0; +} + +/* +** An instance of this object holds information (beyond pParse and pSelect) +** needed to load the next result row that is to be added to the sorter. +*/ +typedef struct RowLoadInfo RowLoadInfo; +struct RowLoadInfo { + int regResult; /* Store results in array of registers here */ + u8 ecelFlags; /* Flag argument to ExprCodeExprList() */ +#ifdef SQLITE_ENABLE_SORTER_REFERENCES + ExprList *pExtra; /* Extra columns needed by sorter refs */ + int regExtraResult; /* Where to load the extra columns */ +#endif +}; + +/* +** This routine does the work of loading query data into an array of +** registers so that it can be added to the sorter. +*/ +static void innerLoopLoadRow( + Parse *pParse, /* Statement under construction */ + Select *pSelect, /* The query being coded */ + RowLoadInfo *pInfo /* Info needed to complete the row load */ +){ + sqlite3ExprCodeExprList(pParse, pSelect->pEList, pInfo->regResult, + 0, pInfo->ecelFlags); +#ifdef SQLITE_ENABLE_SORTER_REFERENCES + if( pInfo->pExtra ){ + sqlite3ExprCodeExprList(pParse, pInfo->pExtra, pInfo->regExtraResult, 0, 0); + sqlite3ExprListDelete(pParse->db, pInfo->pExtra); + } +#endif +} + +/* +** Code the OP_MakeRecord instruction that generates the entry to be +** added into the sorter. +** +** Return the register in which the result is stored. +*/ +static int makeSorterRecord( + Parse *pParse, + SortCtx *pSort, + Select *pSelect, + int regBase, + int nBase +){ + int nOBSat = pSort->nOBSat; + Vdbe *v = pParse->pVdbe; + int regOut = ++pParse->nMem; + if( pSort->pDeferredRowLoad ){ + innerLoopLoadRow(pParse, pSelect, pSort->pDeferredRowLoad); + } + sqlite3VdbeAddOp3(v, OP_MakeRecord, regBase+nOBSat, nBase-nOBSat, regOut); + return regOut; +} + +/* +** Generate code that will push the record in registers regData +** through regData+nData-1 onto the sorter. +*/ +static void pushOntoSorter( + Parse *pParse, /* Parser context */ + SortCtx *pSort, /* Information about the ORDER BY clause */ + Select *pSelect, /* The whole SELECT statement */ + int regData, /* First register holding data to be sorted */ + int regOrigData, /* First register holding data before packing */ + int nData, /* Number of elements in the regData data array */ + int nPrefixReg /* No. of reg prior to regData available for use */ +){ + Vdbe *v = pParse->pVdbe; /* Stmt under construction */ + int bSeq = ((pSort->sortFlags & SORTFLAG_UseSorter)==0); + int nExpr = pSort->pOrderBy->nExpr; /* No. of ORDER BY terms */ + int nBase = nExpr + bSeq + nData; /* Fields in sorter record */ + int regBase; /* Regs for sorter record */ + int regRecord = 0; /* Assembled sorter record */ + int nOBSat = pSort->nOBSat; /* ORDER BY terms to skip */ + int op; /* Opcode to add sorter record to sorter */ + int iLimit; /* LIMIT counter */ + int iSkip = 0; /* End of the sorter insert loop */ + + assert( bSeq==0 || bSeq==1 ); + + /* Three cases: + ** (1) The data to be sorted has already been packed into a Record + ** by a prior OP_MakeRecord. In this case nData==1 and regData + ** will be completely unrelated to regOrigData. + ** (2) All output columns are included in the sort record. In that + ** case regData==regOrigData. + ** (3) Some output columns are omitted from the sort record due to + ** the SQLITE_ENABLE_SORTER_REFERENCE optimization, or due to the + ** SQLITE_ECEL_OMITREF optimization, or due to the + ** SortCtx.pDeferredRowLoad optimiation. In any of these cases + ** regOrigData is 0 to prevent this routine from trying to copy + ** values that might not yet exist. + */ + assert( nData==1 || regData==regOrigData || regOrigData==0 ); + + if( nPrefixReg ){ + assert( nPrefixReg==nExpr+bSeq ); + regBase = regData - nPrefixReg; + }else{ + regBase = pParse->nMem + 1; + pParse->nMem += nBase; + } + assert( pSelect->iOffset==0 || pSelect->iLimit!=0 ); + iLimit = pSelect->iOffset ? pSelect->iOffset+1 : pSelect->iLimit; + pSort->labelDone = sqlite3VdbeMakeLabel(pParse); + sqlite3ExprCodeExprList(pParse, pSort->pOrderBy, regBase, regOrigData, + SQLITE_ECEL_DUP | (regOrigData? SQLITE_ECEL_REF : 0)); + if( bSeq ){ + sqlite3VdbeAddOp2(v, OP_Sequence, pSort->iECursor, regBase+nExpr); + } + if( nPrefixReg==0 && nData>0 ){ + sqlite3ExprCodeMove(pParse, regData, regBase+nExpr+bSeq, nData); + } + if( nOBSat>0 ){ + int regPrevKey; /* The first nOBSat columns of the previous row */ + int addrFirst; /* Address of the OP_IfNot opcode */ + int addrJmp; /* Address of the OP_Jump opcode */ + VdbeOp *pOp; /* Opcode that opens the sorter */ + int nKey; /* Number of sorting key columns, including OP_Sequence */ + KeyInfo *pKI; /* Original KeyInfo on the sorter table */ + + regRecord = makeSorterRecord(pParse, pSort, pSelect, regBase, nBase); + regPrevKey = pParse->nMem+1; + pParse->nMem += pSort->nOBSat; + nKey = nExpr - pSort->nOBSat + bSeq; + if( bSeq ){ + addrFirst = sqlite3VdbeAddOp1(v, OP_IfNot, regBase+nExpr); + }else{ + addrFirst = sqlite3VdbeAddOp1(v, OP_SequenceTest, pSort->iECursor); + } + VdbeCoverage(v); + sqlite3VdbeAddOp3(v, OP_Compare, regPrevKey, regBase, pSort->nOBSat); + pOp = sqlite3VdbeGetOp(v, pSort->addrSortIndex); + if( pParse->db->mallocFailed ) return; + pOp->p2 = nKey + nData; + pKI = pOp->p4.pKeyInfo; + memset(pKI->aSortFlags, 0, pKI->nKeyField); /* Makes OP_Jump testable */ + sqlite3VdbeChangeP4(v, -1, (char*)pKI, P4_KEYINFO); + testcase( pKI->nAllField > pKI->nKeyField+2 ); + pOp->p4.pKeyInfo = sqlite3KeyInfoFromExprList(pParse,pSort->pOrderBy,nOBSat, + pKI->nAllField-pKI->nKeyField-1); + pOp = 0; /* Ensure pOp not used after sqltie3VdbeAddOp3() */ + addrJmp = sqlite3VdbeCurrentAddr(v); + sqlite3VdbeAddOp3(v, OP_Jump, addrJmp+1, 0, addrJmp+1); VdbeCoverage(v); + pSort->labelBkOut = sqlite3VdbeMakeLabel(pParse); + pSort->regReturn = ++pParse->nMem; + sqlite3VdbeAddOp2(v, OP_Gosub, pSort->regReturn, pSort->labelBkOut); + sqlite3VdbeAddOp1(v, OP_ResetSorter, pSort->iECursor); + if( iLimit ){ + sqlite3VdbeAddOp2(v, OP_IfNot, iLimit, pSort->labelDone); + VdbeCoverage(v); + } + sqlite3VdbeJumpHere(v, addrFirst); + sqlite3ExprCodeMove(pParse, regBase, regPrevKey, pSort->nOBSat); + sqlite3VdbeJumpHere(v, addrJmp); + } + if( iLimit ){ + /* At this point the values for the new sorter entry are stored + ** in an array of registers. They need to be composed into a record + ** and inserted into the sorter if either (a) there are currently + ** less than LIMIT+OFFSET items or (b) the new record is smaller than + ** the largest record currently in the sorter. If (b) is true and there + ** are already LIMIT+OFFSET items in the sorter, delete the largest + ** entry before inserting the new one. This way there are never more + ** than LIMIT+OFFSET items in the sorter. + ** + ** If the new record does not need to be inserted into the sorter, + ** jump to the next iteration of the loop. If the pSort->labelOBLopt + ** value is not zero, then it is a label of where to jump. Otherwise, + ** just bypass the row insert logic. See the header comment on the + ** sqlite3WhereOrderByLimitOptLabel() function for additional info. + */ + int iCsr = pSort->iECursor; + sqlite3VdbeAddOp2(v, OP_IfNotZero, iLimit, sqlite3VdbeCurrentAddr(v)+4); + VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_Last, iCsr, 0); + iSkip = sqlite3VdbeAddOp4Int(v, OP_IdxLE, + iCsr, 0, regBase+nOBSat, nExpr-nOBSat); + VdbeCoverage(v); + sqlite3VdbeAddOp1(v, OP_Delete, iCsr); + } + if( regRecord==0 ){ + regRecord = makeSorterRecord(pParse, pSort, pSelect, regBase, nBase); + } + if( pSort->sortFlags & SORTFLAG_UseSorter ){ + op = OP_SorterInsert; + }else{ + op = OP_IdxInsert; + } + sqlite3VdbeAddOp4Int(v, op, pSort->iECursor, regRecord, + regBase+nOBSat, nBase-nOBSat); + if( iSkip ){ + sqlite3VdbeChangeP2(v, iSkip, + pSort->labelOBLopt ? pSort->labelOBLopt : sqlite3VdbeCurrentAddr(v)); + } +} + +/* +** Add code to implement the OFFSET +*/ +static void codeOffset( + Vdbe *v, /* Generate code into this VM */ + int iOffset, /* Register holding the offset counter */ + int iContinue /* Jump here to skip the current record */ +){ + if( iOffset>0 ){ + sqlite3VdbeAddOp3(v, OP_IfPos, iOffset, iContinue, 1); VdbeCoverage(v); + VdbeComment((v, "OFFSET")); + } +} + +/* +** Add code that will check to make sure the N registers starting at iMem +** form a distinct entry. iTab is a sorting index that holds previously +** seen combinations of the N values. A new entry is made in iTab +** if the current N values are new. +** +** A jump to addrRepeat is made and the N+1 values are popped from the +** stack if the top N elements are not distinct. +*/ +static void codeDistinct( + Parse *pParse, /* Parsing and code generating context */ + int iTab, /* A sorting index used to test for distinctness */ + int addrRepeat, /* Jump to here if not distinct */ + int N, /* Number of elements */ + int iMem /* First element */ +){ + Vdbe *v; + int r1; + + v = pParse->pVdbe; + r1 = sqlite3GetTempReg(pParse); + sqlite3VdbeAddOp4Int(v, OP_Found, iTab, addrRepeat, iMem, N); VdbeCoverage(v); + sqlite3VdbeAddOp3(v, OP_MakeRecord, iMem, N, r1); + sqlite3VdbeAddOp4Int(v, OP_IdxInsert, iTab, r1, iMem, N); + sqlite3VdbeChangeP5(v, OPFLAG_USESEEKRESULT); + sqlite3ReleaseTempReg(pParse, r1); +} + +#ifdef SQLITE_ENABLE_SORTER_REFERENCES +/* +** This function is called as part of inner-loop generation for a SELECT +** statement with an ORDER BY that is not optimized by an index. It +** determines the expressions, if any, that the sorter-reference +** optimization should be used for. The sorter-reference optimization +** is used for SELECT queries like: +** +** SELECT a, bigblob FROM t1 ORDER BY a LIMIT 10 +** +** If the optimization is used for expression "bigblob", then instead of +** storing values read from that column in the sorter records, the PK of +** the row from table t1 is stored instead. Then, as records are extracted from +** the sorter to return to the user, the required value of bigblob is +** retrieved directly from table t1. If the values are very large, this +** can be more efficient than storing them directly in the sorter records. +** +** The ExprList_item.bSorterRef flag is set for each expression in pEList +** for which the sorter-reference optimization should be enabled. +** Additionally, the pSort->aDefer[] array is populated with entries +** for all cursors required to evaluate all selected expressions. Finally. +** output variable (*ppExtra) is set to an expression list containing +** expressions for all extra PK values that should be stored in the +** sorter records. +*/ +static void selectExprDefer( + Parse *pParse, /* Leave any error here */ + SortCtx *pSort, /* Sorter context */ + ExprList *pEList, /* Expressions destined for sorter */ + ExprList **ppExtra /* Expressions to append to sorter record */ +){ + int i; + int nDefer = 0; + ExprList *pExtra = 0; + for(i=0; inExpr; i++){ + struct ExprList_item *pItem = &pEList->a[i]; + if( pItem->u.x.iOrderByCol==0 ){ + Expr *pExpr = pItem->pExpr; + Table *pTab = pExpr->y.pTab; + if( pExpr->op==TK_COLUMN && pExpr->iColumn>=0 && pTab && !IsVirtual(pTab) + && (pTab->aCol[pExpr->iColumn].colFlags & COLFLAG_SORTERREF) + ){ + int j; + for(j=0; jaDefer[j].iCsr==pExpr->iTable ) break; + } + if( j==nDefer ){ + if( nDefer==ArraySize(pSort->aDefer) ){ + continue; + }else{ + int nKey = 1; + int k; + Index *pPk = 0; + if( !HasRowid(pTab) ){ + pPk = sqlite3PrimaryKeyIndex(pTab); + nKey = pPk->nKeyCol; + } + for(k=0; kiTable = pExpr->iTable; + pNew->y.pTab = pExpr->y.pTab; + pNew->iColumn = pPk ? pPk->aiColumn[k] : -1; + pExtra = sqlite3ExprListAppend(pParse, pExtra, pNew); + } + } + pSort->aDefer[nDefer].pTab = pExpr->y.pTab; + pSort->aDefer[nDefer].iCsr = pExpr->iTable; + pSort->aDefer[nDefer].nKey = nKey; + nDefer++; + } + } + pItem->bSorterRef = 1; + } + } + } + pSort->nDefer = (u8)nDefer; + *ppExtra = pExtra; +} +#endif + +/* +** This routine generates the code for the inside of the inner loop +** of a SELECT. +** +** If srcTab is negative, then the p->pEList expressions +** are evaluated in order to get the data for this row. If srcTab is +** zero or more, then data is pulled from srcTab and p->pEList is used only +** to get the number of columns and the collation sequence for each column. +*/ +static void selectInnerLoop( + Parse *pParse, /* The parser context */ + Select *p, /* The complete select statement being coded */ + int srcTab, /* Pull data from this table if non-negative */ + SortCtx *pSort, /* If not NULL, info on how to process ORDER BY */ + DistinctCtx *pDistinct, /* If not NULL, info on how to process DISTINCT */ + SelectDest *pDest, /* How to dispose of the results */ + int iContinue, /* Jump here to continue with next row */ + int iBreak /* Jump here to break out of the inner loop */ +){ + Vdbe *v = pParse->pVdbe; + int i; + int hasDistinct; /* True if the DISTINCT keyword is present */ + int eDest = pDest->eDest; /* How to dispose of results */ + int iParm = pDest->iSDParm; /* First argument to disposal method */ + int nResultCol; /* Number of result columns */ + int nPrefixReg = 0; /* Number of extra registers before regResult */ + RowLoadInfo sRowLoadInfo; /* Info for deferred row loading */ + + /* Usually, regResult is the first cell in an array of memory cells + ** containing the current result row. In this case regOrig is set to the + ** same value. However, if the results are being sent to the sorter, the + ** values for any expressions that are also part of the sort-key are omitted + ** from this array. In this case regOrig is set to zero. */ + int regResult; /* Start of memory holding current results */ + int regOrig; /* Start of memory holding full result (or 0) */ + + assert( v ); + assert( p->pEList!=0 ); + hasDistinct = pDistinct ? pDistinct->eTnctType : WHERE_DISTINCT_NOOP; + if( pSort && pSort->pOrderBy==0 ) pSort = 0; + if( pSort==0 && !hasDistinct ){ + assert( iContinue!=0 ); + codeOffset(v, p->iOffset, iContinue); + } + + /* Pull the requested columns. + */ + nResultCol = p->pEList->nExpr; + + if( pDest->iSdst==0 ){ + if( pSort ){ + nPrefixReg = pSort->pOrderBy->nExpr; + if( !(pSort->sortFlags & SORTFLAG_UseSorter) ) nPrefixReg++; + pParse->nMem += nPrefixReg; + } + pDest->iSdst = pParse->nMem+1; + pParse->nMem += nResultCol; + }else if( pDest->iSdst+nResultCol > pParse->nMem ){ + /* This is an error condition that can result, for example, when a SELECT + ** on the right-hand side of an INSERT contains more result columns than + ** there are columns in the table on the left. The error will be caught + ** and reported later. But we need to make sure enough memory is allocated + ** to avoid other spurious errors in the meantime. */ + pParse->nMem += nResultCol; + } + pDest->nSdst = nResultCol; + regOrig = regResult = pDest->iSdst; + if( srcTab>=0 ){ + for(i=0; ipEList->a[i].zEName)); + } + }else if( eDest!=SRT_Exists ){ +#ifdef SQLITE_ENABLE_SORTER_REFERENCES + ExprList *pExtra = 0; +#endif + /* If the destination is an EXISTS(...) expression, the actual + ** values returned by the SELECT are not required. + */ + u8 ecelFlags; /* "ecel" is an abbreviation of "ExprCodeExprList" */ + ExprList *pEList; + if( eDest==SRT_Mem || eDest==SRT_Output || eDest==SRT_Coroutine ){ + ecelFlags = SQLITE_ECEL_DUP; + }else{ + ecelFlags = 0; + } + if( pSort && hasDistinct==0 && eDest!=SRT_EphemTab && eDest!=SRT_Table ){ + /* For each expression in p->pEList that is a copy of an expression in + ** the ORDER BY clause (pSort->pOrderBy), set the associated + ** iOrderByCol value to one more than the index of the ORDER BY + ** expression within the sort-key that pushOntoSorter() will generate. + ** This allows the p->pEList field to be omitted from the sorted record, + ** saving space and CPU cycles. */ + ecelFlags |= (SQLITE_ECEL_OMITREF|SQLITE_ECEL_REF); + + for(i=pSort->nOBSat; ipOrderBy->nExpr; i++){ + int j; + if( (j = pSort->pOrderBy->a[i].u.x.iOrderByCol)>0 ){ + p->pEList->a[j-1].u.x.iOrderByCol = i+1-pSort->nOBSat; + } + } +#ifdef SQLITE_ENABLE_SORTER_REFERENCES + selectExprDefer(pParse, pSort, p->pEList, &pExtra); + if( pExtra && pParse->db->mallocFailed==0 ){ + /* If there are any extra PK columns to add to the sorter records, + ** allocate extra memory cells and adjust the OpenEphemeral + ** instruction to account for the larger records. This is only + ** required if there are one or more WITHOUT ROWID tables with + ** composite primary keys in the SortCtx.aDefer[] array. */ + VdbeOp *pOp = sqlite3VdbeGetOp(v, pSort->addrSortIndex); + pOp->p2 += (pExtra->nExpr - pSort->nDefer); + pOp->p4.pKeyInfo->nAllField += (pExtra->nExpr - pSort->nDefer); + pParse->nMem += pExtra->nExpr; + } +#endif + + /* Adjust nResultCol to account for columns that are omitted + ** from the sorter by the optimizations in this branch */ + pEList = p->pEList; + for(i=0; inExpr; i++){ + if( pEList->a[i].u.x.iOrderByCol>0 +#ifdef SQLITE_ENABLE_SORTER_REFERENCES + || pEList->a[i].bSorterRef +#endif + ){ + nResultCol--; + regOrig = 0; + } + } + + testcase( regOrig ); + testcase( eDest==SRT_Set ); + testcase( eDest==SRT_Mem ); + testcase( eDest==SRT_Coroutine ); + testcase( eDest==SRT_Output ); + assert( eDest==SRT_Set || eDest==SRT_Mem + || eDest==SRT_Coroutine || eDest==SRT_Output ); + } + sRowLoadInfo.regResult = regResult; + sRowLoadInfo.ecelFlags = ecelFlags; +#ifdef SQLITE_ENABLE_SORTER_REFERENCES + sRowLoadInfo.pExtra = pExtra; + sRowLoadInfo.regExtraResult = regResult + nResultCol; + if( pExtra ) nResultCol += pExtra->nExpr; +#endif + if( p->iLimit + && (ecelFlags & SQLITE_ECEL_OMITREF)!=0 + && nPrefixReg>0 + ){ + assert( pSort!=0 ); + assert( hasDistinct==0 ); + pSort->pDeferredRowLoad = &sRowLoadInfo; + regOrig = 0; + }else{ + innerLoopLoadRow(pParse, p, &sRowLoadInfo); + } + } + + /* If the DISTINCT keyword was present on the SELECT statement + ** and this row has been seen before, then do not make this row + ** part of the result. + */ + if( hasDistinct ){ + switch( pDistinct->eTnctType ){ + case WHERE_DISTINCT_ORDERED: { + VdbeOp *pOp; /* No longer required OpenEphemeral instr. */ + int iJump; /* Jump destination */ + int regPrev; /* Previous row content */ + + /* Allocate space for the previous row */ + regPrev = pParse->nMem+1; + pParse->nMem += nResultCol; + + /* Change the OP_OpenEphemeral coded earlier to an OP_Null + ** sets the MEM_Cleared bit on the first register of the + ** previous value. This will cause the OP_Ne below to always + ** fail on the first iteration of the loop even if the first + ** row is all NULLs. + */ + sqlite3VdbeChangeToNoop(v, pDistinct->addrTnct); + pOp = sqlite3VdbeGetOp(v, pDistinct->addrTnct); + pOp->opcode = OP_Null; + pOp->p1 = 1; + pOp->p2 = regPrev; + pOp = 0; /* Ensure pOp is not used after sqlite3VdbeAddOp() */ + + iJump = sqlite3VdbeCurrentAddr(v) + nResultCol; + for(i=0; ipEList->a[i].pExpr); + if( idb->mallocFailed ); + sqlite3VdbeAddOp3(v, OP_Copy, regResult, regPrev, nResultCol-1); + break; + } + + case WHERE_DISTINCT_UNIQUE: { + sqlite3VdbeChangeToNoop(v, pDistinct->addrTnct); + break; + } + + default: { + assert( pDistinct->eTnctType==WHERE_DISTINCT_UNORDERED ); + codeDistinct(pParse, pDistinct->tabTnct, iContinue, nResultCol, + regResult); + break; + } + } + if( pSort==0 ){ + codeOffset(v, p->iOffset, iContinue); + } + } + + switch( eDest ){ + /* In this mode, write each query result to the key of the temporary + ** table iParm. + */ +#ifndef SQLITE_OMIT_COMPOUND_SELECT + case SRT_Union: { + int r1; + r1 = sqlite3GetTempReg(pParse); + sqlite3VdbeAddOp3(v, OP_MakeRecord, regResult, nResultCol, r1); + sqlite3VdbeAddOp4Int(v, OP_IdxInsert, iParm, r1, regResult, nResultCol); + sqlite3ReleaseTempReg(pParse, r1); + break; + } + + /* Construct a record from the query result, but instead of + ** saving that record, use it as a key to delete elements from + ** the temporary table iParm. + */ + case SRT_Except: { + sqlite3VdbeAddOp3(v, OP_IdxDelete, iParm, regResult, nResultCol); + break; + } +#endif /* SQLITE_OMIT_COMPOUND_SELECT */ + + /* Store the result as data using a unique key. + */ + case SRT_Fifo: + case SRT_DistFifo: + case SRT_Table: + case SRT_EphemTab: { + int r1 = sqlite3GetTempRange(pParse, nPrefixReg+1); + testcase( eDest==SRT_Table ); + testcase( eDest==SRT_EphemTab ); + testcase( eDest==SRT_Fifo ); + testcase( eDest==SRT_DistFifo ); + sqlite3VdbeAddOp3(v, OP_MakeRecord, regResult, nResultCol, r1+nPrefixReg); +#ifndef SQLITE_OMIT_CTE + if( eDest==SRT_DistFifo ){ + /* If the destination is DistFifo, then cursor (iParm+1) is open + ** on an ephemeral index. If the current row is already present + ** in the index, do not write it to the output. If not, add the + ** current row to the index and proceed with writing it to the + ** output table as well. */ + int addr = sqlite3VdbeCurrentAddr(v) + 4; + sqlite3VdbeAddOp4Int(v, OP_Found, iParm+1, addr, r1, 0); + VdbeCoverage(v); + sqlite3VdbeAddOp4Int(v, OP_IdxInsert, iParm+1, r1,regResult,nResultCol); + assert( pSort==0 ); + } +#endif + if( pSort ){ + assert( regResult==regOrig ); + pushOntoSorter(pParse, pSort, p, r1+nPrefixReg, regOrig, 1, nPrefixReg); + }else{ + int r2 = sqlite3GetTempReg(pParse); + sqlite3VdbeAddOp2(v, OP_NewRowid, iParm, r2); + sqlite3VdbeAddOp3(v, OP_Insert, iParm, r1, r2); + sqlite3VdbeChangeP5(v, OPFLAG_APPEND); + sqlite3ReleaseTempReg(pParse, r2); + } + sqlite3ReleaseTempRange(pParse, r1, nPrefixReg+1); + break; + } + +#ifndef SQLITE_OMIT_SUBQUERY + /* If we are creating a set for an "expr IN (SELECT ...)" construct, + ** then there should be a single item on the stack. Write this + ** item into the set table with bogus data. + */ + case SRT_Set: { + if( pSort ){ + /* At first glance you would think we could optimize out the + ** ORDER BY in this case since the order of entries in the set + ** does not matter. But there might be a LIMIT clause, in which + ** case the order does matter */ + pushOntoSorter( + pParse, pSort, p, regResult, regOrig, nResultCol, nPrefixReg); + }else{ + int r1 = sqlite3GetTempReg(pParse); + assert( sqlite3Strlen30(pDest->zAffSdst)==nResultCol ); + sqlite3VdbeAddOp4(v, OP_MakeRecord, regResult, nResultCol, + r1, pDest->zAffSdst, nResultCol); + sqlite3VdbeAddOp4Int(v, OP_IdxInsert, iParm, r1, regResult, nResultCol); + sqlite3ReleaseTempReg(pParse, r1); + } + break; + } + + /* If any row exist in the result set, record that fact and abort. + */ + case SRT_Exists: { + sqlite3VdbeAddOp2(v, OP_Integer, 1, iParm); + /* The LIMIT clause will terminate the loop for us */ + break; + } + + /* If this is a scalar select that is part of an expression, then + ** store the results in the appropriate memory cell or array of + ** memory cells and break out of the scan loop. + */ + case SRT_Mem: { + if( pSort ){ + assert( nResultCol<=pDest->nSdst ); + pushOntoSorter( + pParse, pSort, p, regResult, regOrig, nResultCol, nPrefixReg); + }else{ + assert( nResultCol==pDest->nSdst ); + assert( regResult==iParm ); + /* The LIMIT clause will jump out of the loop for us */ + } + break; + } +#endif /* #ifndef SQLITE_OMIT_SUBQUERY */ + + case SRT_Coroutine: /* Send data to a co-routine */ + case SRT_Output: { /* Return the results */ + testcase( eDest==SRT_Coroutine ); + testcase( eDest==SRT_Output ); + if( pSort ){ + pushOntoSorter(pParse, pSort, p, regResult, regOrig, nResultCol, + nPrefixReg); + }else if( eDest==SRT_Coroutine ){ + sqlite3VdbeAddOp1(v, OP_Yield, pDest->iSDParm); + }else{ + sqlite3VdbeAddOp2(v, OP_ResultRow, regResult, nResultCol); + } + break; + } + +#ifndef SQLITE_OMIT_CTE + /* Write the results into a priority queue that is order according to + ** pDest->pOrderBy (in pSO). pDest->iSDParm (in iParm) is the cursor for an + ** index with pSO->nExpr+2 columns. Build a key using pSO for the first + ** pSO->nExpr columns, then make sure all keys are unique by adding a + ** final OP_Sequence column. The last column is the record as a blob. + */ + case SRT_DistQueue: + case SRT_Queue: { + int nKey; + int r1, r2, r3; + int addrTest = 0; + ExprList *pSO; + pSO = pDest->pOrderBy; + assert( pSO ); + nKey = pSO->nExpr; + r1 = sqlite3GetTempReg(pParse); + r2 = sqlite3GetTempRange(pParse, nKey+2); + r3 = r2+nKey+1; + if( eDest==SRT_DistQueue ){ + /* If the destination is DistQueue, then cursor (iParm+1) is open + ** on a second ephemeral index that holds all values every previously + ** added to the queue. */ + addrTest = sqlite3VdbeAddOp4Int(v, OP_Found, iParm+1, 0, + regResult, nResultCol); + VdbeCoverage(v); + } + sqlite3VdbeAddOp3(v, OP_MakeRecord, regResult, nResultCol, r3); + if( eDest==SRT_DistQueue ){ + sqlite3VdbeAddOp2(v, OP_IdxInsert, iParm+1, r3); + sqlite3VdbeChangeP5(v, OPFLAG_USESEEKRESULT); + } + for(i=0; ia[i].u.x.iOrderByCol - 1, + r2+i); + } + sqlite3VdbeAddOp2(v, OP_Sequence, iParm, r2+nKey); + sqlite3VdbeAddOp3(v, OP_MakeRecord, r2, nKey+2, r1); + sqlite3VdbeAddOp4Int(v, OP_IdxInsert, iParm, r1, r2, nKey+2); + if( addrTest ) sqlite3VdbeJumpHere(v, addrTest); + sqlite3ReleaseTempReg(pParse, r1); + sqlite3ReleaseTempRange(pParse, r2, nKey+2); + break; + } +#endif /* SQLITE_OMIT_CTE */ + + + +#if !defined(SQLITE_OMIT_TRIGGER) + /* Discard the results. This is used for SELECT statements inside + ** the body of a TRIGGER. The purpose of such selects is to call + ** user-defined functions that have side effects. We do not care + ** about the actual results of the select. + */ + default: { + assert( eDest==SRT_Discard ); + break; + } +#endif + } + + /* Jump to the end of the loop if the LIMIT is reached. Except, if + ** there is a sorter, in which case the sorter has already limited + ** the output for us. + */ + if( pSort==0 && p->iLimit ){ + sqlite3VdbeAddOp2(v, OP_DecrJumpZero, p->iLimit, iBreak); VdbeCoverage(v); + } +} + +/* +** Allocate a KeyInfo object sufficient for an index of N key columns and +** X extra columns. +*/ +KeyInfo *sqlite3KeyInfoAlloc(sqlite3 *db, int N, int X){ + int nExtra = (N+X)*(sizeof(CollSeq*)+1) - sizeof(CollSeq*); + KeyInfo *p = sqlite3DbMallocRawNN(db, sizeof(KeyInfo) + nExtra); + if( p ){ + p->aSortFlags = (u8*)&p->aColl[N+X]; + p->nKeyField = (u16)N; + p->nAllField = (u16)(N+X); + p->enc = ENC(db); + p->db = db; + p->nRef = 1; + memset(&p[1], 0, nExtra); + }else{ + sqlite3OomFault(db); + } + return p; +} + +/* +** Deallocate a KeyInfo object +*/ +void sqlite3KeyInfoUnref(KeyInfo *p){ + if( p ){ + assert( p->nRef>0 ); + p->nRef--; + if( p->nRef==0 ) sqlite3DbFreeNN(p->db, p); + } +} + +/* +** Make a new pointer to a KeyInfo object +*/ +KeyInfo *sqlite3KeyInfoRef(KeyInfo *p){ + if( p ){ + assert( p->nRef>0 ); + p->nRef++; + } + return p; +} + +#ifdef SQLITE_DEBUG +/* +** Return TRUE if a KeyInfo object can be change. The KeyInfo object +** can only be changed if this is just a single reference to the object. +** +** This routine is used only inside of assert() statements. +*/ +int sqlite3KeyInfoIsWriteable(KeyInfo *p){ return p->nRef==1; } +#endif /* SQLITE_DEBUG */ + +/* +** Given an expression list, generate a KeyInfo structure that records +** the collating sequence for each expression in that expression list. +** +** If the ExprList is an ORDER BY or GROUP BY clause then the resulting +** KeyInfo structure is appropriate for initializing a virtual index to +** implement that clause. If the ExprList is the result set of a SELECT +** then the KeyInfo structure is appropriate for initializing a virtual +** index to implement a DISTINCT test. +** +** Space to hold the KeyInfo structure is obtained from malloc. The calling +** function is responsible for seeing that this structure is eventually +** freed. +*/ +KeyInfo *sqlite3KeyInfoFromExprList( + Parse *pParse, /* Parsing context */ + ExprList *pList, /* Form the KeyInfo object from this ExprList */ + int iStart, /* Begin with this column of pList */ + int nExtra /* Add this many extra columns to the end */ +){ + int nExpr; + KeyInfo *pInfo; + struct ExprList_item *pItem; + sqlite3 *db = pParse->db; + int i; + + nExpr = pList->nExpr; + pInfo = sqlite3KeyInfoAlloc(db, nExpr-iStart, nExtra+1); + if( pInfo ){ + assert( sqlite3KeyInfoIsWriteable(pInfo) ); + for(i=iStart, pItem=pList->a+iStart; iaColl[i-iStart] = sqlite3ExprNNCollSeq(pParse, pItem->pExpr); + pInfo->aSortFlags[i-iStart] = pItem->sortFlags; + } + } + return pInfo; +} + +/* +** Name of the connection operator, used for error messages. +*/ +static const char *selectOpName(int id){ + char *z; + switch( id ){ + case TK_ALL: z = "UNION ALL"; break; + case TK_INTERSECT: z = "INTERSECT"; break; + case TK_EXCEPT: z = "EXCEPT"; break; + default: z = "UNION"; break; + } + return z; +} + +#ifndef SQLITE_OMIT_EXPLAIN +/* +** Unless an "EXPLAIN QUERY PLAN" command is being processed, this function +** is a no-op. Otherwise, it adds a single row of output to the EQP result, +** where the caption is of the form: +** +** "USE TEMP B-TREE FOR xxx" +** +** where xxx is one of "DISTINCT", "ORDER BY" or "GROUP BY". Exactly which +** is determined by the zUsage argument. +*/ +static void explainTempTable(Parse *pParse, const char *zUsage){ + ExplainQueryPlan((pParse, 0, "USE TEMP B-TREE FOR %s", zUsage)); +} + +/* +** Assign expression b to lvalue a. A second, no-op, version of this macro +** is provided when SQLITE_OMIT_EXPLAIN is defined. This allows the code +** in sqlite3Select() to assign values to structure member variables that +** only exist if SQLITE_OMIT_EXPLAIN is not defined without polluting the +** code with #ifndef directives. +*/ +# define explainSetInteger(a, b) a = b + +#else +/* No-op versions of the explainXXX() functions and macros. */ +# define explainTempTable(y,z) +# define explainSetInteger(y,z) +#endif + + +/* +** If the inner loop was generated using a non-null pOrderBy argument, +** then the results were placed in a sorter. After the loop is terminated +** we need to run the sorter and output the results. The following +** routine generates the code needed to do that. +*/ +static void generateSortTail( + Parse *pParse, /* Parsing context */ + Select *p, /* The SELECT statement */ + SortCtx *pSort, /* Information on the ORDER BY clause */ + int nColumn, /* Number of columns of data */ + SelectDest *pDest /* Write the sorted results here */ +){ + Vdbe *v = pParse->pVdbe; /* The prepared statement */ + int addrBreak = pSort->labelDone; /* Jump here to exit loop */ + int addrContinue = sqlite3VdbeMakeLabel(pParse);/* Jump here for next cycle */ + int addr; /* Top of output loop. Jump for Next. */ + int addrOnce = 0; + int iTab; + ExprList *pOrderBy = pSort->pOrderBy; + int eDest = pDest->eDest; + int iParm = pDest->iSDParm; + int regRow; + int regRowid; + int iCol; + int nKey; /* Number of key columns in sorter record */ + int iSortTab; /* Sorter cursor to read from */ + int i; + int bSeq; /* True if sorter record includes seq. no. */ + int nRefKey = 0; + struct ExprList_item *aOutEx = p->pEList->a; + + assert( addrBreak<0 ); + if( pSort->labelBkOut ){ + sqlite3VdbeAddOp2(v, OP_Gosub, pSort->regReturn, pSort->labelBkOut); + sqlite3VdbeGoto(v, addrBreak); + sqlite3VdbeResolveLabel(v, pSort->labelBkOut); + } + +#ifdef SQLITE_ENABLE_SORTER_REFERENCES + /* Open any cursors needed for sorter-reference expressions */ + for(i=0; inDefer; i++){ + Table *pTab = pSort->aDefer[i].pTab; + int iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema); + sqlite3OpenTable(pParse, pSort->aDefer[i].iCsr, iDb, pTab, OP_OpenRead); + nRefKey = MAX(nRefKey, pSort->aDefer[i].nKey); + } +#endif + + iTab = pSort->iECursor; + if( eDest==SRT_Output || eDest==SRT_Coroutine || eDest==SRT_Mem ){ + regRowid = 0; + regRow = pDest->iSdst; + }else{ + regRowid = sqlite3GetTempReg(pParse); + if( eDest==SRT_EphemTab || eDest==SRT_Table ){ + regRow = sqlite3GetTempReg(pParse); + nColumn = 0; + }else{ + regRow = sqlite3GetTempRange(pParse, nColumn); + } + } + nKey = pOrderBy->nExpr - pSort->nOBSat; + if( pSort->sortFlags & SORTFLAG_UseSorter ){ + int regSortOut = ++pParse->nMem; + iSortTab = pParse->nTab++; + if( pSort->labelBkOut ){ + addrOnce = sqlite3VdbeAddOp0(v, OP_Once); VdbeCoverage(v); + } + sqlite3VdbeAddOp3(v, OP_OpenPseudo, iSortTab, regSortOut, + nKey+1+nColumn+nRefKey); + if( addrOnce ) sqlite3VdbeJumpHere(v, addrOnce); + addr = 1 + sqlite3VdbeAddOp2(v, OP_SorterSort, iTab, addrBreak); + VdbeCoverage(v); + codeOffset(v, p->iOffset, addrContinue); + sqlite3VdbeAddOp3(v, OP_SorterData, iTab, regSortOut, iSortTab); + bSeq = 0; + }else{ + addr = 1 + sqlite3VdbeAddOp2(v, OP_Sort, iTab, addrBreak); VdbeCoverage(v); + codeOffset(v, p->iOffset, addrContinue); + iSortTab = iTab; + bSeq = 1; + } + for(i=0, iCol=nKey+bSeq-1; inDefer ){ + int iKey = iCol+1; + int regKey = sqlite3GetTempRange(pParse, nRefKey); + + for(i=0; inDefer; i++){ + int iCsr = pSort->aDefer[i].iCsr; + Table *pTab = pSort->aDefer[i].pTab; + int nKey = pSort->aDefer[i].nKey; + + sqlite3VdbeAddOp1(v, OP_NullRow, iCsr); + if( HasRowid(pTab) ){ + sqlite3VdbeAddOp3(v, OP_Column, iSortTab, iKey++, regKey); + sqlite3VdbeAddOp3(v, OP_SeekRowid, iCsr, + sqlite3VdbeCurrentAddr(v)+1, regKey); + }else{ + int k; + int iJmp; + assert( sqlite3PrimaryKeyIndex(pTab)->nKeyCol==nKey ); + for(k=0; k=0; i--){ +#ifdef SQLITE_ENABLE_SORTER_REFERENCES + if( aOutEx[i].bSorterRef ){ + sqlite3ExprCode(pParse, aOutEx[i].pExpr, regRow+i); + }else +#endif + { + int iRead; + if( aOutEx[i].u.x.iOrderByCol ){ + iRead = aOutEx[i].u.x.iOrderByCol-1; + }else{ + iRead = iCol--; + } + sqlite3VdbeAddOp3(v, OP_Column, iSortTab, iRead, regRow+i); + VdbeComment((v, "%s", aOutEx[i].zEName)); + } + } + switch( eDest ){ + case SRT_Table: + case SRT_EphemTab: { + sqlite3VdbeAddOp3(v, OP_Column, iSortTab, nKey+bSeq, regRow); + sqlite3VdbeAddOp2(v, OP_NewRowid, iParm, regRowid); + sqlite3VdbeAddOp3(v, OP_Insert, iParm, regRow, regRowid); + sqlite3VdbeChangeP5(v, OPFLAG_APPEND); + break; + } +#ifndef SQLITE_OMIT_SUBQUERY + case SRT_Set: { + assert( nColumn==sqlite3Strlen30(pDest->zAffSdst) ); + sqlite3VdbeAddOp4(v, OP_MakeRecord, regRow, nColumn, regRowid, + pDest->zAffSdst, nColumn); + sqlite3VdbeAddOp4Int(v, OP_IdxInsert, iParm, regRowid, regRow, nColumn); + break; + } + case SRT_Mem: { + /* The LIMIT clause will terminate the loop for us */ + break; + } +#endif + default: { + assert( eDest==SRT_Output || eDest==SRT_Coroutine ); + testcase( eDest==SRT_Output ); + testcase( eDest==SRT_Coroutine ); + if( eDest==SRT_Output ){ + sqlite3VdbeAddOp2(v, OP_ResultRow, pDest->iSdst, nColumn); + }else{ + sqlite3VdbeAddOp1(v, OP_Yield, pDest->iSDParm); + } + break; + } + } + if( regRowid ){ + if( eDest==SRT_Set ){ + sqlite3ReleaseTempRange(pParse, regRow, nColumn); + }else{ + sqlite3ReleaseTempReg(pParse, regRow); + } + sqlite3ReleaseTempReg(pParse, regRowid); + } + /* The bottom of the loop + */ + sqlite3VdbeResolveLabel(v, addrContinue); + if( pSort->sortFlags & SORTFLAG_UseSorter ){ + sqlite3VdbeAddOp2(v, OP_SorterNext, iTab, addr); VdbeCoverage(v); + }else{ + sqlite3VdbeAddOp2(v, OP_Next, iTab, addr); VdbeCoverage(v); + } + if( pSort->regReturn ) sqlite3VdbeAddOp1(v, OP_Return, pSort->regReturn); + sqlite3VdbeResolveLabel(v, addrBreak); +} + +/* +** Return a pointer to a string containing the 'declaration type' of the +** expression pExpr. The string may be treated as static by the caller. +** +** Also try to estimate the size of the returned value and return that +** result in *pEstWidth. +** +** The declaration type is the exact datatype definition extracted from the +** original CREATE TABLE statement if the expression is a column. The +** declaration type for a ROWID field is INTEGER. Exactly when an expression +** is considered a column can be complex in the presence of subqueries. The +** result-set expression in all of the following SELECT statements is +** considered a column by this function. +** +** SELECT col FROM tbl; +** SELECT (SELECT col FROM tbl; +** SELECT (SELECT col FROM tbl); +** SELECT abc FROM (SELECT col AS abc FROM tbl); +** +** The declaration type for any expression other than a column is NULL. +** +** This routine has either 3 or 6 parameters depending on whether or not +** the SQLITE_ENABLE_COLUMN_METADATA compile-time option is used. +*/ +#ifdef SQLITE_ENABLE_COLUMN_METADATA +# define columnType(A,B,C,D,E) columnTypeImpl(A,B,C,D,E) +#else /* if !defined(SQLITE_ENABLE_COLUMN_METADATA) */ +# define columnType(A,B,C,D,E) columnTypeImpl(A,B) +#endif +static const char *columnTypeImpl( + NameContext *pNC, +#ifndef SQLITE_ENABLE_COLUMN_METADATA + Expr *pExpr +#else + Expr *pExpr, + const char **pzOrigDb, + const char **pzOrigTab, + const char **pzOrigCol +#endif +){ + char const *zType = 0; + int j; +#ifdef SQLITE_ENABLE_COLUMN_METADATA + char const *zOrigDb = 0; + char const *zOrigTab = 0; + char const *zOrigCol = 0; +#endif + + assert( pExpr!=0 ); + assert( pNC->pSrcList!=0 ); + switch( pExpr->op ){ + case TK_COLUMN: { + /* The expression is a column. Locate the table the column is being + ** extracted from in NameContext.pSrcList. This table may be real + ** database table or a subquery. + */ + Table *pTab = 0; /* Table structure column is extracted from */ + Select *pS = 0; /* Select the column is extracted from */ + int iCol = pExpr->iColumn; /* Index of column in pTab */ + while( pNC && !pTab ){ + SrcList *pTabList = pNC->pSrcList; + for(j=0;jnSrc && pTabList->a[j].iCursor!=pExpr->iTable;j++); + if( jnSrc ){ + pTab = pTabList->a[j].pTab; + pS = pTabList->a[j].pSelect; + }else{ + pNC = pNC->pNext; + } + } + + if( pTab==0 ){ + /* At one time, code such as "SELECT new.x" within a trigger would + ** cause this condition to run. Since then, we have restructured how + ** trigger code is generated and so this condition is no longer + ** possible. However, it can still be true for statements like + ** the following: + ** + ** CREATE TABLE t1(col INTEGER); + ** SELECT (SELECT t1.col) FROM FROM t1; + ** + ** when columnType() is called on the expression "t1.col" in the + ** sub-select. In this case, set the column type to NULL, even + ** though it should really be "INTEGER". + ** + ** This is not a problem, as the column type of "t1.col" is never + ** used. When columnType() is called on the expression + ** "(SELECT t1.col)", the correct type is returned (see the TK_SELECT + ** branch below. */ + break; + } + + assert( pTab && pExpr->y.pTab==pTab ); + if( pS ){ + /* The "table" is actually a sub-select or a view in the FROM clause + ** of the SELECT statement. Return the declaration type and origin + ** data for the result-set column of the sub-select. + */ + if( iCol>=0 && iColpEList->nExpr ){ + /* If iCol is less than zero, then the expression requests the + ** rowid of the sub-select or view. This expression is legal (see + ** test case misc2.2.2) - it always evaluates to NULL. + */ + NameContext sNC; + Expr *p = pS->pEList->a[iCol].pExpr; + sNC.pSrcList = pS->pSrc; + sNC.pNext = pNC; + sNC.pParse = pNC->pParse; + zType = columnType(&sNC, p,&zOrigDb,&zOrigTab,&zOrigCol); + } + }else{ + /* A real table or a CTE table */ + assert( !pS ); +#ifdef SQLITE_ENABLE_COLUMN_METADATA + if( iCol<0 ) iCol = pTab->iPKey; + assert( iCol==XN_ROWID || (iCol>=0 && iColnCol) ); + if( iCol<0 ){ + zType = "INTEGER"; + zOrigCol = "rowid"; + }else{ + zOrigCol = pTab->aCol[iCol].zName; + zType = sqlite3ColumnType(&pTab->aCol[iCol],0); + } + zOrigTab = pTab->zName; + if( pNC->pParse && pTab->pSchema ){ + int iDb = sqlite3SchemaToIndex(pNC->pParse->db, pTab->pSchema); + zOrigDb = pNC->pParse->db->aDb[iDb].zDbSName; + } +#else + assert( iCol==XN_ROWID || (iCol>=0 && iColnCol) ); + if( iCol<0 ){ + zType = "INTEGER"; + }else{ + zType = sqlite3ColumnType(&pTab->aCol[iCol],0); + } +#endif + } + break; + } +#ifndef SQLITE_OMIT_SUBQUERY + case TK_SELECT: { + /* The expression is a sub-select. Return the declaration type and + ** origin info for the single column in the result set of the SELECT + ** statement. + */ + NameContext sNC; + Select *pS = pExpr->x.pSelect; + Expr *p = pS->pEList->a[0].pExpr; + assert( ExprHasProperty(pExpr, EP_xIsSelect) ); + sNC.pSrcList = pS->pSrc; + sNC.pNext = pNC; + sNC.pParse = pNC->pParse; + zType = columnType(&sNC, p, &zOrigDb, &zOrigTab, &zOrigCol); + break; + } +#endif + } + +#ifdef SQLITE_ENABLE_COLUMN_METADATA + if( pzOrigDb ){ + assert( pzOrigTab && pzOrigCol ); + *pzOrigDb = zOrigDb; + *pzOrigTab = zOrigTab; + *pzOrigCol = zOrigCol; + } +#endif + return zType; +} + +/* +** Generate code that will tell the VDBE the declaration types of columns +** in the result set. +*/ +static void generateColumnTypes( + Parse *pParse, /* Parser context */ + SrcList *pTabList, /* List of tables */ + ExprList *pEList /* Expressions defining the result set */ +){ +#ifndef SQLITE_OMIT_DECLTYPE + Vdbe *v = pParse->pVdbe; + int i; + NameContext sNC; + sNC.pSrcList = pTabList; + sNC.pParse = pParse; + sNC.pNext = 0; + for(i=0; inExpr; i++){ + Expr *p = pEList->a[i].pExpr; + const char *zType; +#ifdef SQLITE_ENABLE_COLUMN_METADATA + const char *zOrigDb = 0; + const char *zOrigTab = 0; + const char *zOrigCol = 0; + zType = columnType(&sNC, p, &zOrigDb, &zOrigTab, &zOrigCol); + + /* The vdbe must make its own copy of the column-type and other + ** column specific strings, in case the schema is reset before this + ** virtual machine is deleted. + */ + sqlite3VdbeSetColName(v, i, COLNAME_DATABASE, zOrigDb, SQLITE_TRANSIENT); + sqlite3VdbeSetColName(v, i, COLNAME_TABLE, zOrigTab, SQLITE_TRANSIENT); + sqlite3VdbeSetColName(v, i, COLNAME_COLUMN, zOrigCol, SQLITE_TRANSIENT); +#else + zType = columnType(&sNC, p, 0, 0, 0); +#endif + sqlite3VdbeSetColName(v, i, COLNAME_DECLTYPE, zType, SQLITE_TRANSIENT); + } +#endif /* !defined(SQLITE_OMIT_DECLTYPE) */ +} + + +/* +** Compute the column names for a SELECT statement. +** +** The only guarantee that SQLite makes about column names is that if the +** column has an AS clause assigning it a name, that will be the name used. +** That is the only documented guarantee. However, countless applications +** developed over the years have made baseless assumptions about column names +** and will break if those assumptions changes. Hence, use extreme caution +** when modifying this routine to avoid breaking legacy. +** +** See Also: sqlite3ColumnsFromExprList() +** +** The PRAGMA short_column_names and PRAGMA full_column_names settings are +** deprecated. The default setting is short=ON, full=OFF. 99.9% of all +** applications should operate this way. Nevertheless, we need to support the +** other modes for legacy: +** +** short=OFF, full=OFF: Column name is the text of the expression has it +** originally appears in the SELECT statement. In +** other words, the zSpan of the result expression. +** +** short=ON, full=OFF: (This is the default setting). If the result +** refers directly to a table column, then the +** result column name is just the table column +** name: COLUMN. Otherwise use zSpan. +** +** full=ON, short=ANY: If the result refers directly to a table column, +** then the result column name with the table name +** prefix, ex: TABLE.COLUMN. Otherwise use zSpan. +*/ +static void generateColumnNames( + Parse *pParse, /* Parser context */ + Select *pSelect /* Generate column names for this SELECT statement */ +){ + Vdbe *v = pParse->pVdbe; + int i; + Table *pTab; + SrcList *pTabList; + ExprList *pEList; + sqlite3 *db = pParse->db; + int fullName; /* TABLE.COLUMN if no AS clause and is a direct table ref */ + int srcName; /* COLUMN or TABLE.COLUMN if no AS clause and is direct */ + +#ifndef SQLITE_OMIT_EXPLAIN + /* If this is an EXPLAIN, skip this step */ + if( pParse->explain ){ + return; + } +#endif + + if( pParse->colNamesSet ) return; + /* Column names are determined by the left-most term of a compound select */ + while( pSelect->pPrior ) pSelect = pSelect->pPrior; + SELECTTRACE(1,pParse,pSelect,("generating column names\n")); + pTabList = pSelect->pSrc; + pEList = pSelect->pEList; + assert( v!=0 ); + assert( pTabList!=0 ); + pParse->colNamesSet = 1; + fullName = (db->flags & SQLITE_FullColNames)!=0; + srcName = (db->flags & SQLITE_ShortColNames)!=0 || fullName; + sqlite3VdbeSetNumCols(v, pEList->nExpr); + for(i=0; inExpr; i++){ + Expr *p = pEList->a[i].pExpr; + + assert( p!=0 ); + assert( p->op!=TK_AGG_COLUMN ); /* Agg processing has not run yet */ + assert( p->op!=TK_COLUMN || p->y.pTab!=0 ); /* Covering idx not yet coded */ + if( pEList->a[i].zEName && pEList->a[i].eEName==ENAME_NAME ){ + /* An AS clause always takes first priority */ + char *zName = pEList->a[i].zEName; + sqlite3VdbeSetColName(v, i, COLNAME_NAME, zName, SQLITE_TRANSIENT); + }else if( srcName && p->op==TK_COLUMN ){ + char *zCol; + int iCol = p->iColumn; + pTab = p->y.pTab; + assert( pTab!=0 ); + if( iCol<0 ) iCol = pTab->iPKey; + assert( iCol==-1 || (iCol>=0 && iColnCol) ); + if( iCol<0 ){ + zCol = "rowid"; + }else{ + zCol = pTab->aCol[iCol].zName; + } + if( fullName ){ + char *zName = 0; + zName = sqlite3MPrintf(db, "%s.%s", pTab->zName, zCol); + sqlite3VdbeSetColName(v, i, COLNAME_NAME, zName, SQLITE_DYNAMIC); + }else{ + sqlite3VdbeSetColName(v, i, COLNAME_NAME, zCol, SQLITE_TRANSIENT); + } + }else{ + const char *z = pEList->a[i].zEName; + z = z==0 ? sqlite3MPrintf(db, "column%d", i+1) : sqlite3DbStrDup(db, z); + sqlite3VdbeSetColName(v, i, COLNAME_NAME, z, SQLITE_DYNAMIC); + } + } + generateColumnTypes(pParse, pTabList, pEList); +} + +/* +** Given an expression list (which is really the list of expressions +** that form the result set of a SELECT statement) compute appropriate +** column names for a table that would hold the expression list. +** +** All column names will be unique. +** +** Only the column names are computed. Column.zType, Column.zColl, +** and other fields of Column are zeroed. +** +** Return SQLITE_OK on success. If a memory allocation error occurs, +** store NULL in *paCol and 0 in *pnCol and return SQLITE_NOMEM. +** +** The only guarantee that SQLite makes about column names is that if the +** column has an AS clause assigning it a name, that will be the name used. +** That is the only documented guarantee. However, countless applications +** developed over the years have made baseless assumptions about column names +** and will break if those assumptions changes. Hence, use extreme caution +** when modifying this routine to avoid breaking legacy. +** +** See Also: generateColumnNames() +*/ +int sqlite3ColumnsFromExprList( + Parse *pParse, /* Parsing context */ + ExprList *pEList, /* Expr list from which to derive column names */ + i16 *pnCol, /* Write the number of columns here */ + Column **paCol /* Write the new column list here */ +){ + sqlite3 *db = pParse->db; /* Database connection */ + int i, j; /* Loop counters */ + u32 cnt; /* Index added to make the name unique */ + Column *aCol, *pCol; /* For looping over result columns */ + int nCol; /* Number of columns in the result set */ + char *zName; /* Column name */ + int nName; /* Size of name in zName[] */ + Hash ht; /* Hash table of column names */ + + sqlite3HashInit(&ht); + if( pEList ){ + nCol = pEList->nExpr; + aCol = sqlite3DbMallocZero(db, sizeof(aCol[0])*nCol); + testcase( aCol==0 ); + if( nCol>32767 ) nCol = 32767; + }else{ + nCol = 0; + aCol = 0; + } + assert( nCol==(i16)nCol ); + *pnCol = nCol; + *paCol = aCol; + + for(i=0, pCol=aCol; imallocFailed; i++, pCol++){ + /* Get an appropriate name for the column + */ + if( (zName = pEList->a[i].zEName)!=0 && pEList->a[i].eEName==ENAME_NAME ){ + /* If the column contains an "AS " phrase, use as the name */ + }else{ + Expr *pColExpr = sqlite3ExprSkipCollateAndLikely(pEList->a[i].pExpr); + while( pColExpr->op==TK_DOT ){ + pColExpr = pColExpr->pRight; + assert( pColExpr!=0 ); + } + if( pColExpr->op==TK_COLUMN ){ + /* For columns use the column name name */ + int iCol = pColExpr->iColumn; + Table *pTab = pColExpr->y.pTab; + assert( pTab!=0 ); + if( iCol<0 ) iCol = pTab->iPKey; + zName = iCol>=0 ? pTab->aCol[iCol].zName : "rowid"; + }else if( pColExpr->op==TK_ID ){ + assert( !ExprHasProperty(pColExpr, EP_IntValue) ); + zName = pColExpr->u.zToken; + }else{ + /* Use the original text of the column expression as its name */ + zName = pEList->a[i].zEName; + } + } + if( zName && !sqlite3IsTrueOrFalse(zName) ){ + zName = sqlite3DbStrDup(db, zName); + }else{ + zName = sqlite3MPrintf(db,"column%d",i+1); + } + + /* Make sure the column name is unique. If the name is not unique, + ** append an integer to the name so that it becomes unique. + */ + cnt = 0; + while( zName && sqlite3HashFind(&ht, zName)!=0 ){ + nName = sqlite3Strlen30(zName); + if( nName>0 ){ + for(j=nName-1; j>0 && sqlite3Isdigit(zName[j]); j--){} + if( zName[j]==':' ) nName = j; + } + zName = sqlite3MPrintf(db, "%.*z:%u", nName, zName, ++cnt); + if( cnt>3 ) sqlite3_randomness(sizeof(cnt), &cnt); + } + pCol->zName = zName; + pCol->hName = sqlite3StrIHash(zName); + sqlite3ColumnPropertiesFromName(0, pCol); + if( zName && sqlite3HashInsert(&ht, zName, pCol)==pCol ){ + sqlite3OomFault(db); + } + } + sqlite3HashClear(&ht); + if( db->mallocFailed ){ + for(j=0; jdb; + NameContext sNC; + Column *pCol; + CollSeq *pColl; + int i; + Expr *p; + struct ExprList_item *a; + + assert( pSelect!=0 ); + assert( (pSelect->selFlags & SF_Resolved)!=0 ); + assert( pTab->nCol==pSelect->pEList->nExpr || db->mallocFailed ); + if( db->mallocFailed ) return; + memset(&sNC, 0, sizeof(sNC)); + sNC.pSrcList = pSelect->pSrc; + a = pSelect->pEList->a; + for(i=0, pCol=pTab->aCol; inCol; i++, pCol++){ + const char *zType; + int n, m; + p = a[i].pExpr; + zType = columnType(&sNC, p, 0, 0, 0); + /* pCol->szEst = ... // Column size est for SELECT tables never used */ + pCol->affinity = sqlite3ExprAffinity(p); + if( zType ){ + m = sqlite3Strlen30(zType); + n = sqlite3Strlen30(pCol->zName); + pCol->zName = sqlite3DbReallocOrFree(db, pCol->zName, n+m+2); + if( pCol->zName ){ + memcpy(&pCol->zName[n+1], zType, m+1); + pCol->colFlags |= COLFLAG_HASTYPE; + } + } + if( pCol->affinity<=SQLITE_AFF_NONE ) pCol->affinity = aff; + pColl = sqlite3ExprCollSeq(pParse, p); + if( pColl && pCol->zColl==0 ){ + pCol->zColl = sqlite3DbStrDup(db, pColl->zName); + } + } + pTab->szTabRow = 1; /* Any non-zero value works */ +} + +/* +** Given a SELECT statement, generate a Table structure that describes +** the result set of that SELECT. +*/ +Table *sqlite3ResultSetOfSelect(Parse *pParse, Select *pSelect, char aff){ + Table *pTab; + sqlite3 *db = pParse->db; + u64 savedFlags; + + savedFlags = db->flags; + db->flags &= ~(u64)SQLITE_FullColNames; + db->flags |= SQLITE_ShortColNames; + sqlite3SelectPrep(pParse, pSelect, 0); + db->flags = savedFlags; + if( pParse->nErr ) return 0; + while( pSelect->pPrior ) pSelect = pSelect->pPrior; + pTab = sqlite3DbMallocZero(db, sizeof(Table) ); + if( pTab==0 ){ + return 0; + } + pTab->nTabRef = 1; + pTab->zName = 0; + pTab->nRowLogEst = 200; assert( 200==sqlite3LogEst(1048576) ); + sqlite3ColumnsFromExprList(pParse, pSelect->pEList, &pTab->nCol, &pTab->aCol); + sqlite3SelectAddColumnTypeAndCollation(pParse, pTab, pSelect, aff); + pTab->iPKey = -1; + if( db->mallocFailed ){ + sqlite3DeleteTable(db, pTab); + return 0; + } + return pTab; +} + +/* +** Get a VDBE for the given parser context. Create a new one if necessary. +** If an error occurs, return NULL and leave a message in pParse. +*/ +Vdbe *sqlite3GetVdbe(Parse *pParse){ + if( pParse->pVdbe ){ + return pParse->pVdbe; + } + if( pParse->pToplevel==0 + && OptimizationEnabled(pParse->db,SQLITE_FactorOutConst) + ){ + pParse->okConstFactor = 1; + } + return sqlite3VdbeCreate(pParse); +} + + +/* +** Compute the iLimit and iOffset fields of the SELECT based on the +** pLimit expressions. pLimit->pLeft and pLimit->pRight hold the expressions +** that appear in the original SQL statement after the LIMIT and OFFSET +** keywords. Or NULL if those keywords are omitted. iLimit and iOffset +** are the integer memory register numbers for counters used to compute +** the limit and offset. If there is no limit and/or offset, then +** iLimit and iOffset are negative. +** +** This routine changes the values of iLimit and iOffset only if +** a limit or offset is defined by pLimit->pLeft and pLimit->pRight. iLimit +** and iOffset should have been preset to appropriate default values (zero) +** prior to calling this routine. +** +** The iOffset register (if it exists) is initialized to the value +** of the OFFSET. The iLimit register is initialized to LIMIT. Register +** iOffset+1 is initialized to LIMIT+OFFSET. +** +** Only if pLimit->pLeft!=0 do the limit registers get +** redefined. The UNION ALL operator uses this property to force +** the reuse of the same limit and offset registers across multiple +** SELECT statements. +*/ +static void computeLimitRegisters(Parse *pParse, Select *p, int iBreak){ + Vdbe *v = 0; + int iLimit = 0; + int iOffset; + int n; + Expr *pLimit = p->pLimit; + + if( p->iLimit ) return; + + /* + ** "LIMIT -1" always shows all rows. There is some + ** controversy about what the correct behavior should be. + ** The current implementation interprets "LIMIT 0" to mean + ** no rows. + */ + if( pLimit ){ + assert( pLimit->op==TK_LIMIT ); + assert( pLimit->pLeft!=0 ); + p->iLimit = iLimit = ++pParse->nMem; + v = sqlite3GetVdbe(pParse); + assert( v!=0 ); + if( sqlite3ExprIsInteger(pLimit->pLeft, &n) ){ + sqlite3VdbeAddOp2(v, OP_Integer, n, iLimit); + VdbeComment((v, "LIMIT counter")); + if( n==0 ){ + sqlite3VdbeGoto(v, iBreak); + }else if( n>=0 && p->nSelectRow>sqlite3LogEst((u64)n) ){ + p->nSelectRow = sqlite3LogEst((u64)n); + p->selFlags |= SF_FixedLimit; + } + }else{ + sqlite3ExprCode(pParse, pLimit->pLeft, iLimit); + sqlite3VdbeAddOp1(v, OP_MustBeInt, iLimit); VdbeCoverage(v); + VdbeComment((v, "LIMIT counter")); + sqlite3VdbeAddOp2(v, OP_IfNot, iLimit, iBreak); VdbeCoverage(v); + } + if( pLimit->pRight ){ + p->iOffset = iOffset = ++pParse->nMem; + pParse->nMem++; /* Allocate an extra register for limit+offset */ + sqlite3ExprCode(pParse, pLimit->pRight, iOffset); + sqlite3VdbeAddOp1(v, OP_MustBeInt, iOffset); VdbeCoverage(v); + VdbeComment((v, "OFFSET counter")); + sqlite3VdbeAddOp3(v, OP_OffsetLimit, iLimit, iOffset+1, iOffset); + VdbeComment((v, "LIMIT+OFFSET")); + } + } +} + +#ifndef SQLITE_OMIT_COMPOUND_SELECT +/* +** Return the appropriate collating sequence for the iCol-th column of +** the result set for the compound-select statement "p". Return NULL if +** the column has no default collating sequence. +** +** The collating sequence for the compound select is taken from the +** left-most term of the select that has a collating sequence. +*/ +static CollSeq *multiSelectCollSeq(Parse *pParse, Select *p, int iCol){ + CollSeq *pRet; + if( p->pPrior ){ + pRet = multiSelectCollSeq(pParse, p->pPrior, iCol); + }else{ + pRet = 0; + } + assert( iCol>=0 ); + /* iCol must be less than p->pEList->nExpr. Otherwise an error would + ** have been thrown during name resolution and we would not have gotten + ** this far */ + if( pRet==0 && ALWAYS(iColpEList->nExpr) ){ + pRet = sqlite3ExprCollSeq(pParse, p->pEList->a[iCol].pExpr); + } + return pRet; +} + +/* +** The select statement passed as the second parameter is a compound SELECT +** with an ORDER BY clause. This function allocates and returns a KeyInfo +** structure suitable for implementing the ORDER BY. +** +** Space to hold the KeyInfo structure is obtained from malloc. The calling +** function is responsible for ensuring that this structure is eventually +** freed. +*/ +static KeyInfo *multiSelectOrderByKeyInfo(Parse *pParse, Select *p, int nExtra){ + ExprList *pOrderBy = p->pOrderBy; + int nOrderBy = p->pOrderBy->nExpr; + sqlite3 *db = pParse->db; + KeyInfo *pRet = sqlite3KeyInfoAlloc(db, nOrderBy+nExtra, 1); + if( pRet ){ + int i; + for(i=0; ia[i]; + Expr *pTerm = pItem->pExpr; + CollSeq *pColl; + + if( pTerm->flags & EP_Collate ){ + pColl = sqlite3ExprCollSeq(pParse, pTerm); + }else{ + pColl = multiSelectCollSeq(pParse, p, pItem->u.x.iOrderByCol-1); + if( pColl==0 ) pColl = db->pDfltColl; + pOrderBy->a[i].pExpr = + sqlite3ExprAddCollateString(pParse, pTerm, pColl->zName); + } + assert( sqlite3KeyInfoIsWriteable(pRet) ); + pRet->aColl[i] = pColl; + pRet->aSortFlags[i] = pOrderBy->a[i].sortFlags; + } + } + + return pRet; +} + +#ifndef SQLITE_OMIT_CTE +/* +** This routine generates VDBE code to compute the content of a WITH RECURSIVE +** query of the form: +** +** AS ( UNION [ALL] ) +** \___________/ \_______________/ +** p->pPrior p +** +** +** There is exactly one reference to the recursive-table in the FROM clause +** of recursive-query, marked with the SrcList->a[].fg.isRecursive flag. +** +** The setup-query runs once to generate an initial set of rows that go +** into a Queue table. Rows are extracted from the Queue table one by +** one. Each row extracted from Queue is output to pDest. Then the single +** extracted row (now in the iCurrent table) becomes the content of the +** recursive-table for a recursive-query run. The output of the recursive-query +** is added back into the Queue table. Then another row is extracted from Queue +** and the iteration continues until the Queue table is empty. +** +** If the compound query operator is UNION then no duplicate rows are ever +** inserted into the Queue table. The iDistinct table keeps a copy of all rows +** that have ever been inserted into Queue and causes duplicates to be +** discarded. If the operator is UNION ALL, then duplicates are allowed. +** +** If the query has an ORDER BY, then entries in the Queue table are kept in +** ORDER BY order and the first entry is extracted for each cycle. Without +** an ORDER BY, the Queue table is just a FIFO. +** +** If a LIMIT clause is provided, then the iteration stops after LIMIT rows +** have been output to pDest. A LIMIT of zero means to output no rows and a +** negative LIMIT means to output all rows. If there is also an OFFSET clause +** with a positive value, then the first OFFSET outputs are discarded rather +** than being sent to pDest. The LIMIT count does not begin until after OFFSET +** rows have been skipped. +*/ +static void generateWithRecursiveQuery( + Parse *pParse, /* Parsing context */ + Select *p, /* The recursive SELECT to be coded */ + SelectDest *pDest /* What to do with query results */ +){ + SrcList *pSrc = p->pSrc; /* The FROM clause of the recursive query */ + int nCol = p->pEList->nExpr; /* Number of columns in the recursive table */ + Vdbe *v = pParse->pVdbe; /* The prepared statement under construction */ + Select *pSetup = p->pPrior; /* The setup query */ + int addrTop; /* Top of the loop */ + int addrCont, addrBreak; /* CONTINUE and BREAK addresses */ + int iCurrent = 0; /* The Current table */ + int regCurrent; /* Register holding Current table */ + int iQueue; /* The Queue table */ + int iDistinct = 0; /* To ensure unique results if UNION */ + int eDest = SRT_Fifo; /* How to write to Queue */ + SelectDest destQueue; /* SelectDest targetting the Queue table */ + int i; /* Loop counter */ + int rc; /* Result code */ + ExprList *pOrderBy; /* The ORDER BY clause */ + Expr *pLimit; /* Saved LIMIT and OFFSET */ + int regLimit, regOffset; /* Registers used by LIMIT and OFFSET */ + +#ifndef SQLITE_OMIT_WINDOWFUNC + if( p->pWin ){ + sqlite3ErrorMsg(pParse, "cannot use window functions in recursive queries"); + return; + } +#endif + + /* Obtain authorization to do a recursive query */ + if( sqlite3AuthCheck(pParse, SQLITE_RECURSIVE, 0, 0, 0) ) return; + + /* Process the LIMIT and OFFSET clauses, if they exist */ + addrBreak = sqlite3VdbeMakeLabel(pParse); + p->nSelectRow = 320; /* 4 billion rows */ + computeLimitRegisters(pParse, p, addrBreak); + pLimit = p->pLimit; + regLimit = p->iLimit; + regOffset = p->iOffset; + p->pLimit = 0; + p->iLimit = p->iOffset = 0; + pOrderBy = p->pOrderBy; + + /* Locate the cursor number of the Current table */ + for(i=0; ALWAYS(inSrc); i++){ + if( pSrc->a[i].fg.isRecursive ){ + iCurrent = pSrc->a[i].iCursor; + break; + } + } + + /* Allocate cursors numbers for Queue and Distinct. The cursor number for + ** the Distinct table must be exactly one greater than Queue in order + ** for the SRT_DistFifo and SRT_DistQueue destinations to work. */ + iQueue = pParse->nTab++; + if( p->op==TK_UNION ){ + eDest = pOrderBy ? SRT_DistQueue : SRT_DistFifo; + iDistinct = pParse->nTab++; + }else{ + eDest = pOrderBy ? SRT_Queue : SRT_Fifo; + } + sqlite3SelectDestInit(&destQueue, eDest, iQueue); + + /* Allocate cursors for Current, Queue, and Distinct. */ + regCurrent = ++pParse->nMem; + sqlite3VdbeAddOp3(v, OP_OpenPseudo, iCurrent, regCurrent, nCol); + if( pOrderBy ){ + KeyInfo *pKeyInfo = multiSelectOrderByKeyInfo(pParse, p, 1); + sqlite3VdbeAddOp4(v, OP_OpenEphemeral, iQueue, pOrderBy->nExpr+2, 0, + (char*)pKeyInfo, P4_KEYINFO); + destQueue.pOrderBy = pOrderBy; + }else{ + sqlite3VdbeAddOp2(v, OP_OpenEphemeral, iQueue, nCol); + } + VdbeComment((v, "Queue table")); + if( iDistinct ){ + p->addrOpenEphm[0] = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, iDistinct, 0); + p->selFlags |= SF_UsesEphemeral; + } + + /* Detach the ORDER BY clause from the compound SELECT */ + p->pOrderBy = 0; + + /* Store the results of the setup-query in Queue. */ + pSetup->pNext = 0; + ExplainQueryPlan((pParse, 1, "SETUP")); + rc = sqlite3Select(pParse, pSetup, &destQueue); + pSetup->pNext = p; + if( rc ) goto end_of_recursive_query; + + /* Find the next row in the Queue and output that row */ + addrTop = sqlite3VdbeAddOp2(v, OP_Rewind, iQueue, addrBreak); VdbeCoverage(v); + + /* Transfer the next row in Queue over to Current */ + sqlite3VdbeAddOp1(v, OP_NullRow, iCurrent); /* To reset column cache */ + if( pOrderBy ){ + sqlite3VdbeAddOp3(v, OP_Column, iQueue, pOrderBy->nExpr+1, regCurrent); + }else{ + sqlite3VdbeAddOp2(v, OP_RowData, iQueue, regCurrent); + } + sqlite3VdbeAddOp1(v, OP_Delete, iQueue); + + /* Output the single row in Current */ + addrCont = sqlite3VdbeMakeLabel(pParse); + codeOffset(v, regOffset, addrCont); + selectInnerLoop(pParse, p, iCurrent, + 0, 0, pDest, addrCont, addrBreak); + if( regLimit ){ + sqlite3VdbeAddOp2(v, OP_DecrJumpZero, regLimit, addrBreak); + VdbeCoverage(v); + } + sqlite3VdbeResolveLabel(v, addrCont); + + /* Execute the recursive SELECT taking the single row in Current as + ** the value for the recursive-table. Store the results in the Queue. + */ + if( p->selFlags & SF_Aggregate ){ + sqlite3ErrorMsg(pParse, "recursive aggregate queries not supported"); + }else{ + p->pPrior = 0; + ExplainQueryPlan((pParse, 1, "RECURSIVE STEP")); + sqlite3Select(pParse, p, &destQueue); + assert( p->pPrior==0 ); + p->pPrior = pSetup; + } + + /* Keep running the loop until the Queue is empty */ + sqlite3VdbeGoto(v, addrTop); + sqlite3VdbeResolveLabel(v, addrBreak); + +end_of_recursive_query: + sqlite3ExprListDelete(pParse->db, p->pOrderBy); + p->pOrderBy = pOrderBy; + p->pLimit = pLimit; + return; +} +#endif /* SQLITE_OMIT_CTE */ + +/* Forward references */ +static int multiSelectOrderBy( + Parse *pParse, /* Parsing context */ + Select *p, /* The right-most of SELECTs to be coded */ + SelectDest *pDest /* What to do with query results */ +); + +/* +** Handle the special case of a compound-select that originates from a +** VALUES clause. By handling this as a special case, we avoid deep +** recursion, and thus do not need to enforce the SQLITE_LIMIT_COMPOUND_SELECT +** on a VALUES clause. +** +** Because the Select object originates from a VALUES clause: +** (1) There is no LIMIT or OFFSET or else there is a LIMIT of exactly 1 +** (2) All terms are UNION ALL +** (3) There is no ORDER BY clause +** +** The "LIMIT of exactly 1" case of condition (1) comes about when a VALUES +** clause occurs within scalar expression (ex: "SELECT (VALUES(1),(2),(3))"). +** The sqlite3CodeSubselect will have added the LIMIT 1 clause in tht case. +** Since the limit is exactly 1, we only need to evalutes the left-most VALUES. +*/ +static int multiSelectValues( + Parse *pParse, /* Parsing context */ + Select *p, /* The right-most of SELECTs to be coded */ + SelectDest *pDest /* What to do with query results */ +){ + int nRow = 1; + int rc = 0; + int bShowAll = p->pLimit==0; + assert( p->selFlags & SF_MultiValue ); + do{ + assert( p->selFlags & SF_Values ); + assert( p->op==TK_ALL || (p->op==TK_SELECT && p->pPrior==0) ); + assert( p->pNext==0 || p->pEList->nExpr==p->pNext->pEList->nExpr ); +#ifndef SQLITE_OMIT_WINDOWFUNC + if( p->pWin ) return -1; +#endif + if( p->pPrior==0 ) break; + assert( p->pPrior->pNext==p ); + p = p->pPrior; + nRow += bShowAll; + }while(1); + ExplainQueryPlan((pParse, 0, "SCAN %d CONSTANT ROW%s", nRow, + nRow==1 ? "" : "S")); + while( p ){ + selectInnerLoop(pParse, p, -1, 0, 0, pDest, 1, 1); + if( !bShowAll ) break; + p->nSelectRow = nRow; + p = p->pNext; + } + return rc; +} + +/* +** This routine is called to process a compound query form from +** two or more separate queries using UNION, UNION ALL, EXCEPT, or +** INTERSECT +** +** "p" points to the right-most of the two queries. the query on the +** left is p->pPrior. The left query could also be a compound query +** in which case this routine will be called recursively. +** +** The results of the total query are to be written into a destination +** of type eDest with parameter iParm. +** +** Example 1: Consider a three-way compound SQL statement. +** +** SELECT a FROM t1 UNION SELECT b FROM t2 UNION SELECT c FROM t3 +** +** This statement is parsed up as follows: +** +** SELECT c FROM t3 +** | +** `-----> SELECT b FROM t2 +** | +** `------> SELECT a FROM t1 +** +** The arrows in the diagram above represent the Select.pPrior pointer. +** So if this routine is called with p equal to the t3 query, then +** pPrior will be the t2 query. p->op will be TK_UNION in this case. +** +** Notice that because of the way SQLite parses compound SELECTs, the +** individual selects always group from left to right. +*/ +static int multiSelect( + Parse *pParse, /* Parsing context */ + Select *p, /* The right-most of SELECTs to be coded */ + SelectDest *pDest /* What to do with query results */ +){ + int rc = SQLITE_OK; /* Success code from a subroutine */ + Select *pPrior; /* Another SELECT immediately to our left */ + Vdbe *v; /* Generate code to this VDBE */ + SelectDest dest; /* Alternative data destination */ + Select *pDelete = 0; /* Chain of simple selects to delete */ + sqlite3 *db; /* Database connection */ + + /* Make sure there is no ORDER BY or LIMIT clause on prior SELECTs. Only + ** the last (right-most) SELECT in the series may have an ORDER BY or LIMIT. + */ + assert( p && p->pPrior ); /* Calling function guarantees this much */ + assert( (p->selFlags & SF_Recursive)==0 || p->op==TK_ALL || p->op==TK_UNION ); + assert( p->selFlags & SF_Compound ); + db = pParse->db; + pPrior = p->pPrior; + dest = *pDest; + if( pPrior->pOrderBy || pPrior->pLimit ){ + sqlite3ErrorMsg(pParse,"%s clause should come after %s not before", + pPrior->pOrderBy!=0 ? "ORDER BY" : "LIMIT", selectOpName(p->op)); + rc = 1; + goto multi_select_end; + } + + v = sqlite3GetVdbe(pParse); + assert( v!=0 ); /* The VDBE already created by calling function */ + + /* Create the destination temporary table if necessary + */ + if( dest.eDest==SRT_EphemTab ){ + assert( p->pEList ); + sqlite3VdbeAddOp2(v, OP_OpenEphemeral, dest.iSDParm, p->pEList->nExpr); + dest.eDest = SRT_Table; + } + + /* Special handling for a compound-select that originates as a VALUES clause. + */ + if( p->selFlags & SF_MultiValue ){ + rc = multiSelectValues(pParse, p, &dest); + if( rc>=0 ) goto multi_select_end; + rc = SQLITE_OK; + } + + /* Make sure all SELECTs in the statement have the same number of elements + ** in their result sets. + */ + assert( p->pEList && pPrior->pEList ); + assert( p->pEList->nExpr==pPrior->pEList->nExpr ); + +#ifndef SQLITE_OMIT_CTE + if( p->selFlags & SF_Recursive ){ + generateWithRecursiveQuery(pParse, p, &dest); + }else +#endif + + /* Compound SELECTs that have an ORDER BY clause are handled separately. + */ + if( p->pOrderBy ){ + return multiSelectOrderBy(pParse, p, pDest); + }else{ + +#ifndef SQLITE_OMIT_EXPLAIN + if( pPrior->pPrior==0 ){ + ExplainQueryPlan((pParse, 1, "COMPOUND QUERY")); + ExplainQueryPlan((pParse, 1, "LEFT-MOST SUBQUERY")); + } +#endif + + /* Generate code for the left and right SELECT statements. + */ + switch( p->op ){ + case TK_ALL: { + int addr = 0; + int nLimit; + assert( !pPrior->pLimit ); + pPrior->iLimit = p->iLimit; + pPrior->iOffset = p->iOffset; + pPrior->pLimit = p->pLimit; + rc = sqlite3Select(pParse, pPrior, &dest); + p->pLimit = 0; + if( rc ){ + goto multi_select_end; + } + p->pPrior = 0; + p->iLimit = pPrior->iLimit; + p->iOffset = pPrior->iOffset; + if( p->iLimit ){ + addr = sqlite3VdbeAddOp1(v, OP_IfNot, p->iLimit); VdbeCoverage(v); + VdbeComment((v, "Jump ahead if LIMIT reached")); + if( p->iOffset ){ + sqlite3VdbeAddOp3(v, OP_OffsetLimit, + p->iLimit, p->iOffset+1, p->iOffset); + } + } + ExplainQueryPlan((pParse, 1, "UNION ALL")); + rc = sqlite3Select(pParse, p, &dest); + testcase( rc!=SQLITE_OK ); + pDelete = p->pPrior; + p->pPrior = pPrior; + p->nSelectRow = sqlite3LogEstAdd(p->nSelectRow, pPrior->nSelectRow); + if( pPrior->pLimit + && sqlite3ExprIsInteger(pPrior->pLimit->pLeft, &nLimit) + && nLimit>0 && p->nSelectRow > sqlite3LogEst((u64)nLimit) + ){ + p->nSelectRow = sqlite3LogEst((u64)nLimit); + } + if( addr ){ + sqlite3VdbeJumpHere(v, addr); + } + break; + } + case TK_EXCEPT: + case TK_UNION: { + int unionTab; /* Cursor number of the temp table holding result */ + u8 op = 0; /* One of the SRT_ operations to apply to self */ + int priorOp; /* The SRT_ operation to apply to prior selects */ + Expr *pLimit; /* Saved values of p->nLimit */ + int addr; + SelectDest uniondest; + + testcase( p->op==TK_EXCEPT ); + testcase( p->op==TK_UNION ); + priorOp = SRT_Union; + if( dest.eDest==priorOp ){ + /* We can reuse a temporary table generated by a SELECT to our + ** right. + */ + assert( p->pLimit==0 ); /* Not allowed on leftward elements */ + unionTab = dest.iSDParm; + }else{ + /* We will need to create our own temporary table to hold the + ** intermediate results. + */ + unionTab = pParse->nTab++; + assert( p->pOrderBy==0 ); + addr = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, unionTab, 0); + assert( p->addrOpenEphm[0] == -1 ); + p->addrOpenEphm[0] = addr; + findRightmost(p)->selFlags |= SF_UsesEphemeral; + assert( p->pEList ); + } + + /* Code the SELECT statements to our left + */ + assert( !pPrior->pOrderBy ); + sqlite3SelectDestInit(&uniondest, priorOp, unionTab); + rc = sqlite3Select(pParse, pPrior, &uniondest); + if( rc ){ + goto multi_select_end; + } + + /* Code the current SELECT statement + */ + if( p->op==TK_EXCEPT ){ + op = SRT_Except; + }else{ + assert( p->op==TK_UNION ); + op = SRT_Union; + } + p->pPrior = 0; + pLimit = p->pLimit; + p->pLimit = 0; + uniondest.eDest = op; + ExplainQueryPlan((pParse, 1, "%s USING TEMP B-TREE", + selectOpName(p->op))); + rc = sqlite3Select(pParse, p, &uniondest); + testcase( rc!=SQLITE_OK ); + /* Query flattening in sqlite3Select() might refill p->pOrderBy. + ** Be sure to delete p->pOrderBy, therefore, to avoid a memory leak. */ + sqlite3ExprListDelete(db, p->pOrderBy); + pDelete = p->pPrior; + p->pPrior = pPrior; + p->pOrderBy = 0; + if( p->op==TK_UNION ){ + p->nSelectRow = sqlite3LogEstAdd(p->nSelectRow, pPrior->nSelectRow); + } + sqlite3ExprDelete(db, p->pLimit); + p->pLimit = pLimit; + p->iLimit = 0; + p->iOffset = 0; + + /* Convert the data in the temporary table into whatever form + ** it is that we currently need. + */ + assert( unionTab==dest.iSDParm || dest.eDest!=priorOp ); + assert( p->pEList || db->mallocFailed ); + if( dest.eDest!=priorOp && db->mallocFailed==0 ){ + int iCont, iBreak, iStart; + iBreak = sqlite3VdbeMakeLabel(pParse); + iCont = sqlite3VdbeMakeLabel(pParse); + computeLimitRegisters(pParse, p, iBreak); + sqlite3VdbeAddOp2(v, OP_Rewind, unionTab, iBreak); VdbeCoverage(v); + iStart = sqlite3VdbeCurrentAddr(v); + selectInnerLoop(pParse, p, unionTab, + 0, 0, &dest, iCont, iBreak); + sqlite3VdbeResolveLabel(v, iCont); + sqlite3VdbeAddOp2(v, OP_Next, unionTab, iStart); VdbeCoverage(v); + sqlite3VdbeResolveLabel(v, iBreak); + sqlite3VdbeAddOp2(v, OP_Close, unionTab, 0); + } + break; + } + default: assert( p->op==TK_INTERSECT ); { + int tab1, tab2; + int iCont, iBreak, iStart; + Expr *pLimit; + int addr; + SelectDest intersectdest; + int r1; + + /* INTERSECT is different from the others since it requires + ** two temporary tables. Hence it has its own case. Begin + ** by allocating the tables we will need. + */ + tab1 = pParse->nTab++; + tab2 = pParse->nTab++; + assert( p->pOrderBy==0 ); + + addr = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, tab1, 0); + assert( p->addrOpenEphm[0] == -1 ); + p->addrOpenEphm[0] = addr; + findRightmost(p)->selFlags |= SF_UsesEphemeral; + assert( p->pEList ); + + /* Code the SELECTs to our left into temporary table "tab1". + */ + sqlite3SelectDestInit(&intersectdest, SRT_Union, tab1); + rc = sqlite3Select(pParse, pPrior, &intersectdest); + if( rc ){ + goto multi_select_end; + } + + /* Code the current SELECT into temporary table "tab2" + */ + addr = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, tab2, 0); + assert( p->addrOpenEphm[1] == -1 ); + p->addrOpenEphm[1] = addr; + p->pPrior = 0; + pLimit = p->pLimit; + p->pLimit = 0; + intersectdest.iSDParm = tab2; + ExplainQueryPlan((pParse, 1, "%s USING TEMP B-TREE", + selectOpName(p->op))); + rc = sqlite3Select(pParse, p, &intersectdest); + testcase( rc!=SQLITE_OK ); + pDelete = p->pPrior; + p->pPrior = pPrior; + if( p->nSelectRow>pPrior->nSelectRow ){ + p->nSelectRow = pPrior->nSelectRow; + } + sqlite3ExprDelete(db, p->pLimit); + p->pLimit = pLimit; + + /* Generate code to take the intersection of the two temporary + ** tables. + */ + if( rc ) break; + assert( p->pEList ); + iBreak = sqlite3VdbeMakeLabel(pParse); + iCont = sqlite3VdbeMakeLabel(pParse); + computeLimitRegisters(pParse, p, iBreak); + sqlite3VdbeAddOp2(v, OP_Rewind, tab1, iBreak); VdbeCoverage(v); + r1 = sqlite3GetTempReg(pParse); + iStart = sqlite3VdbeAddOp2(v, OP_RowData, tab1, r1); + sqlite3VdbeAddOp4Int(v, OP_NotFound, tab2, iCont, r1, 0); + VdbeCoverage(v); + sqlite3ReleaseTempReg(pParse, r1); + selectInnerLoop(pParse, p, tab1, + 0, 0, &dest, iCont, iBreak); + sqlite3VdbeResolveLabel(v, iCont); + sqlite3VdbeAddOp2(v, OP_Next, tab1, iStart); VdbeCoverage(v); + sqlite3VdbeResolveLabel(v, iBreak); + sqlite3VdbeAddOp2(v, OP_Close, tab2, 0); + sqlite3VdbeAddOp2(v, OP_Close, tab1, 0); + break; + } + } + + #ifndef SQLITE_OMIT_EXPLAIN + if( p->pNext==0 ){ + ExplainQueryPlanPop(pParse); + } + #endif + } + if( pParse->nErr ) goto multi_select_end; + + /* Compute collating sequences used by + ** temporary tables needed to implement the compound select. + ** Attach the KeyInfo structure to all temporary tables. + ** + ** This section is run by the right-most SELECT statement only. + ** SELECT statements to the left always skip this part. The right-most + ** SELECT might also skip this part if it has no ORDER BY clause and + ** no temp tables are required. + */ + if( p->selFlags & SF_UsesEphemeral ){ + int i; /* Loop counter */ + KeyInfo *pKeyInfo; /* Collating sequence for the result set */ + Select *pLoop; /* For looping through SELECT statements */ + CollSeq **apColl; /* For looping through pKeyInfo->aColl[] */ + int nCol; /* Number of columns in result set */ + + assert( p->pNext==0 ); + nCol = p->pEList->nExpr; + pKeyInfo = sqlite3KeyInfoAlloc(db, nCol, 1); + if( !pKeyInfo ){ + rc = SQLITE_NOMEM_BKPT; + goto multi_select_end; + } + for(i=0, apColl=pKeyInfo->aColl; ipDfltColl; + } + } + + for(pLoop=p; pLoop; pLoop=pLoop->pPrior){ + for(i=0; i<2; i++){ + int addr = pLoop->addrOpenEphm[i]; + if( addr<0 ){ + /* If [0] is unused then [1] is also unused. So we can + ** always safely abort as soon as the first unused slot is found */ + assert( pLoop->addrOpenEphm[1]<0 ); + break; + } + sqlite3VdbeChangeP2(v, addr, nCol); + sqlite3VdbeChangeP4(v, addr, (char*)sqlite3KeyInfoRef(pKeyInfo), + P4_KEYINFO); + pLoop->addrOpenEphm[i] = -1; + } + } + sqlite3KeyInfoUnref(pKeyInfo); + } + +multi_select_end: + pDest->iSdst = dest.iSdst; + pDest->nSdst = dest.nSdst; + sqlite3SelectDelete(db, pDelete); + return rc; +} +#endif /* SQLITE_OMIT_COMPOUND_SELECT */ + +/* +** Error message for when two or more terms of a compound select have different +** size result sets. +*/ +void sqlite3SelectWrongNumTermsError(Parse *pParse, Select *p){ + if( p->selFlags & SF_Values ){ + sqlite3ErrorMsg(pParse, "all VALUES must have the same number of terms"); + }else{ + sqlite3ErrorMsg(pParse, "SELECTs to the left and right of %s" + " do not have the same number of result columns", selectOpName(p->op)); + } +} + +/* +** Code an output subroutine for a coroutine implementation of a +** SELECT statment. +** +** The data to be output is contained in pIn->iSdst. There are +** pIn->nSdst columns to be output. pDest is where the output should +** be sent. +** +** regReturn is the number of the register holding the subroutine +** return address. +** +** If regPrev>0 then it is the first register in a vector that +** records the previous output. mem[regPrev] is a flag that is false +** if there has been no previous output. If regPrev>0 then code is +** generated to suppress duplicates. pKeyInfo is used for comparing +** keys. +** +** If the LIMIT found in p->iLimit is reached, jump immediately to +** iBreak. +*/ +static int generateOutputSubroutine( + Parse *pParse, /* Parsing context */ + Select *p, /* The SELECT statement */ + SelectDest *pIn, /* Coroutine supplying data */ + SelectDest *pDest, /* Where to send the data */ + int regReturn, /* The return address register */ + int regPrev, /* Previous result register. No uniqueness if 0 */ + KeyInfo *pKeyInfo, /* For comparing with previous entry */ + int iBreak /* Jump here if we hit the LIMIT */ +){ + Vdbe *v = pParse->pVdbe; + int iContinue; + int addr; + + addr = sqlite3VdbeCurrentAddr(v); + iContinue = sqlite3VdbeMakeLabel(pParse); + + /* Suppress duplicates for UNION, EXCEPT, and INTERSECT + */ + if( regPrev ){ + int addr1, addr2; + addr1 = sqlite3VdbeAddOp1(v, OP_IfNot, regPrev); VdbeCoverage(v); + addr2 = sqlite3VdbeAddOp4(v, OP_Compare, pIn->iSdst, regPrev+1, pIn->nSdst, + (char*)sqlite3KeyInfoRef(pKeyInfo), P4_KEYINFO); + sqlite3VdbeAddOp3(v, OP_Jump, addr2+2, iContinue, addr2+2); VdbeCoverage(v); + sqlite3VdbeJumpHere(v, addr1); + sqlite3VdbeAddOp3(v, OP_Copy, pIn->iSdst, regPrev+1, pIn->nSdst-1); + sqlite3VdbeAddOp2(v, OP_Integer, 1, regPrev); + } + if( pParse->db->mallocFailed ) return 0; + + /* Suppress the first OFFSET entries if there is an OFFSET clause + */ + codeOffset(v, p->iOffset, iContinue); + + assert( pDest->eDest!=SRT_Exists ); + assert( pDest->eDest!=SRT_Table ); + switch( pDest->eDest ){ + /* Store the result as data using a unique key. + */ + case SRT_EphemTab: { + int r1 = sqlite3GetTempReg(pParse); + int r2 = sqlite3GetTempReg(pParse); + sqlite3VdbeAddOp3(v, OP_MakeRecord, pIn->iSdst, pIn->nSdst, r1); + sqlite3VdbeAddOp2(v, OP_NewRowid, pDest->iSDParm, r2); + sqlite3VdbeAddOp3(v, OP_Insert, pDest->iSDParm, r1, r2); + sqlite3VdbeChangeP5(v, OPFLAG_APPEND); + sqlite3ReleaseTempReg(pParse, r2); + sqlite3ReleaseTempReg(pParse, r1); + break; + } + +#ifndef SQLITE_OMIT_SUBQUERY + /* If we are creating a set for an "expr IN (SELECT ...)". + */ + case SRT_Set: { + int r1; + testcase( pIn->nSdst>1 ); + r1 = sqlite3GetTempReg(pParse); + sqlite3VdbeAddOp4(v, OP_MakeRecord, pIn->iSdst, pIn->nSdst, + r1, pDest->zAffSdst, pIn->nSdst); + sqlite3VdbeAddOp4Int(v, OP_IdxInsert, pDest->iSDParm, r1, + pIn->iSdst, pIn->nSdst); + sqlite3ReleaseTempReg(pParse, r1); + break; + } + + /* If this is a scalar select that is part of an expression, then + ** store the results in the appropriate memory cell and break out + ** of the scan loop. Note that the select might return multiple columns + ** if it is the RHS of a row-value IN operator. + */ + case SRT_Mem: { + if( pParse->nErr==0 ){ + testcase( pIn->nSdst>1 ); + sqlite3ExprCodeMove(pParse, pIn->iSdst, pDest->iSDParm, pIn->nSdst); + } + /* The LIMIT clause will jump out of the loop for us */ + break; + } +#endif /* #ifndef SQLITE_OMIT_SUBQUERY */ + + /* The results are stored in a sequence of registers + ** starting at pDest->iSdst. Then the co-routine yields. + */ + case SRT_Coroutine: { + if( pDest->iSdst==0 ){ + pDest->iSdst = sqlite3GetTempRange(pParse, pIn->nSdst); + pDest->nSdst = pIn->nSdst; + } + sqlite3ExprCodeMove(pParse, pIn->iSdst, pDest->iSdst, pIn->nSdst); + sqlite3VdbeAddOp1(v, OP_Yield, pDest->iSDParm); + break; + } + + /* If none of the above, then the result destination must be + ** SRT_Output. This routine is never called with any other + ** destination other than the ones handled above or SRT_Output. + ** + ** For SRT_Output, results are stored in a sequence of registers. + ** Then the OP_ResultRow opcode is used to cause sqlite3_step() to + ** return the next row of result. + */ + default: { + assert( pDest->eDest==SRT_Output ); + sqlite3VdbeAddOp2(v, OP_ResultRow, pIn->iSdst, pIn->nSdst); + break; + } + } + + /* Jump to the end of the loop if the LIMIT is reached. + */ + if( p->iLimit ){ + sqlite3VdbeAddOp2(v, OP_DecrJumpZero, p->iLimit, iBreak); VdbeCoverage(v); + } + + /* Generate the subroutine return + */ + sqlite3VdbeResolveLabel(v, iContinue); + sqlite3VdbeAddOp1(v, OP_Return, regReturn); + + return addr; +} + +/* +** Alternative compound select code generator for cases when there +** is an ORDER BY clause. +** +** We assume a query of the following form: +** +** ORDER BY +** +** is one of UNION ALL, UNION, EXCEPT, or INTERSECT. The idea +** is to code both and with the ORDER BY clause as +** co-routines. Then run the co-routines in parallel and merge the results +** into the output. In addition to the two coroutines (called selectA and +** selectB) there are 7 subroutines: +** +** outA: Move the output of the selectA coroutine into the output +** of the compound query. +** +** outB: Move the output of the selectB coroutine into the output +** of the compound query. (Only generated for UNION and +** UNION ALL. EXCEPT and INSERTSECT never output a row that +** appears only in B.) +** +** AltB: Called when there is data from both coroutines and AB. +** +** EofA: Called when data is exhausted from selectA. +** +** EofB: Called when data is exhausted from selectB. +** +** The implementation of the latter five subroutines depend on which +** is used: +** +** +** UNION ALL UNION EXCEPT INTERSECT +** ------------- ----------------- -------------- ----------------- +** AltB: outA, nextA outA, nextA outA, nextA nextA +** +** AeqB: outA, nextA nextA nextA outA, nextA +** +** AgtB: outB, nextB outB, nextB nextB nextB +** +** EofA: outB, nextB outB, nextB halt halt +** +** EofB: outA, nextA outA, nextA outA, nextA halt +** +** In the AltB, AeqB, and AgtB subroutines, an EOF on A following nextA +** causes an immediate jump to EofA and an EOF on B following nextB causes +** an immediate jump to EofB. Within EofA and EofB, and EOF on entry or +** following nextX causes a jump to the end of the select processing. +** +** Duplicate removal in the UNION, EXCEPT, and INTERSECT cases is handled +** within the output subroutine. The regPrev register set holds the previously +** output value. A comparison is made against this value and the output +** is skipped if the next results would be the same as the previous. +** +** The implementation plan is to implement the two coroutines and seven +** subroutines first, then put the control logic at the bottom. Like this: +** +** goto Init +** coA: coroutine for left query (A) +** coB: coroutine for right query (B) +** outA: output one row of A +** outB: output one row of B (UNION and UNION ALL only) +** EofA: ... +** EofB: ... +** AltB: ... +** AeqB: ... +** AgtB: ... +** Init: initialize coroutine registers +** yield coA +** if eof(A) goto EofA +** yield coB +** if eof(B) goto EofB +** Cmpr: Compare A, B +** Jump AltB, AeqB, AgtB +** End: ... +** +** We call AltB, AeqB, AgtB, EofA, and EofB "subroutines" but they are not +** actually called using Gosub and they do not Return. EofA and EofB loop +** until all data is exhausted then jump to the "end" labe. AltB, AeqB, +** and AgtB jump to either L2 or to one of EofA or EofB. +*/ +#ifndef SQLITE_OMIT_COMPOUND_SELECT +static int multiSelectOrderBy( + Parse *pParse, /* Parsing context */ + Select *p, /* The right-most of SELECTs to be coded */ + SelectDest *pDest /* What to do with query results */ +){ + int i, j; /* Loop counters */ + Select *pPrior; /* Another SELECT immediately to our left */ + Vdbe *v; /* Generate code to this VDBE */ + SelectDest destA; /* Destination for coroutine A */ + SelectDest destB; /* Destination for coroutine B */ + int regAddrA; /* Address register for select-A coroutine */ + int regAddrB; /* Address register for select-B coroutine */ + int addrSelectA; /* Address of the select-A coroutine */ + int addrSelectB; /* Address of the select-B coroutine */ + int regOutA; /* Address register for the output-A subroutine */ + int regOutB; /* Address register for the output-B subroutine */ + int addrOutA; /* Address of the output-A subroutine */ + int addrOutB = 0; /* Address of the output-B subroutine */ + int addrEofA; /* Address of the select-A-exhausted subroutine */ + int addrEofA_noB; /* Alternate addrEofA if B is uninitialized */ + int addrEofB; /* Address of the select-B-exhausted subroutine */ + int addrAltB; /* Address of the AB subroutine */ + int regLimitA; /* Limit register for select-A */ + int regLimitB; /* Limit register for select-A */ + int regPrev; /* A range of registers to hold previous output */ + int savedLimit; /* Saved value of p->iLimit */ + int savedOffset; /* Saved value of p->iOffset */ + int labelCmpr; /* Label for the start of the merge algorithm */ + int labelEnd; /* Label for the end of the overall SELECT stmt */ + int addr1; /* Jump instructions that get retargetted */ + int op; /* One of TK_ALL, TK_UNION, TK_EXCEPT, TK_INTERSECT */ + KeyInfo *pKeyDup = 0; /* Comparison information for duplicate removal */ + KeyInfo *pKeyMerge; /* Comparison information for merging rows */ + sqlite3 *db; /* Database connection */ + ExprList *pOrderBy; /* The ORDER BY clause */ + int nOrderBy; /* Number of terms in the ORDER BY clause */ + int *aPermute; /* Mapping from ORDER BY terms to result set columns */ + + assert( p->pOrderBy!=0 ); + assert( pKeyDup==0 ); /* "Managed" code needs this. Ticket #3382. */ + db = pParse->db; + v = pParse->pVdbe; + assert( v!=0 ); /* Already thrown the error if VDBE alloc failed */ + labelEnd = sqlite3VdbeMakeLabel(pParse); + labelCmpr = sqlite3VdbeMakeLabel(pParse); + + + /* Patch up the ORDER BY clause + */ + op = p->op; + pPrior = p->pPrior; + assert( pPrior->pOrderBy==0 ); + pOrderBy = p->pOrderBy; + assert( pOrderBy ); + nOrderBy = pOrderBy->nExpr; + + /* For operators other than UNION ALL we have to make sure that + ** the ORDER BY clause covers every term of the result set. Add + ** terms to the ORDER BY clause as necessary. + */ + if( op!=TK_ALL ){ + for(i=1; db->mallocFailed==0 && i<=p->pEList->nExpr; i++){ + struct ExprList_item *pItem; + for(j=0, pItem=pOrderBy->a; ju.x.iOrderByCol>0 ); + if( pItem->u.x.iOrderByCol==i ) break; + } + if( j==nOrderBy ){ + Expr *pNew = sqlite3Expr(db, TK_INTEGER, 0); + if( pNew==0 ) return SQLITE_NOMEM_BKPT; + pNew->flags |= EP_IntValue; + pNew->u.iValue = i; + p->pOrderBy = pOrderBy = sqlite3ExprListAppend(pParse, pOrderBy, pNew); + if( pOrderBy ) pOrderBy->a[nOrderBy++].u.x.iOrderByCol = (u16)i; + } + } + } + + /* Compute the comparison permutation and keyinfo that is used with + ** the permutation used to determine if the next + ** row of results comes from selectA or selectB. Also add explicit + ** collations to the ORDER BY clause terms so that when the subqueries + ** to the right and the left are evaluated, they use the correct + ** collation. + */ + aPermute = sqlite3DbMallocRawNN(db, sizeof(int)*(nOrderBy + 1)); + if( aPermute ){ + struct ExprList_item *pItem; + aPermute[0] = nOrderBy; + for(i=1, pItem=pOrderBy->a; i<=nOrderBy; i++, pItem++){ + assert( pItem->u.x.iOrderByCol>0 ); + assert( pItem->u.x.iOrderByCol<=p->pEList->nExpr ); + aPermute[i] = pItem->u.x.iOrderByCol - 1; + } + pKeyMerge = multiSelectOrderByKeyInfo(pParse, p, 1); + }else{ + pKeyMerge = 0; + } + + /* Reattach the ORDER BY clause to the query. + */ + p->pOrderBy = pOrderBy; + pPrior->pOrderBy = sqlite3ExprListDup(pParse->db, pOrderBy, 0); + + /* Allocate a range of temporary registers and the KeyInfo needed + ** for the logic that removes duplicate result rows when the + ** operator is UNION, EXCEPT, or INTERSECT (but not UNION ALL). + */ + if( op==TK_ALL ){ + regPrev = 0; + }else{ + int nExpr = p->pEList->nExpr; + assert( nOrderBy>=nExpr || db->mallocFailed ); + regPrev = pParse->nMem+1; + pParse->nMem += nExpr+1; + sqlite3VdbeAddOp2(v, OP_Integer, 0, regPrev); + pKeyDup = sqlite3KeyInfoAlloc(db, nExpr, 1); + if( pKeyDup ){ + assert( sqlite3KeyInfoIsWriteable(pKeyDup) ); + for(i=0; iaColl[i] = multiSelectCollSeq(pParse, p, i); + pKeyDup->aSortFlags[i] = 0; + } + } + } + + /* Separate the left and the right query from one another + */ + p->pPrior = 0; + pPrior->pNext = 0; + sqlite3ResolveOrderGroupBy(pParse, p, p->pOrderBy, "ORDER"); + if( pPrior->pPrior==0 ){ + sqlite3ResolveOrderGroupBy(pParse, pPrior, pPrior->pOrderBy, "ORDER"); + } + + /* Compute the limit registers */ + computeLimitRegisters(pParse, p, labelEnd); + if( p->iLimit && op==TK_ALL ){ + regLimitA = ++pParse->nMem; + regLimitB = ++pParse->nMem; + sqlite3VdbeAddOp2(v, OP_Copy, p->iOffset ? p->iOffset+1 : p->iLimit, + regLimitA); + sqlite3VdbeAddOp2(v, OP_Copy, regLimitA, regLimitB); + }else{ + regLimitA = regLimitB = 0; + } + sqlite3ExprDelete(db, p->pLimit); + p->pLimit = 0; + + regAddrA = ++pParse->nMem; + regAddrB = ++pParse->nMem; + regOutA = ++pParse->nMem; + regOutB = ++pParse->nMem; + sqlite3SelectDestInit(&destA, SRT_Coroutine, regAddrA); + sqlite3SelectDestInit(&destB, SRT_Coroutine, regAddrB); + + ExplainQueryPlan((pParse, 1, "MERGE (%s)", selectOpName(p->op))); + + /* Generate a coroutine to evaluate the SELECT statement to the + ** left of the compound operator - the "A" select. + */ + addrSelectA = sqlite3VdbeCurrentAddr(v) + 1; + addr1 = sqlite3VdbeAddOp3(v, OP_InitCoroutine, regAddrA, 0, addrSelectA); + VdbeComment((v, "left SELECT")); + pPrior->iLimit = regLimitA; + ExplainQueryPlan((pParse, 1, "LEFT")); + sqlite3Select(pParse, pPrior, &destA); + sqlite3VdbeEndCoroutine(v, regAddrA); + sqlite3VdbeJumpHere(v, addr1); + + /* Generate a coroutine to evaluate the SELECT statement on + ** the right - the "B" select + */ + addrSelectB = sqlite3VdbeCurrentAddr(v) + 1; + addr1 = sqlite3VdbeAddOp3(v, OP_InitCoroutine, regAddrB, 0, addrSelectB); + VdbeComment((v, "right SELECT")); + savedLimit = p->iLimit; + savedOffset = p->iOffset; + p->iLimit = regLimitB; + p->iOffset = 0; + ExplainQueryPlan((pParse, 1, "RIGHT")); + sqlite3Select(pParse, p, &destB); + p->iLimit = savedLimit; + p->iOffset = savedOffset; + sqlite3VdbeEndCoroutine(v, regAddrB); + + /* Generate a subroutine that outputs the current row of the A + ** select as the next output row of the compound select. + */ + VdbeNoopComment((v, "Output routine for A")); + addrOutA = generateOutputSubroutine(pParse, + p, &destA, pDest, regOutA, + regPrev, pKeyDup, labelEnd); + + /* Generate a subroutine that outputs the current row of the B + ** select as the next output row of the compound select. + */ + if( op==TK_ALL || op==TK_UNION ){ + VdbeNoopComment((v, "Output routine for B")); + addrOutB = generateOutputSubroutine(pParse, + p, &destB, pDest, regOutB, + regPrev, pKeyDup, labelEnd); + } + sqlite3KeyInfoUnref(pKeyDup); + + /* Generate a subroutine to run when the results from select A + ** are exhausted and only data in select B remains. + */ + if( op==TK_EXCEPT || op==TK_INTERSECT ){ + addrEofA_noB = addrEofA = labelEnd; + }else{ + VdbeNoopComment((v, "eof-A subroutine")); + addrEofA = sqlite3VdbeAddOp2(v, OP_Gosub, regOutB, addrOutB); + addrEofA_noB = sqlite3VdbeAddOp2(v, OP_Yield, regAddrB, labelEnd); + VdbeCoverage(v); + sqlite3VdbeGoto(v, addrEofA); + p->nSelectRow = sqlite3LogEstAdd(p->nSelectRow, pPrior->nSelectRow); + } + + /* Generate a subroutine to run when the results from select B + ** are exhausted and only data in select A remains. + */ + if( op==TK_INTERSECT ){ + addrEofB = addrEofA; + if( p->nSelectRow > pPrior->nSelectRow ) p->nSelectRow = pPrior->nSelectRow; + }else{ + VdbeNoopComment((v, "eof-B subroutine")); + addrEofB = sqlite3VdbeAddOp2(v, OP_Gosub, regOutA, addrOutA); + sqlite3VdbeAddOp2(v, OP_Yield, regAddrA, labelEnd); VdbeCoverage(v); + sqlite3VdbeGoto(v, addrEofB); + } + + /* Generate code to handle the case of AB + */ + VdbeNoopComment((v, "A-gt-B subroutine")); + addrAgtB = sqlite3VdbeCurrentAddr(v); + if( op==TK_ALL || op==TK_UNION ){ + sqlite3VdbeAddOp2(v, OP_Gosub, regOutB, addrOutB); + } + sqlite3VdbeAddOp2(v, OP_Yield, regAddrB, addrEofB); VdbeCoverage(v); + sqlite3VdbeGoto(v, labelCmpr); + + /* This code runs once to initialize everything. + */ + sqlite3VdbeJumpHere(v, addr1); + sqlite3VdbeAddOp2(v, OP_Yield, regAddrA, addrEofA_noB); VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_Yield, regAddrB, addrEofB); VdbeCoverage(v); + + /* Implement the main merge loop + */ + sqlite3VdbeResolveLabel(v, labelCmpr); + sqlite3VdbeAddOp4(v, OP_Permutation, 0, 0, 0, (char*)aPermute, P4_INTARRAY); + sqlite3VdbeAddOp4(v, OP_Compare, destA.iSdst, destB.iSdst, nOrderBy, + (char*)pKeyMerge, P4_KEYINFO); + sqlite3VdbeChangeP5(v, OPFLAG_PERMUTE); + sqlite3VdbeAddOp3(v, OP_Jump, addrAltB, addrAeqB, addrAgtB); VdbeCoverage(v); + + /* Jump to the this point in order to terminate the query. + */ + sqlite3VdbeResolveLabel(v, labelEnd); + + /* Reassembly the compound query so that it will be freed correctly + ** by the calling function */ + if( p->pPrior ){ + sqlite3SelectDelete(db, p->pPrior); + } + p->pPrior = pPrior; + pPrior->pNext = p; + + /*** TBD: Insert subroutine calls to close cursors on incomplete + **** subqueries ****/ + ExplainQueryPlanPop(pParse); + return pParse->nErr!=0; +} +#endif + +#if !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW) + +/* An instance of the SubstContext object describes an substitution edit +** to be performed on a parse tree. +** +** All references to columns in table iTable are to be replaced by corresponding +** expressions in pEList. +*/ +typedef struct SubstContext { + Parse *pParse; /* The parsing context */ + int iTable; /* Replace references to this table */ + int iNewTable; /* New table number */ + int isLeftJoin; /* Add TK_IF_NULL_ROW opcodes on each replacement */ + ExprList *pEList; /* Replacement expressions */ +} SubstContext; + +/* Forward Declarations */ +static void substExprList(SubstContext*, ExprList*); +static void substSelect(SubstContext*, Select*, int); + +/* +** Scan through the expression pExpr. Replace every reference to +** a column in table number iTable with a copy of the iColumn-th +** entry in pEList. (But leave references to the ROWID column +** unchanged.) +** +** This routine is part of the flattening procedure. A subquery +** whose result set is defined by pEList appears as entry in the +** FROM clause of a SELECT such that the VDBE cursor assigned to that +** FORM clause entry is iTable. This routine makes the necessary +** changes to pExpr so that it refers directly to the source table +** of the subquery rather the result set of the subquery. +*/ +static Expr *substExpr( + SubstContext *pSubst, /* Description of the substitution */ + Expr *pExpr /* Expr in which substitution occurs */ +){ + if( pExpr==0 ) return 0; + if( ExprHasProperty(pExpr, EP_FromJoin) + && pExpr->iRightJoinTable==pSubst->iTable + ){ + pExpr->iRightJoinTable = pSubst->iNewTable; + } + if( pExpr->op==TK_COLUMN + && pExpr->iTable==pSubst->iTable + && !ExprHasProperty(pExpr, EP_FixedCol) + ){ + if( pExpr->iColumn<0 ){ + pExpr->op = TK_NULL; + }else{ + Expr *pNew; + Expr *pCopy = pSubst->pEList->a[pExpr->iColumn].pExpr; + Expr ifNullRow; + assert( pSubst->pEList!=0 && pExpr->iColumnpEList->nExpr ); + assert( pExpr->pRight==0 ); + if( sqlite3ExprIsVector(pCopy) ){ + sqlite3VectorErrorMsg(pSubst->pParse, pCopy); + }else{ + sqlite3 *db = pSubst->pParse->db; + if( pSubst->isLeftJoin && pCopy->op!=TK_COLUMN ){ + memset(&ifNullRow, 0, sizeof(ifNullRow)); + ifNullRow.op = TK_IF_NULL_ROW; + ifNullRow.pLeft = pCopy; + ifNullRow.iTable = pSubst->iNewTable; + ifNullRow.flags = EP_Skip; + pCopy = &ifNullRow; + } + testcase( ExprHasProperty(pCopy, EP_Subquery) ); + pNew = sqlite3ExprDup(db, pCopy, 0); + if( pNew && pSubst->isLeftJoin ){ + ExprSetProperty(pNew, EP_CanBeNull); + } + if( pNew && ExprHasProperty(pExpr,EP_FromJoin) ){ + pNew->iRightJoinTable = pExpr->iRightJoinTable; + ExprSetProperty(pNew, EP_FromJoin); + } + sqlite3ExprDelete(db, pExpr); + pExpr = pNew; + + /* Ensure that the expression now has an implicit collation sequence, + ** just as it did when it was a column of a view or sub-query. */ + if( pExpr ){ + if( pExpr->op!=TK_COLUMN && pExpr->op!=TK_COLLATE ){ + CollSeq *pColl = sqlite3ExprCollSeq(pSubst->pParse, pExpr); + pExpr = sqlite3ExprAddCollateString(pSubst->pParse, pExpr, + (pColl ? pColl->zName : "BINARY") + ); + } + ExprClearProperty(pExpr, EP_Collate); + } + } + } + }else{ + if( pExpr->op==TK_IF_NULL_ROW && pExpr->iTable==pSubst->iTable ){ + pExpr->iTable = pSubst->iNewTable; + } + pExpr->pLeft = substExpr(pSubst, pExpr->pLeft); + pExpr->pRight = substExpr(pSubst, pExpr->pRight); + if( ExprHasProperty(pExpr, EP_xIsSelect) ){ + substSelect(pSubst, pExpr->x.pSelect, 1); + }else{ + substExprList(pSubst, pExpr->x.pList); + } +#ifndef SQLITE_OMIT_WINDOWFUNC + if( ExprHasProperty(pExpr, EP_WinFunc) ){ + Window *pWin = pExpr->y.pWin; + pWin->pFilter = substExpr(pSubst, pWin->pFilter); + substExprList(pSubst, pWin->pPartition); + substExprList(pSubst, pWin->pOrderBy); + } +#endif + } + return pExpr; +} +static void substExprList( + SubstContext *pSubst, /* Description of the substitution */ + ExprList *pList /* List to scan and in which to make substitutes */ +){ + int i; + if( pList==0 ) return; + for(i=0; inExpr; i++){ + pList->a[i].pExpr = substExpr(pSubst, pList->a[i].pExpr); + } +} +static void substSelect( + SubstContext *pSubst, /* Description of the substitution */ + Select *p, /* SELECT statement in which to make substitutions */ + int doPrior /* Do substitutes on p->pPrior too */ +){ + SrcList *pSrc; + struct SrcList_item *pItem; + int i; + if( !p ) return; + do{ + substExprList(pSubst, p->pEList); + substExprList(pSubst, p->pGroupBy); + substExprList(pSubst, p->pOrderBy); + p->pHaving = substExpr(pSubst, p->pHaving); + p->pWhere = substExpr(pSubst, p->pWhere); + pSrc = p->pSrc; + assert( pSrc!=0 ); + for(i=pSrc->nSrc, pItem=pSrc->a; i>0; i--, pItem++){ + substSelect(pSubst, pItem->pSelect, 1); + if( pItem->fg.isTabFunc ){ + substExprList(pSubst, pItem->u1.pFuncArg); + } + } + }while( doPrior && (p = p->pPrior)!=0 ); +} +#endif /* !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW) */ + +#if !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW) +/* +** pSelect is a SELECT statement and pSrcItem is one item in the FROM +** clause of that SELECT. +** +** This routine scans the entire SELECT statement and recomputes the +** pSrcItem->colUsed mask. +*/ +static int recomputeColumnsUsedExpr(Walker *pWalker, Expr *pExpr){ + struct SrcList_item *pItem; + if( pExpr->op!=TK_COLUMN ) return WRC_Continue; + pItem = pWalker->u.pSrcItem; + if( pItem->iCursor!=pExpr->iTable ) return WRC_Continue; + if( pExpr->iColumn<0 ) return WRC_Continue; + pItem->colUsed |= sqlite3ExprColUsed(pExpr); + return WRC_Continue; +} +static void recomputeColumnsUsed( + Select *pSelect, /* The complete SELECT statement */ + struct SrcList_item *pSrcItem /* Which FROM clause item to recompute */ +){ + Walker w; + if( NEVER(pSrcItem->pTab==0) ) return; + memset(&w, 0, sizeof(w)); + w.xExprCallback = recomputeColumnsUsedExpr; + w.xSelectCallback = sqlite3SelectWalkNoop; + w.u.pSrcItem = pSrcItem; + pSrcItem->colUsed = 0; + sqlite3WalkSelect(&w, pSelect); +} +#endif /* !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW) */ + +#if !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW) +/* +** This routine attempts to flatten subqueries as a performance optimization. +** This routine returns 1 if it makes changes and 0 if no flattening occurs. +** +** To understand the concept of flattening, consider the following +** query: +** +** SELECT a FROM (SELECT x+y AS a FROM t1 WHERE z<100) WHERE a>5 +** +** The default way of implementing this query is to execute the +** subquery first and store the results in a temporary table, then +** run the outer query on that temporary table. This requires two +** passes over the data. Furthermore, because the temporary table +** has no indices, the WHERE clause on the outer query cannot be +** optimized. +** +** This routine attempts to rewrite queries such as the above into +** a single flat select, like this: +** +** SELECT x+y AS a FROM t1 WHERE z<100 AND a>5 +** +** The code generated for this simplification gives the same result +** but only has to scan the data once. And because indices might +** exist on the table t1, a complete scan of the data might be +** avoided. +** +** Flattening is subject to the following constraints: +** +** (**) We no longer attempt to flatten aggregate subqueries. Was: +** The subquery and the outer query cannot both be aggregates. +** +** (**) We no longer attempt to flatten aggregate subqueries. Was: +** (2) If the subquery is an aggregate then +** (2a) the outer query must not be a join and +** (2b) the outer query must not use subqueries +** other than the one FROM-clause subquery that is a candidate +** for flattening. (This is due to ticket [2f7170d73bf9abf80] +** from 2015-02-09.) +** +** (3) If the subquery is the right operand of a LEFT JOIN then +** (3a) the subquery may not be a join and +** (3b) the FROM clause of the subquery may not contain a virtual +** table and +** (3c) the outer query may not be an aggregate. +** (3d) the outer query may not be DISTINCT. +** +** (4) The subquery can not be DISTINCT. +** +** (**) At one point restrictions (4) and (5) defined a subset of DISTINCT +** sub-queries that were excluded from this optimization. Restriction +** (4) has since been expanded to exclude all DISTINCT subqueries. +** +** (**) We no longer attempt to flatten aggregate subqueries. Was: +** If the subquery is aggregate, the outer query may not be DISTINCT. +** +** (7) The subquery must have a FROM clause. TODO: For subqueries without +** A FROM clause, consider adding a FROM clause with the special +** table sqlite_once that consists of a single row containing a +** single NULL. +** +** (8) If the subquery uses LIMIT then the outer query may not be a join. +** +** (9) If the subquery uses LIMIT then the outer query may not be aggregate. +** +** (**) Restriction (10) was removed from the code on 2005-02-05 but we +** accidently carried the comment forward until 2014-09-15. Original +** constraint: "If the subquery is aggregate then the outer query +** may not use LIMIT." +** +** (11) The subquery and the outer query may not both have ORDER BY clauses. +** +** (**) Not implemented. Subsumed into restriction (3). Was previously +** a separate restriction deriving from ticket #350. +** +** (13) The subquery and outer query may not both use LIMIT. +** +** (14) The subquery may not use OFFSET. +** +** (15) If the outer query is part of a compound select, then the +** subquery may not use LIMIT. +** (See ticket #2339 and ticket [02a8e81d44]). +** +** (16) If the outer query is aggregate, then the subquery may not +** use ORDER BY. (Ticket #2942) This used to not matter +** until we introduced the group_concat() function. +** +** (17) If the subquery is a compound select, then +** (17a) all compound operators must be a UNION ALL, and +** (17b) no terms within the subquery compound may be aggregate +** or DISTINCT, and +** (17c) every term within the subquery compound must have a FROM clause +** (17d) the outer query may not be +** (17d1) aggregate, or +** (17d2) DISTINCT, or +** (17d3) a join. +** (17e) the subquery may not contain window functions +** +** The parent and sub-query may contain WHERE clauses. Subject to +** rules (11), (13) and (14), they may also contain ORDER BY, +** LIMIT and OFFSET clauses. The subquery cannot use any compound +** operator other than UNION ALL because all the other compound +** operators have an implied DISTINCT which is disallowed by +** restriction (4). +** +** Also, each component of the sub-query must return the same number +** of result columns. This is actually a requirement for any compound +** SELECT statement, but all the code here does is make sure that no +** such (illegal) sub-query is flattened. The caller will detect the +** syntax error and return a detailed message. +** +** (18) If the sub-query is a compound select, then all terms of the +** ORDER BY clause of the parent must be simple references to +** columns of the sub-query. +** +** (19) If the subquery uses LIMIT then the outer query may not +** have a WHERE clause. +** +** (20) If the sub-query is a compound select, then it must not use +** an ORDER BY clause. Ticket #3773. We could relax this constraint +** somewhat by saying that the terms of the ORDER BY clause must +** appear as unmodified result columns in the outer query. But we +** have other optimizations in mind to deal with that case. +** +** (21) If the subquery uses LIMIT then the outer query may not be +** DISTINCT. (See ticket [752e1646fc]). +** +** (22) The subquery may not be a recursive CTE. +** +** (**) Subsumed into restriction (17d3). Was: If the outer query is +** a recursive CTE, then the sub-query may not be a compound query. +** This restriction is because transforming the +** parent to a compound query confuses the code that handles +** recursive queries in multiSelect(). +** +** (**) We no longer attempt to flatten aggregate subqueries. Was: +** The subquery may not be an aggregate that uses the built-in min() or +** or max() functions. (Without this restriction, a query like: +** "SELECT x FROM (SELECT max(y), x FROM t1)" would not necessarily +** return the value X for which Y was maximal.) +** +** (25) If either the subquery or the parent query contains a window +** function in the select list or ORDER BY clause, flattening +** is not attempted. +** +** +** In this routine, the "p" parameter is a pointer to the outer query. +** The subquery is p->pSrc->a[iFrom]. isAgg is true if the outer query +** uses aggregates. +** +** If flattening is not attempted, this routine is a no-op and returns 0. +** If flattening is attempted this routine returns 1. +** +** All of the expression analysis must occur on both the outer query and +** the subquery before this routine runs. +*/ +static int flattenSubquery( + Parse *pParse, /* Parsing context */ + Select *p, /* The parent or outer SELECT statement */ + int iFrom, /* Index in p->pSrc->a[] of the inner subquery */ + int isAgg /* True if outer SELECT uses aggregate functions */ +){ + const char *zSavedAuthContext = pParse->zAuthContext; + Select *pParent; /* Current UNION ALL term of the other query */ + Select *pSub; /* The inner query or "subquery" */ + Select *pSub1; /* Pointer to the rightmost select in sub-query */ + SrcList *pSrc; /* The FROM clause of the outer query */ + SrcList *pSubSrc; /* The FROM clause of the subquery */ + int iParent; /* VDBE cursor number of the pSub result set temp table */ + int iNewParent = -1;/* Replacement table for iParent */ + int isLeftJoin = 0; /* True if pSub is the right side of a LEFT JOIN */ + int i; /* Loop counter */ + Expr *pWhere; /* The WHERE clause */ + struct SrcList_item *pSubitem; /* The subquery */ + sqlite3 *db = pParse->db; + + /* Check to see if flattening is permitted. Return 0 if not. + */ + assert( p!=0 ); + assert( p->pPrior==0 ); + if( OptimizationDisabled(db, SQLITE_QueryFlattener) ) return 0; + pSrc = p->pSrc; + assert( pSrc && iFrom>=0 && iFromnSrc ); + pSubitem = &pSrc->a[iFrom]; + iParent = pSubitem->iCursor; + pSub = pSubitem->pSelect; + assert( pSub!=0 ); + +#ifndef SQLITE_OMIT_WINDOWFUNC + if( p->pWin || pSub->pWin ) return 0; /* Restriction (25) */ +#endif + + pSubSrc = pSub->pSrc; + assert( pSubSrc ); + /* Prior to version 3.1.2, when LIMIT and OFFSET had to be simple constants, + ** not arbitrary expressions, we allowed some combining of LIMIT and OFFSET + ** because they could be computed at compile-time. But when LIMIT and OFFSET + ** became arbitrary expressions, we were forced to add restrictions (13) + ** and (14). */ + if( pSub->pLimit && p->pLimit ) return 0; /* Restriction (13) */ + if( pSub->pLimit && pSub->pLimit->pRight ) return 0; /* Restriction (14) */ + if( (p->selFlags & SF_Compound)!=0 && pSub->pLimit ){ + return 0; /* Restriction (15) */ + } + if( pSubSrc->nSrc==0 ) return 0; /* Restriction (7) */ + if( pSub->selFlags & SF_Distinct ) return 0; /* Restriction (4) */ + if( pSub->pLimit && (pSrc->nSrc>1 || isAgg) ){ + return 0; /* Restrictions (8)(9) */ + } + if( p->pOrderBy && pSub->pOrderBy ){ + return 0; /* Restriction (11) */ + } + if( isAgg && pSub->pOrderBy ) return 0; /* Restriction (16) */ + if( pSub->pLimit && p->pWhere ) return 0; /* Restriction (19) */ + if( pSub->pLimit && (p->selFlags & SF_Distinct)!=0 ){ + return 0; /* Restriction (21) */ + } + if( pSub->selFlags & (SF_Recursive) ){ + return 0; /* Restrictions (22) */ + } + + /* + ** If the subquery is the right operand of a LEFT JOIN, then the + ** subquery may not be a join itself (3a). Example of why this is not + ** allowed: + ** + ** t1 LEFT OUTER JOIN (t2 JOIN t3) + ** + ** If we flatten the above, we would get + ** + ** (t1 LEFT OUTER JOIN t2) JOIN t3 + ** + ** which is not at all the same thing. + ** + ** If the subquery is the right operand of a LEFT JOIN, then the outer + ** query cannot be an aggregate. (3c) This is an artifact of the way + ** aggregates are processed - there is no mechanism to determine if + ** the LEFT JOIN table should be all-NULL. + ** + ** See also tickets #306, #350, and #3300. + */ + if( (pSubitem->fg.jointype & JT_OUTER)!=0 ){ + isLeftJoin = 1; + if( pSubSrc->nSrc>1 /* (3a) */ + || isAgg /* (3b) */ + || IsVirtual(pSubSrc->a[0].pTab) /* (3c) */ + || (p->selFlags & SF_Distinct)!=0 /* (3d) */ + ){ + return 0; + } + } +#ifdef SQLITE_EXTRA_IFNULLROW + else if( iFrom>0 && !isAgg ){ + /* Setting isLeftJoin to -1 causes OP_IfNullRow opcodes to be generated for + ** every reference to any result column from subquery in a join, even + ** though they are not necessary. This will stress-test the OP_IfNullRow + ** opcode. */ + isLeftJoin = -1; + } +#endif + + /* Restriction (17): If the sub-query is a compound SELECT, then it must + ** use only the UNION ALL operator. And none of the simple select queries + ** that make up the compound SELECT are allowed to be aggregate or distinct + ** queries. + */ + if( pSub->pPrior ){ + if( pSub->pOrderBy ){ + return 0; /* Restriction (20) */ + } + if( isAgg || (p->selFlags & SF_Distinct)!=0 || pSrc->nSrc!=1 ){ + return 0; /* (17d1), (17d2), or (17d3) */ + } + for(pSub1=pSub; pSub1; pSub1=pSub1->pPrior){ + testcase( (pSub1->selFlags & (SF_Distinct|SF_Aggregate))==SF_Distinct ); + testcase( (pSub1->selFlags & (SF_Distinct|SF_Aggregate))==SF_Aggregate ); + assert( pSub->pSrc!=0 ); + assert( pSub->pEList->nExpr==pSub1->pEList->nExpr ); + if( (pSub1->selFlags & (SF_Distinct|SF_Aggregate))!=0 /* (17b) */ + || (pSub1->pPrior && pSub1->op!=TK_ALL) /* (17a) */ + || pSub1->pSrc->nSrc<1 /* (17c) */ +#ifndef SQLITE_OMIT_WINDOWFUNC + || pSub1->pWin /* (17e) */ +#endif + ){ + return 0; + } + testcase( pSub1->pSrc->nSrc>1 ); + } + + /* Restriction (18). */ + if( p->pOrderBy ){ + int ii; + for(ii=0; iipOrderBy->nExpr; ii++){ + if( p->pOrderBy->a[ii].u.x.iOrderByCol==0 ) return 0; + } + } + } + + /* Ex-restriction (23): + ** The only way that the recursive part of a CTE can contain a compound + ** subquery is for the subquery to be one term of a join. But if the + ** subquery is a join, then the flattening has already been stopped by + ** restriction (17d3) + */ + assert( (p->selFlags & SF_Recursive)==0 || pSub->pPrior==0 ); + + /***** If we reach this point, flattening is permitted. *****/ + SELECTTRACE(1,pParse,p,("flatten %u.%p from term %d\n", + pSub->selId, pSub, iFrom)); + + /* Authorize the subquery */ + pParse->zAuthContext = pSubitem->zName; + TESTONLY(i =) sqlite3AuthCheck(pParse, SQLITE_SELECT, 0, 0, 0); + testcase( i==SQLITE_DENY ); + pParse->zAuthContext = zSavedAuthContext; + + /* If the sub-query is a compound SELECT statement, then (by restrictions + ** 17 and 18 above) it must be a UNION ALL and the parent query must + ** be of the form: + ** + ** SELECT FROM () + ** + ** followed by any ORDER BY, LIMIT and/or OFFSET clauses. This block + ** creates N-1 copies of the parent query without any ORDER BY, LIMIT or + ** OFFSET clauses and joins them to the left-hand-side of the original + ** using UNION ALL operators. In this case N is the number of simple + ** select statements in the compound sub-query. + ** + ** Example: + ** + ** SELECT a+1 FROM ( + ** SELECT x FROM tab + ** UNION ALL + ** SELECT y FROM tab + ** UNION ALL + ** SELECT abs(z*2) FROM tab2 + ** ) WHERE a!=5 ORDER BY 1 + ** + ** Transformed into: + ** + ** SELECT x+1 FROM tab WHERE x+1!=5 + ** UNION ALL + ** SELECT y+1 FROM tab WHERE y+1!=5 + ** UNION ALL + ** SELECT abs(z*2)+1 FROM tab2 WHERE abs(z*2)+1!=5 + ** ORDER BY 1 + ** + ** We call this the "compound-subquery flattening". + */ + for(pSub=pSub->pPrior; pSub; pSub=pSub->pPrior){ + Select *pNew; + ExprList *pOrderBy = p->pOrderBy; + Expr *pLimit = p->pLimit; + Select *pPrior = p->pPrior; + p->pOrderBy = 0; + p->pSrc = 0; + p->pPrior = 0; + p->pLimit = 0; + pNew = sqlite3SelectDup(db, p, 0); + p->pLimit = pLimit; + p->pOrderBy = pOrderBy; + p->pSrc = pSrc; + p->op = TK_ALL; + if( pNew==0 ){ + p->pPrior = pPrior; + }else{ + pNew->pPrior = pPrior; + if( pPrior ) pPrior->pNext = pNew; + pNew->pNext = p; + p->pPrior = pNew; + SELECTTRACE(2,pParse,p,("compound-subquery flattener" + " creates %u as peer\n",pNew->selId)); + } + if( db->mallocFailed ) return 1; + } + + /* Begin flattening the iFrom-th entry of the FROM clause + ** in the outer query. + */ + pSub = pSub1 = pSubitem->pSelect; + + /* Delete the transient table structure associated with the + ** subquery + */ + sqlite3DbFree(db, pSubitem->zDatabase); + sqlite3DbFree(db, pSubitem->zName); + sqlite3DbFree(db, pSubitem->zAlias); + pSubitem->zDatabase = 0; + pSubitem->zName = 0; + pSubitem->zAlias = 0; + pSubitem->pSelect = 0; + + /* Defer deleting the Table object associated with the + ** subquery until code generation is + ** complete, since there may still exist Expr.pTab entries that + ** refer to the subquery even after flattening. Ticket #3346. + ** + ** pSubitem->pTab is always non-NULL by test restrictions and tests above. + */ + if( ALWAYS(pSubitem->pTab!=0) ){ + Table *pTabToDel = pSubitem->pTab; + if( pTabToDel->nTabRef==1 ){ + Parse *pToplevel = sqlite3ParseToplevel(pParse); + pTabToDel->pNextZombie = pToplevel->pZombieTab; + pToplevel->pZombieTab = pTabToDel; + }else{ + pTabToDel->nTabRef--; + } + pSubitem->pTab = 0; + } + + /* The following loop runs once for each term in a compound-subquery + ** flattening (as described above). If we are doing a different kind + ** of flattening - a flattening other than a compound-subquery flattening - + ** then this loop only runs once. + ** + ** This loop moves all of the FROM elements of the subquery into the + ** the FROM clause of the outer query. Before doing this, remember + ** the cursor number for the original outer query FROM element in + ** iParent. The iParent cursor will never be used. Subsequent code + ** will scan expressions looking for iParent references and replace + ** those references with expressions that resolve to the subquery FROM + ** elements we are now copying in. + */ + for(pParent=p; pParent; pParent=pParent->pPrior, pSub=pSub->pPrior){ + int nSubSrc; + u8 jointype = 0; + assert( pSub!=0 ); + pSubSrc = pSub->pSrc; /* FROM clause of subquery */ + nSubSrc = pSubSrc->nSrc; /* Number of terms in subquery FROM clause */ + pSrc = pParent->pSrc; /* FROM clause of the outer query */ + + if( pSrc ){ + assert( pParent==p ); /* First time through the loop */ + jointype = pSubitem->fg.jointype; + }else{ + assert( pParent!=p ); /* 2nd and subsequent times through the loop */ + pSrc = sqlite3SrcListAppend(pParse, 0, 0, 0); + if( pSrc==0 ) break; + pParent->pSrc = pSrc; + } + + /* The subquery uses a single slot of the FROM clause of the outer + ** query. If the subquery has more than one element in its FROM clause, + ** then expand the outer query to make space for it to hold all elements + ** of the subquery. + ** + ** Example: + ** + ** SELECT * FROM tabA, (SELECT * FROM sub1, sub2), tabB; + ** + ** The outer query has 3 slots in its FROM clause. One slot of the + ** outer query (the middle slot) is used by the subquery. The next + ** block of code will expand the outer query FROM clause to 4 slots. + ** The middle slot is expanded to two slots in order to make space + ** for the two elements in the FROM clause of the subquery. + */ + if( nSubSrc>1 ){ + pSrc = sqlite3SrcListEnlarge(pParse, pSrc, nSubSrc-1,iFrom+1); + if( pSrc==0 ) break; + pParent->pSrc = pSrc; + } + + /* Transfer the FROM clause terms from the subquery into the + ** outer query. + */ + for(i=0; ia[i+iFrom].pUsing); + assert( pSrc->a[i+iFrom].fg.isTabFunc==0 ); + pSrc->a[i+iFrom] = pSubSrc->a[i]; + iNewParent = pSubSrc->a[i].iCursor; + memset(&pSubSrc->a[i], 0, sizeof(pSubSrc->a[i])); + } + pSrc->a[iFrom].fg.jointype = jointype; + + /* Now begin substituting subquery result set expressions for + ** references to the iParent in the outer query. + ** + ** Example: + ** + ** SELECT a+5, b*10 FROM (SELECT x*3 AS a, y+10 AS b FROM t1) WHERE a>b; + ** \ \_____________ subquery __________/ / + ** \_____________________ outer query ______________________________/ + ** + ** We look at every expression in the outer query and every place we see + ** "a" we substitute "x*3" and every place we see "b" we substitute "y+10". + */ + if( pSub->pOrderBy ){ + /* At this point, any non-zero iOrderByCol values indicate that the + ** ORDER BY column expression is identical to the iOrderByCol'th + ** expression returned by SELECT statement pSub. Since these values + ** do not necessarily correspond to columns in SELECT statement pParent, + ** zero them before transfering the ORDER BY clause. + ** + ** Not doing this may cause an error if a subsequent call to this + ** function attempts to flatten a compound sub-query into pParent + ** (the only way this can happen is if the compound sub-query is + ** currently part of pSub->pSrc). See ticket [d11a6e908f]. */ + ExprList *pOrderBy = pSub->pOrderBy; + for(i=0; inExpr; i++){ + pOrderBy->a[i].u.x.iOrderByCol = 0; + } + assert( pParent->pOrderBy==0 ); + pParent->pOrderBy = pOrderBy; + pSub->pOrderBy = 0; + } + pWhere = pSub->pWhere; + pSub->pWhere = 0; + if( isLeftJoin>0 ){ + sqlite3SetJoinExpr(pWhere, iNewParent); + } + pParent->pWhere = sqlite3ExprAnd(pParse, pWhere, pParent->pWhere); + if( db->mallocFailed==0 ){ + SubstContext x; + x.pParse = pParse; + x.iTable = iParent; + x.iNewTable = iNewParent; + x.isLeftJoin = isLeftJoin; + x.pEList = pSub->pEList; + substSelect(&x, pParent, 0); + } + + /* The flattened query is a compound if either the inner or the + ** outer query is a compound. */ + pParent->selFlags |= pSub->selFlags & SF_Compound; + assert( (pSub->selFlags & SF_Distinct)==0 ); /* restriction (17b) */ + + /* + ** SELECT ... FROM (SELECT ... LIMIT a OFFSET b) LIMIT x OFFSET y; + ** + ** One is tempted to try to add a and b to combine the limits. But this + ** does not work if either limit is negative. + */ + if( pSub->pLimit ){ + pParent->pLimit = pSub->pLimit; + pSub->pLimit = 0; + } + + /* Recompute the SrcList_item.colUsed masks for the flattened + ** tables. */ + for(i=0; ia[i+iFrom]); + } + } + + /* Finially, delete what is left of the subquery and return + ** success. + */ + sqlite3SelectDelete(db, pSub1); + +#if SELECTTRACE_ENABLED + if( sqlite3SelectTrace & 0x100 ){ + SELECTTRACE(0x100,pParse,p,("After flattening:\n")); + sqlite3TreeViewSelect(0, p, 0); + } +#endif + + return 1; +} +#endif /* !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW) */ + +/* +** A structure to keep track of all of the column values that are fixed to +** a known value due to WHERE clause constraints of the form COLUMN=VALUE. +*/ +typedef struct WhereConst WhereConst; +struct WhereConst { + Parse *pParse; /* Parsing context */ + int nConst; /* Number for COLUMN=CONSTANT terms */ + int nChng; /* Number of times a constant is propagated */ + Expr **apExpr; /* [i*2] is COLUMN and [i*2+1] is VALUE */ +}; + +/* +** Add a new entry to the pConst object. Except, do not add duplicate +** pColumn entires. Also, do not add if doing so would not be appropriate. +** +** The caller guarantees the pColumn is a column and pValue is a constant. +** This routine has to do some additional checks before completing the +** insert. +*/ +static void constInsert( + WhereConst *pConst, /* The WhereConst into which we are inserting */ + Expr *pColumn, /* The COLUMN part of the constraint */ + Expr *pValue, /* The VALUE part of the constraint */ + Expr *pExpr /* Overall expression: COLUMN=VALUE or VALUE=COLUMN */ +){ + int i; + assert( pColumn->op==TK_COLUMN ); + assert( sqlite3ExprIsConstant(pValue) ); + + if( ExprHasProperty(pColumn, EP_FixedCol) ) return; + if( sqlite3ExprAffinity(pValue)!=0 ) return; + if( !sqlite3IsBinary(sqlite3ExprCompareCollSeq(pConst->pParse,pExpr)) ){ + return; + } + + /* 2018-10-25 ticket [cf5ed20f] + ** Make sure the same pColumn is not inserted more than once */ + for(i=0; inConst; i++){ + const Expr *pE2 = pConst->apExpr[i*2]; + assert( pE2->op==TK_COLUMN ); + if( pE2->iTable==pColumn->iTable + && pE2->iColumn==pColumn->iColumn + ){ + return; /* Already present. Return without doing anything. */ + } + } + + pConst->nConst++; + pConst->apExpr = sqlite3DbReallocOrFree(pConst->pParse->db, pConst->apExpr, + pConst->nConst*2*sizeof(Expr*)); + if( pConst->apExpr==0 ){ + pConst->nConst = 0; + }else{ + pConst->apExpr[pConst->nConst*2-2] = pColumn; + pConst->apExpr[pConst->nConst*2-1] = pValue; + } +} + +/* +** Find all terms of COLUMN=VALUE or VALUE=COLUMN in pExpr where VALUE +** is a constant expression and where the term must be true because it +** is part of the AND-connected terms of the expression. For each term +** found, add it to the pConst structure. +*/ +static void findConstInWhere(WhereConst *pConst, Expr *pExpr){ + Expr *pRight, *pLeft; + if( pExpr==0 ) return; + if( ExprHasProperty(pExpr, EP_FromJoin) ) return; + if( pExpr->op==TK_AND ){ + findConstInWhere(pConst, pExpr->pRight); + findConstInWhere(pConst, pExpr->pLeft); + return; + } + if( pExpr->op!=TK_EQ ) return; + pRight = pExpr->pRight; + pLeft = pExpr->pLeft; + assert( pRight!=0 ); + assert( pLeft!=0 ); + if( pRight->op==TK_COLUMN && sqlite3ExprIsConstant(pLeft) ){ + constInsert(pConst,pRight,pLeft,pExpr); + } + if( pLeft->op==TK_COLUMN && sqlite3ExprIsConstant(pRight) ){ + constInsert(pConst,pLeft,pRight,pExpr); + } +} + +/* +** This is a Walker expression callback. pExpr is a candidate expression +** to be replaced by a value. If pExpr is equivalent to one of the +** columns named in pWalker->u.pConst, then overwrite it with its +** corresponding value. +*/ +static int propagateConstantExprRewrite(Walker *pWalker, Expr *pExpr){ + int i; + WhereConst *pConst; + if( pExpr->op!=TK_COLUMN ) return WRC_Continue; + if( ExprHasProperty(pExpr, EP_FixedCol|EP_FromJoin) ){ + testcase( ExprHasProperty(pExpr, EP_FixedCol) ); + testcase( ExprHasProperty(pExpr, EP_FromJoin) ); + return WRC_Continue; + } + pConst = pWalker->u.pConst; + for(i=0; inConst; i++){ + Expr *pColumn = pConst->apExpr[i*2]; + if( pColumn==pExpr ) continue; + if( pColumn->iTable!=pExpr->iTable ) continue; + if( pColumn->iColumn!=pExpr->iColumn ) continue; + /* A match is found. Add the EP_FixedCol property */ + pConst->nChng++; + ExprClearProperty(pExpr, EP_Leaf); + ExprSetProperty(pExpr, EP_FixedCol); + assert( pExpr->pLeft==0 ); + pExpr->pLeft = sqlite3ExprDup(pConst->pParse->db, pConst->apExpr[i*2+1], 0); + break; + } + return WRC_Prune; +} + +/* +** The WHERE-clause constant propagation optimization. +** +** If the WHERE clause contains terms of the form COLUMN=CONSTANT or +** CONSTANT=COLUMN that are top-level AND-connected terms that are not +** part of a ON clause from a LEFT JOIN, then throughout the query +** replace all other occurrences of COLUMN with CONSTANT. +** +** For example, the query: +** +** SELECT * FROM t1, t2, t3 WHERE t1.a=39 AND t2.b=t1.a AND t3.c=t2.b +** +** Is transformed into +** +** SELECT * FROM t1, t2, t3 WHERE t1.a=39 AND t2.b=39 AND t3.c=39 +** +** Return true if any transformations where made and false if not. +** +** Implementation note: Constant propagation is tricky due to affinity +** and collating sequence interactions. Consider this example: +** +** CREATE TABLE t1(a INT,b TEXT); +** INSERT INTO t1 VALUES(123,'0123'); +** SELECT * FROM t1 WHERE a=123 AND b=a; +** SELECT * FROM t1 WHERE a=123 AND b=123; +** +** The two SELECT statements above should return different answers. b=a +** is alway true because the comparison uses numeric affinity, but b=123 +** is false because it uses text affinity and '0123' is not the same as '123'. +** To work around this, the expression tree is not actually changed from +** "b=a" to "b=123" but rather the "a" in "b=a" is tagged with EP_FixedCol +** and the "123" value is hung off of the pLeft pointer. Code generator +** routines know to generate the constant "123" instead of looking up the +** column value. Also, to avoid collation problems, this optimization is +** only attempted if the "a=123" term uses the default BINARY collation. +*/ +static int propagateConstants( + Parse *pParse, /* The parsing context */ + Select *p /* The query in which to propagate constants */ +){ + WhereConst x; + Walker w; + int nChng = 0; + x.pParse = pParse; + do{ + x.nConst = 0; + x.nChng = 0; + x.apExpr = 0; + findConstInWhere(&x, p->pWhere); + if( x.nConst ){ + memset(&w, 0, sizeof(w)); + w.pParse = pParse; + w.xExprCallback = propagateConstantExprRewrite; + w.xSelectCallback = sqlite3SelectWalkNoop; + w.xSelectCallback2 = 0; + w.walkerDepth = 0; + w.u.pConst = &x; + sqlite3WalkExpr(&w, p->pWhere); + sqlite3DbFree(x.pParse->db, x.apExpr); + nChng += x.nChng; + } + }while( x.nChng ); + return nChng; +} + +#if !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW) +/* +** Make copies of relevant WHERE clause terms of the outer query into +** the WHERE clause of subquery. Example: +** +** SELECT * FROM (SELECT a AS x, c-d AS y FROM t1) WHERE x=5 AND y=10; +** +** Transformed into: +** +** SELECT * FROM (SELECT a AS x, c-d AS y FROM t1 WHERE a=5 AND c-d=10) +** WHERE x=5 AND y=10; +** +** The hope is that the terms added to the inner query will make it more +** efficient. +** +** Do not attempt this optimization if: +** +** (1) (** This restriction was removed on 2017-09-29. We used to +** disallow this optimization for aggregate subqueries, but now +** it is allowed by putting the extra terms on the HAVING clause. +** The added HAVING clause is pointless if the subquery lacks +** a GROUP BY clause. But such a HAVING clause is also harmless +** so there does not appear to be any reason to add extra logic +** to suppress it. **) +** +** (2) The inner query is the recursive part of a common table expression. +** +** (3) The inner query has a LIMIT clause (since the changes to the WHERE +** clause would change the meaning of the LIMIT). +** +** (4) The inner query is the right operand of a LEFT JOIN and the +** expression to be pushed down does not come from the ON clause +** on that LEFT JOIN. +** +** (5) The WHERE clause expression originates in the ON or USING clause +** of a LEFT JOIN where iCursor is not the right-hand table of that +** left join. An example: +** +** SELECT * +** FROM (SELECT 1 AS a1 UNION ALL SELECT 2) AS aa +** JOIN (SELECT 1 AS b2 UNION ALL SELECT 2) AS bb ON (a1=b2) +** LEFT JOIN (SELECT 8 AS c3 UNION ALL SELECT 9) AS cc ON (b2=2); +** +** The correct answer is three rows: (1,1,NULL),(2,2,8),(2,2,9). +** But if the (b2=2) term were to be pushed down into the bb subquery, +** then the (1,1,NULL) row would be suppressed. +** +** (6) The inner query features one or more window-functions (since +** changes to the WHERE clause of the inner query could change the +** window over which window functions are calculated). +** +** Return 0 if no changes are made and non-zero if one or more WHERE clause +** terms are duplicated into the subquery. +*/ +static int pushDownWhereTerms( + Parse *pParse, /* Parse context (for malloc() and error reporting) */ + Select *pSubq, /* The subquery whose WHERE clause is to be augmented */ + Expr *pWhere, /* The WHERE clause of the outer query */ + int iCursor, /* Cursor number of the subquery */ + int isLeftJoin /* True if pSubq is the right term of a LEFT JOIN */ +){ + Expr *pNew; + int nChng = 0; + Select *pSel; + if( pWhere==0 ) return 0; + if( pSubq->selFlags & SF_Recursive ) return 0; /* restriction (2) */ + +#ifndef SQLITE_OMIT_WINDOWFUNC + for(pSel=pSubq; pSel; pSel=pSel->pPrior){ + if( pSel->pWin ) return 0; /* restriction (6) */ + } +#endif + +#ifdef SQLITE_DEBUG + /* Only the first term of a compound can have a WITH clause. But make + ** sure no other terms are marked SF_Recursive in case something changes + ** in the future. + */ + { + Select *pX; + for(pX=pSubq; pX; pX=pX->pPrior){ + assert( (pX->selFlags & (SF_Recursive))==0 ); + } + } +#endif + + if( pSubq->pLimit!=0 ){ + return 0; /* restriction (3) */ + } + while( pWhere->op==TK_AND ){ + nChng += pushDownWhereTerms(pParse, pSubq, pWhere->pRight, + iCursor, isLeftJoin); + pWhere = pWhere->pLeft; + } + if( isLeftJoin + && (ExprHasProperty(pWhere,EP_FromJoin)==0 + || pWhere->iRightJoinTable!=iCursor) + ){ + return 0; /* restriction (4) */ + } + if( ExprHasProperty(pWhere,EP_FromJoin) && pWhere->iRightJoinTable!=iCursor ){ + return 0; /* restriction (5) */ + } + if( sqlite3ExprIsTableConstant(pWhere, iCursor) ){ + nChng++; + while( pSubq ){ + SubstContext x; + pNew = sqlite3ExprDup(pParse->db, pWhere, 0); + unsetJoinExpr(pNew, -1); + x.pParse = pParse; + x.iTable = iCursor; + x.iNewTable = iCursor; + x.isLeftJoin = 0; + x.pEList = pSubq->pEList; + pNew = substExpr(&x, pNew); + if( pSubq->selFlags & SF_Aggregate ){ + pSubq->pHaving = sqlite3ExprAnd(pParse, pSubq->pHaving, pNew); + }else{ + pSubq->pWhere = sqlite3ExprAnd(pParse, pSubq->pWhere, pNew); + } + pSubq = pSubq->pPrior; + } + } + return nChng; +} +#endif /* !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW) */ + +/* +** The pFunc is the only aggregate function in the query. Check to see +** if the query is a candidate for the min/max optimization. +** +** If the query is a candidate for the min/max optimization, then set +** *ppMinMax to be an ORDER BY clause to be used for the optimization +** and return either WHERE_ORDERBY_MIN or WHERE_ORDERBY_MAX depending on +** whether pFunc is a min() or max() function. +** +** If the query is not a candidate for the min/max optimization, return +** WHERE_ORDERBY_NORMAL (which must be zero). +** +** This routine must be called after aggregate functions have been +** located but before their arguments have been subjected to aggregate +** analysis. +*/ +static u8 minMaxQuery(sqlite3 *db, Expr *pFunc, ExprList **ppMinMax){ + int eRet = WHERE_ORDERBY_NORMAL; /* Return value */ + ExprList *pEList = pFunc->x.pList; /* Arguments to agg function */ + const char *zFunc; /* Name of aggregate function pFunc */ + ExprList *pOrderBy; + u8 sortFlags = 0; + + assert( *ppMinMax==0 ); + assert( pFunc->op==TK_AGG_FUNCTION ); + assert( !IsWindowFunc(pFunc) ); + if( pEList==0 || pEList->nExpr!=1 || ExprHasProperty(pFunc, EP_WinFunc) ){ + return eRet; + } + zFunc = pFunc->u.zToken; + if( sqlite3StrICmp(zFunc, "min")==0 ){ + eRet = WHERE_ORDERBY_MIN; + if( sqlite3ExprCanBeNull(pEList->a[0].pExpr) ){ + sortFlags = KEYINFO_ORDER_BIGNULL; + } + }else if( sqlite3StrICmp(zFunc, "max")==0 ){ + eRet = WHERE_ORDERBY_MAX; + sortFlags = KEYINFO_ORDER_DESC; + }else{ + return eRet; + } + *ppMinMax = pOrderBy = sqlite3ExprListDup(db, pEList, 0); + assert( pOrderBy!=0 || db->mallocFailed ); + if( pOrderBy ) pOrderBy->a[0].sortFlags = sortFlags; + return eRet; +} + +/* +** The select statement passed as the first argument is an aggregate query. +** The second argument is the associated aggregate-info object. This +** function tests if the SELECT is of the form: +** +** SELECT count(*) FROM +** +** where table is a database table, not a sub-select or view. If the query +** does match this pattern, then a pointer to the Table object representing +** is returned. Otherwise, 0 is returned. +*/ +static Table *isSimpleCount(Select *p, AggInfo *pAggInfo){ + Table *pTab; + Expr *pExpr; + + assert( !p->pGroupBy ); + + if( p->pWhere || p->pEList->nExpr!=1 + || p->pSrc->nSrc!=1 || p->pSrc->a[0].pSelect + ){ + return 0; + } + pTab = p->pSrc->a[0].pTab; + pExpr = p->pEList->a[0].pExpr; + assert( pTab && !pTab->pSelect && pExpr ); + + if( IsVirtual(pTab) ) return 0; + if( pExpr->op!=TK_AGG_FUNCTION ) return 0; + if( NEVER(pAggInfo->nFunc==0) ) return 0; + if( (pAggInfo->aFunc[0].pFunc->funcFlags&SQLITE_FUNC_COUNT)==0 ) return 0; + if( ExprHasProperty(pExpr, EP_Distinct|EP_WinFunc) ) return 0; + + return pTab; +} + +/* +** If the source-list item passed as an argument was augmented with an +** INDEXED BY clause, then try to locate the specified index. If there +** was such a clause and the named index cannot be found, return +** SQLITE_ERROR and leave an error in pParse. Otherwise, populate +** pFrom->pIndex and return SQLITE_OK. +*/ +int sqlite3IndexedByLookup(Parse *pParse, struct SrcList_item *pFrom){ + if( pFrom->pTab && pFrom->fg.isIndexedBy ){ + Table *pTab = pFrom->pTab; + char *zIndexedBy = pFrom->u1.zIndexedBy; + Index *pIdx; + for(pIdx=pTab->pIndex; + pIdx && sqlite3StrICmp(pIdx->zName, zIndexedBy); + pIdx=pIdx->pNext + ); + if( !pIdx ){ + sqlite3ErrorMsg(pParse, "no such index: %s", zIndexedBy, 0); + pParse->checkSchema = 1; + return SQLITE_ERROR; + } + pFrom->pIBIndex = pIdx; + } + return SQLITE_OK; +} +/* +** Detect compound SELECT statements that use an ORDER BY clause with +** an alternative collating sequence. +** +** SELECT ... FROM t1 EXCEPT SELECT ... FROM t2 ORDER BY .. COLLATE ... +** +** These are rewritten as a subquery: +** +** SELECT * FROM (SELECT ... FROM t1 EXCEPT SELECT ... FROM t2) +** ORDER BY ... COLLATE ... +** +** This transformation is necessary because the multiSelectOrderBy() routine +** above that generates the code for a compound SELECT with an ORDER BY clause +** uses a merge algorithm that requires the same collating sequence on the +** result columns as on the ORDER BY clause. See ticket +** http://www.sqlite.org/src/info/6709574d2a +** +** This transformation is only needed for EXCEPT, INTERSECT, and UNION. +** The UNION ALL operator works fine with multiSelectOrderBy() even when +** there are COLLATE terms in the ORDER BY. +*/ +static int convertCompoundSelectToSubquery(Walker *pWalker, Select *p){ + int i; + Select *pNew; + Select *pX; + sqlite3 *db; + struct ExprList_item *a; + SrcList *pNewSrc; + Parse *pParse; + Token dummy; + + if( p->pPrior==0 ) return WRC_Continue; + if( p->pOrderBy==0 ) return WRC_Continue; + for(pX=p; pX && (pX->op==TK_ALL || pX->op==TK_SELECT); pX=pX->pPrior){} + if( pX==0 ) return WRC_Continue; + a = p->pOrderBy->a; + for(i=p->pOrderBy->nExpr-1; i>=0; i--){ + if( a[i].pExpr->flags & EP_Collate ) break; + } + if( i<0 ) return WRC_Continue; + + /* If we reach this point, that means the transformation is required. */ + + pParse = pWalker->pParse; + db = pParse->db; + pNew = sqlite3DbMallocZero(db, sizeof(*pNew) ); + if( pNew==0 ) return WRC_Abort; + memset(&dummy, 0, sizeof(dummy)); + pNewSrc = sqlite3SrcListAppendFromTerm(pParse,0,0,0,&dummy,pNew,0,0); + if( pNewSrc==0 ) return WRC_Abort; + *pNew = *p; + p->pSrc = pNewSrc; + p->pEList = sqlite3ExprListAppend(pParse, 0, sqlite3Expr(db, TK_ASTERISK, 0)); + p->op = TK_SELECT; + p->pWhere = 0; + pNew->pGroupBy = 0; + pNew->pHaving = 0; + pNew->pOrderBy = 0; + p->pPrior = 0; + p->pNext = 0; + p->pWith = 0; +#ifndef SQLITE_OMIT_WINDOWFUNC + p->pWinDefn = 0; +#endif + p->selFlags &= ~SF_Compound; + assert( (p->selFlags & SF_Converted)==0 ); + p->selFlags |= SF_Converted; + assert( pNew->pPrior!=0 ); + pNew->pPrior->pNext = pNew; + pNew->pLimit = 0; + return WRC_Continue; +} + +/* +** Check to see if the FROM clause term pFrom has table-valued function +** arguments. If it does, leave an error message in pParse and return +** non-zero, since pFrom is not allowed to be a table-valued function. +*/ +static int cannotBeFunction(Parse *pParse, struct SrcList_item *pFrom){ + if( pFrom->fg.isTabFunc ){ + sqlite3ErrorMsg(pParse, "'%s' is not a function", pFrom->zName); + return 1; + } + return 0; +} + +#ifndef SQLITE_OMIT_CTE +/* +** Argument pWith (which may be NULL) points to a linked list of nested +** WITH contexts, from inner to outermost. If the table identified by +** FROM clause element pItem is really a common-table-expression (CTE) +** then return a pointer to the CTE definition for that table. Otherwise +** return NULL. +** +** If a non-NULL value is returned, set *ppContext to point to the With +** object that the returned CTE belongs to. +*/ +static struct Cte *searchWith( + With *pWith, /* Current innermost WITH clause */ + struct SrcList_item *pItem, /* FROM clause element to resolve */ + With **ppContext /* OUT: WITH clause return value belongs to */ +){ + const char *zName; + if( pItem->zDatabase==0 && (zName = pItem->zName)!=0 ){ + With *p; + for(p=pWith; p; p=p->pOuter){ + int i; + for(i=0; inCte; i++){ + if( sqlite3StrICmp(zName, p->a[i].zName)==0 ){ + *ppContext = p; + return &p->a[i]; + } + } + } + } + return 0; +} + +/* The code generator maintains a stack of active WITH clauses +** with the inner-most WITH clause being at the top of the stack. +** +** This routine pushes the WITH clause passed as the second argument +** onto the top of the stack. If argument bFree is true, then this +** WITH clause will never be popped from the stack. In this case it +** should be freed along with the Parse object. In other cases, when +** bFree==0, the With object will be freed along with the SELECT +** statement with which it is associated. +*/ +void sqlite3WithPush(Parse *pParse, With *pWith, u8 bFree){ + assert( bFree==0 || (pParse->pWith==0 && pParse->pWithToFree==0) ); + if( pWith ){ + assert( pParse->pWith!=pWith ); + pWith->pOuter = pParse->pWith; + pParse->pWith = pWith; + if( bFree ) pParse->pWithToFree = pWith; + } +} + +/* +** This function checks if argument pFrom refers to a CTE declared by +** a WITH clause on the stack currently maintained by the parser. And, +** if currently processing a CTE expression, if it is a recursive +** reference to the current CTE. +** +** If pFrom falls into either of the two categories above, pFrom->pTab +** and other fields are populated accordingly. The caller should check +** (pFrom->pTab!=0) to determine whether or not a successful match +** was found. +** +** Whether or not a match is found, SQLITE_OK is returned if no error +** occurs. If an error does occur, an error message is stored in the +** parser and some error code other than SQLITE_OK returned. +*/ +static int withExpand( + Walker *pWalker, + struct SrcList_item *pFrom +){ + Parse *pParse = pWalker->pParse; + sqlite3 *db = pParse->db; + struct Cte *pCte; /* Matched CTE (or NULL if no match) */ + With *pWith; /* WITH clause that pCte belongs to */ + + assert( pFrom->pTab==0 ); + if( pParse->nErr ){ + return SQLITE_ERROR; + } + + pCte = searchWith(pParse->pWith, pFrom, &pWith); + if( pCte ){ + Table *pTab; + ExprList *pEList; + Select *pSel; + Select *pLeft; /* Left-most SELECT statement */ + int bMayRecursive; /* True if compound joined by UNION [ALL] */ + With *pSavedWith; /* Initial value of pParse->pWith */ + + /* If pCte->zCteErr is non-NULL at this point, then this is an illegal + ** recursive reference to CTE pCte. Leave an error in pParse and return + ** early. If pCte->zCteErr is NULL, then this is not a recursive reference. + ** In this case, proceed. */ + if( pCte->zCteErr ){ + sqlite3ErrorMsg(pParse, pCte->zCteErr, pCte->zName); + return SQLITE_ERROR; + } + if( cannotBeFunction(pParse, pFrom) ) return SQLITE_ERROR; + + assert( pFrom->pTab==0 ); + pFrom->pTab = pTab = sqlite3DbMallocZero(db, sizeof(Table)); + if( pTab==0 ) return WRC_Abort; + pTab->nTabRef = 1; + pTab->zName = sqlite3DbStrDup(db, pCte->zName); + pTab->iPKey = -1; + pTab->nRowLogEst = 200; assert( 200==sqlite3LogEst(1048576) ); + pTab->tabFlags |= TF_Ephemeral | TF_NoVisibleRowid; + pFrom->pSelect = sqlite3SelectDup(db, pCte->pSelect, 0); + if( db->mallocFailed ) return SQLITE_NOMEM_BKPT; + assert( pFrom->pSelect ); + + /* Check if this is a recursive CTE. */ + pSel = pFrom->pSelect; + bMayRecursive = ( pSel->op==TK_ALL || pSel->op==TK_UNION ); + if( bMayRecursive ){ + int i; + SrcList *pSrc = pFrom->pSelect->pSrc; + for(i=0; inSrc; i++){ + struct SrcList_item *pItem = &pSrc->a[i]; + if( pItem->zDatabase==0 + && pItem->zName!=0 + && 0==sqlite3StrICmp(pItem->zName, pCte->zName) + ){ + pItem->pTab = pTab; + pItem->fg.isRecursive = 1; + pTab->nTabRef++; + pSel->selFlags |= SF_Recursive; + } + } + } + + /* Only one recursive reference is permitted. */ + if( pTab->nTabRef>2 ){ + sqlite3ErrorMsg( + pParse, "multiple references to recursive table: %s", pCte->zName + ); + return SQLITE_ERROR; + } + assert( pTab->nTabRef==1 || + ((pSel->selFlags&SF_Recursive) && pTab->nTabRef==2 )); + + pCte->zCteErr = "circular reference: %s"; + pSavedWith = pParse->pWith; + pParse->pWith = pWith; + if( bMayRecursive ){ + Select *pPrior = pSel->pPrior; + assert( pPrior->pWith==0 ); + pPrior->pWith = pSel->pWith; + sqlite3WalkSelect(pWalker, pPrior); + pPrior->pWith = 0; + }else{ + sqlite3WalkSelect(pWalker, pSel); + } + pParse->pWith = pWith; + + for(pLeft=pSel; pLeft->pPrior; pLeft=pLeft->pPrior); + pEList = pLeft->pEList; + if( pCte->pCols ){ + if( pEList && pEList->nExpr!=pCte->pCols->nExpr ){ + sqlite3ErrorMsg(pParse, "table %s has %d values for %d columns", + pCte->zName, pEList->nExpr, pCte->pCols->nExpr + ); + pParse->pWith = pSavedWith; + return SQLITE_ERROR; + } + pEList = pCte->pCols; + } + + sqlite3ColumnsFromExprList(pParse, pEList, &pTab->nCol, &pTab->aCol); + if( bMayRecursive ){ + if( pSel->selFlags & SF_Recursive ){ + pCte->zCteErr = "multiple recursive references: %s"; + }else{ + pCte->zCteErr = "recursive reference in a subquery: %s"; + } + sqlite3WalkSelect(pWalker, pSel); + } + pCte->zCteErr = 0; + pParse->pWith = pSavedWith; + } + + return SQLITE_OK; +} +#endif + +#ifndef SQLITE_OMIT_CTE +/* +** If the SELECT passed as the second argument has an associated WITH +** clause, pop it from the stack stored as part of the Parse object. +** +** This function is used as the xSelectCallback2() callback by +** sqlite3SelectExpand() when walking a SELECT tree to resolve table +** names and other FROM clause elements. +*/ +static void selectPopWith(Walker *pWalker, Select *p){ + Parse *pParse = pWalker->pParse; + if( OK_IF_ALWAYS_TRUE(pParse->pWith) && p->pPrior==0 ){ + With *pWith = findRightmost(p)->pWith; + if( pWith!=0 ){ + assert( pParse->pWith==pWith || pParse->nErr ); + pParse->pWith = pWith->pOuter; + } + } +} +#else +#define selectPopWith 0 +#endif + +/* +** The SrcList_item structure passed as the second argument represents a +** sub-query in the FROM clause of a SELECT statement. This function +** allocates and populates the SrcList_item.pTab object. If successful, +** SQLITE_OK is returned. Otherwise, if an OOM error is encountered, +** SQLITE_NOMEM. +*/ +int sqlite3ExpandSubquery(Parse *pParse, struct SrcList_item *pFrom){ + Select *pSel = pFrom->pSelect; + Table *pTab; + + assert( pSel ); + pFrom->pTab = pTab = sqlite3DbMallocZero(pParse->db, sizeof(Table)); + if( pTab==0 ) return SQLITE_NOMEM; + pTab->nTabRef = 1; + if( pFrom->zAlias ){ + pTab->zName = sqlite3DbStrDup(pParse->db, pFrom->zAlias); + }else{ + pTab->zName = sqlite3MPrintf(pParse->db, "subquery_%u", pSel->selId); + } + while( pSel->pPrior ){ pSel = pSel->pPrior; } + sqlite3ColumnsFromExprList(pParse, pSel->pEList,&pTab->nCol,&pTab->aCol); + pTab->iPKey = -1; + pTab->nRowLogEst = 200; assert( 200==sqlite3LogEst(1048576) ); + pTab->tabFlags |= TF_Ephemeral; + + return pParse->nErr ? SQLITE_ERROR : SQLITE_OK; +} + +/* +** This routine is a Walker callback for "expanding" a SELECT statement. +** "Expanding" means to do the following: +** +** (1) Make sure VDBE cursor numbers have been assigned to every +** element of the FROM clause. +** +** (2) Fill in the pTabList->a[].pTab fields in the SrcList that +** defines FROM clause. When views appear in the FROM clause, +** fill pTabList->a[].pSelect with a copy of the SELECT statement +** that implements the view. A copy is made of the view's SELECT +** statement so that we can freely modify or delete that statement +** without worrying about messing up the persistent representation +** of the view. +** +** (3) Add terms to the WHERE clause to accommodate the NATURAL keyword +** on joins and the ON and USING clause of joins. +** +** (4) Scan the list of columns in the result set (pEList) looking +** for instances of the "*" operator or the TABLE.* operator. +** If found, expand each "*" to be every column in every table +** and TABLE.* to be every column in TABLE. +** +*/ +static int selectExpander(Walker *pWalker, Select *p){ + Parse *pParse = pWalker->pParse; + int i, j, k; + SrcList *pTabList; + ExprList *pEList; + struct SrcList_item *pFrom; + sqlite3 *db = pParse->db; + Expr *pE, *pRight, *pExpr; + u16 selFlags = p->selFlags; + u32 elistFlags = 0; + + p->selFlags |= SF_Expanded; + if( db->mallocFailed ){ + return WRC_Abort; + } + assert( p->pSrc!=0 ); + if( (selFlags & SF_Expanded)!=0 ){ + return WRC_Prune; + } + if( pWalker->eCode ){ + /* Renumber selId because it has been copied from a view */ + p->selId = ++pParse->nSelect; + } + pTabList = p->pSrc; + pEList = p->pEList; + sqlite3WithPush(pParse, p->pWith, 0); + + /* Make sure cursor numbers have been assigned to all entries in + ** the FROM clause of the SELECT statement. + */ + sqlite3SrcListAssignCursors(pParse, pTabList); + + /* Look up every table named in the FROM clause of the select. If + ** an entry of the FROM clause is a subquery instead of a table or view, + ** then create a transient table structure to describe the subquery. + */ + for(i=0, pFrom=pTabList->a; inSrc; i++, pFrom++){ + Table *pTab; + assert( pFrom->fg.isRecursive==0 || pFrom->pTab!=0 ); + if( pFrom->fg.isRecursive ) continue; + assert( pFrom->pTab==0 ); +#ifndef SQLITE_OMIT_CTE + if( withExpand(pWalker, pFrom) ) return WRC_Abort; + if( pFrom->pTab ) {} else +#endif + if( pFrom->zName==0 ){ +#ifndef SQLITE_OMIT_SUBQUERY + Select *pSel = pFrom->pSelect; + /* A sub-query in the FROM clause of a SELECT */ + assert( pSel!=0 ); + assert( pFrom->pTab==0 ); + if( sqlite3WalkSelect(pWalker, pSel) ) return WRC_Abort; + if( sqlite3ExpandSubquery(pParse, pFrom) ) return WRC_Abort; +#endif + }else{ + /* An ordinary table or view name in the FROM clause */ + assert( pFrom->pTab==0 ); + pFrom->pTab = pTab = sqlite3LocateTableItem(pParse, 0, pFrom); + if( pTab==0 ) return WRC_Abort; + if( pTab->nTabRef>=0xffff ){ + sqlite3ErrorMsg(pParse, "too many references to \"%s\": max 65535", + pTab->zName); + pFrom->pTab = 0; + return WRC_Abort; + } + pTab->nTabRef++; + if( !IsVirtual(pTab) && cannotBeFunction(pParse, pFrom) ){ + return WRC_Abort; + } +#if !defined(SQLITE_OMIT_VIEW) || !defined(SQLITE_OMIT_VIRTUALTABLE) + if( IsVirtual(pTab) || pTab->pSelect ){ + i16 nCol; + u8 eCodeOrig = pWalker->eCode; + if( sqlite3ViewGetColumnNames(pParse, pTab) ) return WRC_Abort; + assert( pFrom->pSelect==0 ); + if( pTab->pSelect && (db->flags & SQLITE_EnableView)==0 ){ + sqlite3ErrorMsg(pParse, "access to view \"%s\" prohibited", + pTab->zName); + } +#ifndef SQLITE_OMIT_VIRTUALTABLE + if( IsVirtual(pTab) + && pFrom->fg.fromDDL + && ALWAYS(pTab->pVTable!=0) + && pTab->pVTable->eVtabRisk > ((db->flags & SQLITE_TrustedSchema)!=0) + ){ + sqlite3ErrorMsg(pParse, "unsafe use of virtual table \"%s\"", + pTab->zName); + } +#endif + pFrom->pSelect = sqlite3SelectDup(db, pTab->pSelect, 0); + nCol = pTab->nCol; + pTab->nCol = -1; + pWalker->eCode = 1; /* Turn on Select.selId renumbering */ + sqlite3WalkSelect(pWalker, pFrom->pSelect); + pWalker->eCode = eCodeOrig; + pTab->nCol = nCol; + } +#endif + } + + /* Locate the index named by the INDEXED BY clause, if any. */ + if( sqlite3IndexedByLookup(pParse, pFrom) ){ + return WRC_Abort; + } + } + + /* Process NATURAL keywords, and ON and USING clauses of joins. + */ + if( pParse->nErr || db->mallocFailed || sqliteProcessJoin(pParse, p) ){ + return WRC_Abort; + } + + /* For every "*" that occurs in the column list, insert the names of + ** all columns in all tables. And for every TABLE.* insert the names + ** of all columns in TABLE. The parser inserted a special expression + ** with the TK_ASTERISK operator for each "*" that it found in the column + ** list. The following code just has to locate the TK_ASTERISK + ** expressions and expand each one to the list of all columns in + ** all tables. + ** + ** The first loop just checks to see if there are any "*" operators + ** that need expanding. + */ + for(k=0; knExpr; k++){ + pE = pEList->a[k].pExpr; + if( pE->op==TK_ASTERISK ) break; + assert( pE->op!=TK_DOT || pE->pRight!=0 ); + assert( pE->op!=TK_DOT || (pE->pLeft!=0 && pE->pLeft->op==TK_ID) ); + if( pE->op==TK_DOT && pE->pRight->op==TK_ASTERISK ) break; + elistFlags |= pE->flags; + } + if( knExpr ){ + /* + ** If we get here it means the result set contains one or more "*" + ** operators that need to be expanded. Loop through each expression + ** in the result set and expand them one by one. + */ + struct ExprList_item *a = pEList->a; + ExprList *pNew = 0; + int flags = pParse->db->flags; + int longNames = (flags & SQLITE_FullColNames)!=0 + && (flags & SQLITE_ShortColNames)==0; + + for(k=0; knExpr; k++){ + pE = a[k].pExpr; + elistFlags |= pE->flags; + pRight = pE->pRight; + assert( pE->op!=TK_DOT || pRight!=0 ); + if( pE->op!=TK_ASTERISK + && (pE->op!=TK_DOT || pRight->op!=TK_ASTERISK) + ){ + /* This particular expression does not need to be expanded. + */ + pNew = sqlite3ExprListAppend(pParse, pNew, a[k].pExpr); + if( pNew ){ + pNew->a[pNew->nExpr-1].zEName = a[k].zEName; + pNew->a[pNew->nExpr-1].eEName = a[k].eEName; + a[k].zEName = 0; + } + a[k].pExpr = 0; + }else{ + /* This expression is a "*" or a "TABLE.*" and needs to be + ** expanded. */ + int tableSeen = 0; /* Set to 1 when TABLE matches */ + char *zTName = 0; /* text of name of TABLE */ + if( pE->op==TK_DOT ){ + assert( pE->pLeft!=0 ); + assert( !ExprHasProperty(pE->pLeft, EP_IntValue) ); + zTName = pE->pLeft->u.zToken; + } + for(i=0, pFrom=pTabList->a; inSrc; i++, pFrom++){ + Table *pTab = pFrom->pTab; + Select *pSub = pFrom->pSelect; + char *zTabName = pFrom->zAlias; + const char *zSchemaName = 0; + int iDb; + if( zTabName==0 ){ + zTabName = pTab->zName; + } + if( db->mallocFailed ) break; + if( pSub==0 || (pSub->selFlags & SF_NestedFrom)==0 ){ + pSub = 0; + if( zTName && sqlite3StrICmp(zTName, zTabName)!=0 ){ + continue; + } + iDb = sqlite3SchemaToIndex(db, pTab->pSchema); + zSchemaName = iDb>=0 ? db->aDb[iDb].zDbSName : "*"; + } + for(j=0; jnCol; j++){ + char *zName = pTab->aCol[j].zName; + char *zColname; /* The computed column name */ + char *zToFree; /* Malloced string that needs to be freed */ + Token sColname; /* Computed column name as a token */ + + assert( zName ); + if( zTName && pSub + && sqlite3MatchEName(&pSub->pEList->a[j], 0, zTName, 0)==0 + ){ + continue; + } + + /* If a column is marked as 'hidden', omit it from the expanded + ** result-set list unless the SELECT has the SF_IncludeHidden + ** bit set. + */ + if( (p->selFlags & SF_IncludeHidden)==0 + && IsHiddenColumn(&pTab->aCol[j]) + ){ + continue; + } + tableSeen = 1; + + if( i>0 && zTName==0 ){ + if( (pFrom->fg.jointype & JT_NATURAL)!=0 + && tableAndColumnIndex(pTabList, i, zName, 0, 0, 1) + ){ + /* In a NATURAL join, omit the join columns from the + ** table to the right of the join */ + continue; + } + if( sqlite3IdListIndex(pFrom->pUsing, zName)>=0 ){ + /* In a join with a USING clause, omit columns in the + ** using clause from the table on the right. */ + continue; + } + } + pRight = sqlite3Expr(db, TK_ID, zName); + zColname = zName; + zToFree = 0; + if( longNames || pTabList->nSrc>1 ){ + Expr *pLeft; + pLeft = sqlite3Expr(db, TK_ID, zTabName); + pExpr = sqlite3PExpr(pParse, TK_DOT, pLeft, pRight); + if( zSchemaName ){ + pLeft = sqlite3Expr(db, TK_ID, zSchemaName); + pExpr = sqlite3PExpr(pParse, TK_DOT, pLeft, pExpr); + } + if( longNames ){ + zColname = sqlite3MPrintf(db, "%s.%s", zTabName, zName); + zToFree = zColname; + } + }else{ + pExpr = pRight; + } + pNew = sqlite3ExprListAppend(pParse, pNew, pExpr); + sqlite3TokenInit(&sColname, zColname); + sqlite3ExprListSetName(pParse, pNew, &sColname, 0); + if( pNew && (p->selFlags & SF_NestedFrom)!=0 && !IN_RENAME_OBJECT ){ + struct ExprList_item *pX = &pNew->a[pNew->nExpr-1]; + sqlite3DbFree(db, pX->zEName); + if( pSub ){ + pX->zEName = sqlite3DbStrDup(db, pSub->pEList->a[j].zEName); + testcase( pX->zEName==0 ); + }else{ + pX->zEName = sqlite3MPrintf(db, "%s.%s.%s", + zSchemaName, zTabName, zColname); + testcase( pX->zEName==0 ); + } + pX->eEName = ENAME_TAB; + } + sqlite3DbFree(db, zToFree); + } + } + if( !tableSeen ){ + if( zTName ){ + sqlite3ErrorMsg(pParse, "no such table: %s", zTName); + }else{ + sqlite3ErrorMsg(pParse, "no tables specified"); + } + } + } + } + sqlite3ExprListDelete(db, pEList); + p->pEList = pNew; + } + if( p->pEList ){ + if( p->pEList->nExpr>db->aLimit[SQLITE_LIMIT_COLUMN] ){ + sqlite3ErrorMsg(pParse, "too many columns in result set"); + return WRC_Abort; + } + if( (elistFlags & (EP_HasFunc|EP_Subquery))!=0 ){ + p->selFlags |= SF_ComplexResult; + } + } + return WRC_Continue; +} + +#if SQLITE_DEBUG +/* +** Always assert. This xSelectCallback2 implementation proves that the +** xSelectCallback2 is never invoked. +*/ +void sqlite3SelectWalkAssert2(Walker *NotUsed, Select *NotUsed2){ + UNUSED_PARAMETER2(NotUsed, NotUsed2); + assert( 0 ); +} +#endif +/* +** This routine "expands" a SELECT statement and all of its subqueries. +** For additional information on what it means to "expand" a SELECT +** statement, see the comment on the selectExpand worker callback above. +** +** Expanding a SELECT statement is the first step in processing a +** SELECT statement. The SELECT statement must be expanded before +** name resolution is performed. +** +** If anything goes wrong, an error message is written into pParse. +** The calling function can detect the problem by looking at pParse->nErr +** and/or pParse->db->mallocFailed. +*/ +static void sqlite3SelectExpand(Parse *pParse, Select *pSelect){ + Walker w; + w.xExprCallback = sqlite3ExprWalkNoop; + w.pParse = pParse; + if( OK_IF_ALWAYS_TRUE(pParse->hasCompound) ){ + w.xSelectCallback = convertCompoundSelectToSubquery; + w.xSelectCallback2 = 0; + sqlite3WalkSelect(&w, pSelect); + } + w.xSelectCallback = selectExpander; + w.xSelectCallback2 = selectPopWith; + w.eCode = 0; + sqlite3WalkSelect(&w, pSelect); +} + + +#ifndef SQLITE_OMIT_SUBQUERY +/* +** This is a Walker.xSelectCallback callback for the sqlite3SelectTypeInfo() +** interface. +** +** For each FROM-clause subquery, add Column.zType and Column.zColl +** information to the Table structure that represents the result set +** of that subquery. +** +** The Table structure that represents the result set was constructed +** by selectExpander() but the type and collation information was omitted +** at that point because identifiers had not yet been resolved. This +** routine is called after identifier resolution. +*/ +static void selectAddSubqueryTypeInfo(Walker *pWalker, Select *p){ + Parse *pParse; + int i; + SrcList *pTabList; + struct SrcList_item *pFrom; + + assert( p->selFlags & SF_Resolved ); + if( p->selFlags & SF_HasTypeInfo ) return; + p->selFlags |= SF_HasTypeInfo; + pParse = pWalker->pParse; + pTabList = p->pSrc; + for(i=0, pFrom=pTabList->a; inSrc; i++, pFrom++){ + Table *pTab = pFrom->pTab; + assert( pTab!=0 ); + if( (pTab->tabFlags & TF_Ephemeral)!=0 ){ + /* A sub-query in the FROM clause of a SELECT */ + Select *pSel = pFrom->pSelect; + if( pSel ){ + while( pSel->pPrior ) pSel = pSel->pPrior; + sqlite3SelectAddColumnTypeAndCollation(pParse, pTab, pSel, + SQLITE_AFF_NONE); + } + } + } +} +#endif + + +/* +** This routine adds datatype and collating sequence information to +** the Table structures of all FROM-clause subqueries in a +** SELECT statement. +** +** Use this routine after name resolution. +*/ +static void sqlite3SelectAddTypeInfo(Parse *pParse, Select *pSelect){ +#ifndef SQLITE_OMIT_SUBQUERY + Walker w; + w.xSelectCallback = sqlite3SelectWalkNoop; + w.xSelectCallback2 = selectAddSubqueryTypeInfo; + w.xExprCallback = sqlite3ExprWalkNoop; + w.pParse = pParse; + sqlite3WalkSelect(&w, pSelect); +#endif +} + + +/* +** This routine sets up a SELECT statement for processing. The +** following is accomplished: +** +** * VDBE Cursor numbers are assigned to all FROM-clause terms. +** * Ephemeral Table objects are created for all FROM-clause subqueries. +** * ON and USING clauses are shifted into WHERE statements +** * Wildcards "*" and "TABLE.*" in result sets are expanded. +** * Identifiers in expression are matched to tables. +** +** This routine acts recursively on all subqueries within the SELECT. +*/ +void sqlite3SelectPrep( + Parse *pParse, /* The parser context */ + Select *p, /* The SELECT statement being coded. */ + NameContext *pOuterNC /* Name context for container */ +){ + assert( p!=0 || pParse->db->mallocFailed ); + if( pParse->db->mallocFailed ) return; + if( p->selFlags & SF_HasTypeInfo ) return; + sqlite3SelectExpand(pParse, p); + if( pParse->nErr || pParse->db->mallocFailed ) return; + sqlite3ResolveSelectNames(pParse, p, pOuterNC); + if( pParse->nErr || pParse->db->mallocFailed ) return; + sqlite3SelectAddTypeInfo(pParse, p); +} + +/* +** Reset the aggregate accumulator. +** +** The aggregate accumulator is a set of memory cells that hold +** intermediate results while calculating an aggregate. This +** routine generates code that stores NULLs in all of those memory +** cells. +*/ +static void resetAccumulator(Parse *pParse, AggInfo *pAggInfo){ + Vdbe *v = pParse->pVdbe; + int i; + struct AggInfo_func *pFunc; + int nReg = pAggInfo->nFunc + pAggInfo->nColumn; + if( nReg==0 ) return; + if( pParse->nErr ) return; +#ifdef SQLITE_DEBUG + /* Verify that all AggInfo registers are within the range specified by + ** AggInfo.mnReg..AggInfo.mxReg */ + assert( nReg==pAggInfo->mxReg-pAggInfo->mnReg+1 ); + for(i=0; inColumn; i++){ + assert( pAggInfo->aCol[i].iMem>=pAggInfo->mnReg + && pAggInfo->aCol[i].iMem<=pAggInfo->mxReg ); + } + for(i=0; inFunc; i++){ + assert( pAggInfo->aFunc[i].iMem>=pAggInfo->mnReg + && pAggInfo->aFunc[i].iMem<=pAggInfo->mxReg ); + } +#endif + sqlite3VdbeAddOp3(v, OP_Null, 0, pAggInfo->mnReg, pAggInfo->mxReg); + for(pFunc=pAggInfo->aFunc, i=0; inFunc; i++, pFunc++){ + if( pFunc->iDistinct>=0 ){ + Expr *pE = pFunc->pExpr; + assert( !ExprHasProperty(pE, EP_xIsSelect) ); + if( pE->x.pList==0 || pE->x.pList->nExpr!=1 ){ + sqlite3ErrorMsg(pParse, "DISTINCT aggregates must have exactly one " + "argument"); + pFunc->iDistinct = -1; + }else{ + KeyInfo *pKeyInfo = sqlite3KeyInfoFromExprList(pParse, pE->x.pList,0,0); + sqlite3VdbeAddOp4(v, OP_OpenEphemeral, pFunc->iDistinct, 0, 0, + (char*)pKeyInfo, P4_KEYINFO); + } + } + } +} + +/* +** Invoke the OP_AggFinalize opcode for every aggregate function +** in the AggInfo structure. +*/ +static void finalizeAggFunctions(Parse *pParse, AggInfo *pAggInfo){ + Vdbe *v = pParse->pVdbe; + int i; + struct AggInfo_func *pF; + for(i=0, pF=pAggInfo->aFunc; inFunc; i++, pF++){ + ExprList *pList = pF->pExpr->x.pList; + assert( !ExprHasProperty(pF->pExpr, EP_xIsSelect) ); + sqlite3VdbeAddOp2(v, OP_AggFinal, pF->iMem, pList ? pList->nExpr : 0); + sqlite3VdbeAppendP4(v, pF->pFunc, P4_FUNCDEF); + } +} + + +/* +** Update the accumulator memory cells for an aggregate based on +** the current cursor position. +** +** If regAcc is non-zero and there are no min() or max() aggregates +** in pAggInfo, then only populate the pAggInfo->nAccumulator accumulator +** registers if register regAcc contains 0. The caller will take care +** of setting and clearing regAcc. +*/ +static void updateAccumulator(Parse *pParse, int regAcc, AggInfo *pAggInfo){ + Vdbe *v = pParse->pVdbe; + int i; + int regHit = 0; + int addrHitTest = 0; + struct AggInfo_func *pF; + struct AggInfo_col *pC; + + pAggInfo->directMode = 1; + for(i=0, pF=pAggInfo->aFunc; inFunc; i++, pF++){ + int nArg; + int addrNext = 0; + int regAgg; + ExprList *pList = pF->pExpr->x.pList; + assert( !ExprHasProperty(pF->pExpr, EP_xIsSelect) ); + assert( !IsWindowFunc(pF->pExpr) ); + if( ExprHasProperty(pF->pExpr, EP_WinFunc) ){ + Expr *pFilter = pF->pExpr->y.pWin->pFilter; + if( pAggInfo->nAccumulator + && (pF->pFunc->funcFlags & SQLITE_FUNC_NEEDCOLL) + ){ + if( regHit==0 ) regHit = ++pParse->nMem; + /* If this is the first row of the group (regAcc==0), clear the + ** "magnet" register regHit so that the accumulator registers + ** are populated if the FILTER clause jumps over the the + ** invocation of min() or max() altogether. Or, if this is not + ** the first row (regAcc==1), set the magnet register so that the + ** accumulators are not populated unless the min()/max() is invoked and + ** indicates that they should be. */ + sqlite3VdbeAddOp2(v, OP_Copy, regAcc, regHit); + } + addrNext = sqlite3VdbeMakeLabel(pParse); + sqlite3ExprIfFalse(pParse, pFilter, addrNext, SQLITE_JUMPIFNULL); + } + if( pList ){ + nArg = pList->nExpr; + regAgg = sqlite3GetTempRange(pParse, nArg); + sqlite3ExprCodeExprList(pParse, pList, regAgg, 0, SQLITE_ECEL_DUP); + }else{ + nArg = 0; + regAgg = 0; + } + if( pF->iDistinct>=0 ){ + if( addrNext==0 ){ + addrNext = sqlite3VdbeMakeLabel(pParse); + } + testcase( nArg==0 ); /* Error condition */ + testcase( nArg>1 ); /* Also an error */ + codeDistinct(pParse, pF->iDistinct, addrNext, 1, regAgg); + } + if( pF->pFunc->funcFlags & SQLITE_FUNC_NEEDCOLL ){ + CollSeq *pColl = 0; + struct ExprList_item *pItem; + int j; + assert( pList!=0 ); /* pList!=0 if pF->pFunc has NEEDCOLL */ + for(j=0, pItem=pList->a; !pColl && jpExpr); + } + if( !pColl ){ + pColl = pParse->db->pDfltColl; + } + if( regHit==0 && pAggInfo->nAccumulator ) regHit = ++pParse->nMem; + sqlite3VdbeAddOp4(v, OP_CollSeq, regHit, 0, 0, (char *)pColl, P4_COLLSEQ); + } + sqlite3VdbeAddOp3(v, OP_AggStep, 0, regAgg, pF->iMem); + sqlite3VdbeAppendP4(v, pF->pFunc, P4_FUNCDEF); + sqlite3VdbeChangeP5(v, (u8)nArg); + sqlite3ReleaseTempRange(pParse, regAgg, nArg); + if( addrNext ){ + sqlite3VdbeResolveLabel(v, addrNext); + } + } + if( regHit==0 && pAggInfo->nAccumulator ){ + regHit = regAcc; + } + if( regHit ){ + addrHitTest = sqlite3VdbeAddOp1(v, OP_If, regHit); VdbeCoverage(v); + } + for(i=0, pC=pAggInfo->aCol; inAccumulator; i++, pC++){ + sqlite3ExprCode(pParse, pC->pExpr, pC->iMem); + } + + pAggInfo->directMode = 0; + if( addrHitTest ){ + sqlite3VdbeJumpHereOrPopInst(v, addrHitTest); + } +} + +/* +** Add a single OP_Explain instruction to the VDBE to explain a simple +** count(*) query ("SELECT count(*) FROM pTab"). +*/ +#ifndef SQLITE_OMIT_EXPLAIN +static void explainSimpleCount( + Parse *pParse, /* Parse context */ + Table *pTab, /* Table being queried */ + Index *pIdx /* Index used to optimize scan, or NULL */ +){ + if( pParse->explain==2 ){ + int bCover = (pIdx!=0 && (HasRowid(pTab) || !IsPrimaryKeyIndex(pIdx))); + sqlite3VdbeExplain(pParse, 0, "SCAN TABLE %s%s%s", + pTab->zName, + bCover ? " USING COVERING INDEX " : "", + bCover ? pIdx->zName : "" + ); + } +} +#else +# define explainSimpleCount(a,b,c) +#endif + +/* +** sqlite3WalkExpr() callback used by havingToWhere(). +** +** If the node passed to the callback is a TK_AND node, return +** WRC_Continue to tell sqlite3WalkExpr() to iterate through child nodes. +** +** Otherwise, return WRC_Prune. In this case, also check if the +** sub-expression matches the criteria for being moved to the WHERE +** clause. If so, add it to the WHERE clause and replace the sub-expression +** within the HAVING expression with a constant "1". +*/ +static int havingToWhereExprCb(Walker *pWalker, Expr *pExpr){ + if( pExpr->op!=TK_AND ){ + Select *pS = pWalker->u.pSelect; + if( sqlite3ExprIsConstantOrGroupBy(pWalker->pParse, pExpr, pS->pGroupBy) ){ + sqlite3 *db = pWalker->pParse->db; + Expr *pNew = sqlite3Expr(db, TK_INTEGER, "1"); + if( pNew ){ + Expr *pWhere = pS->pWhere; + SWAP(Expr, *pNew, *pExpr); + pNew = sqlite3ExprAnd(pWalker->pParse, pWhere, pNew); + pS->pWhere = pNew; + pWalker->eCode = 1; + } + } + return WRC_Prune; + } + return WRC_Continue; +} + +/* +** Transfer eligible terms from the HAVING clause of a query, which is +** processed after grouping, to the WHERE clause, which is processed before +** grouping. For example, the query: +** +** SELECT * FROM WHERE a=? GROUP BY b HAVING b=? AND c=? +** +** can be rewritten as: +** +** SELECT * FROM WHERE a=? AND b=? GROUP BY b HAVING c=? +** +** A term of the HAVING expression is eligible for transfer if it consists +** entirely of constants and expressions that are also GROUP BY terms that +** use the "BINARY" collation sequence. +*/ +static void havingToWhere(Parse *pParse, Select *p){ + Walker sWalker; + memset(&sWalker, 0, sizeof(sWalker)); + sWalker.pParse = pParse; + sWalker.xExprCallback = havingToWhereExprCb; + sWalker.u.pSelect = p; + sqlite3WalkExpr(&sWalker, p->pHaving); +#if SELECTTRACE_ENABLED + if( sWalker.eCode && (sqlite3SelectTrace & 0x100)!=0 ){ + SELECTTRACE(0x100,pParse,p,("Move HAVING terms into WHERE:\n")); + sqlite3TreeViewSelect(0, p, 0); + } +#endif +} + +/* +** Check to see if the pThis entry of pTabList is a self-join of a prior view. +** If it is, then return the SrcList_item for the prior view. If it is not, +** then return 0. +*/ +static struct SrcList_item *isSelfJoinView( + SrcList *pTabList, /* Search for self-joins in this FROM clause */ + struct SrcList_item *pThis /* Search for prior reference to this subquery */ +){ + struct SrcList_item *pItem; + for(pItem = pTabList->a; pItempSelect==0 ) continue; + if( pItem->fg.viaCoroutine ) continue; + if( pItem->zName==0 ) continue; + assert( pItem->pTab!=0 ); + assert( pThis->pTab!=0 ); + if( pItem->pTab->pSchema!=pThis->pTab->pSchema ) continue; + if( sqlite3_stricmp(pItem->zName, pThis->zName)!=0 ) continue; + pS1 = pItem->pSelect; + if( pItem->pTab->pSchema==0 && pThis->pSelect->selId!=pS1->selId ){ + /* The query flattener left two different CTE tables with identical + ** names in the same FROM clause. */ + continue; + } + if( sqlite3ExprCompare(0, pThis->pSelect->pWhere, pS1->pWhere, -1) + || sqlite3ExprCompare(0, pThis->pSelect->pHaving, pS1->pHaving, -1) + ){ + /* The view was modified by some other optimization such as + ** pushDownWhereTerms() */ + continue; + } + return pItem; + } + return 0; +} + +#ifdef SQLITE_COUNTOFVIEW_OPTIMIZATION +/* +** Attempt to transform a query of the form +** +** SELECT count(*) FROM (SELECT x FROM t1 UNION ALL SELECT y FROM t2) +** +** Into this: +** +** SELECT (SELECT count(*) FROM t1)+(SELECT count(*) FROM t2) +** +** The transformation only works if all of the following are true: +** +** * The subquery is a UNION ALL of two or more terms +** * The subquery does not have a LIMIT clause +** * There is no WHERE or GROUP BY or HAVING clauses on the subqueries +** * The outer query is a simple count(*) with no WHERE clause or other +** extraneous syntax. +** +** Return TRUE if the optimization is undertaken. +*/ +static int countOfViewOptimization(Parse *pParse, Select *p){ + Select *pSub, *pPrior; + Expr *pExpr; + Expr *pCount; + sqlite3 *db; + if( (p->selFlags & SF_Aggregate)==0 ) return 0; /* This is an aggregate */ + if( p->pEList->nExpr!=1 ) return 0; /* Single result column */ + if( p->pWhere ) return 0; + if( p->pGroupBy ) return 0; + pExpr = p->pEList->a[0].pExpr; + if( pExpr->op!=TK_AGG_FUNCTION ) return 0; /* Result is an aggregate */ + if( sqlite3_stricmp(pExpr->u.zToken,"count") ) return 0; /* Is count() */ + if( pExpr->x.pList!=0 ) return 0; /* Must be count(*) */ + if( p->pSrc->nSrc!=1 ) return 0; /* One table in FROM */ + pSub = p->pSrc->a[0].pSelect; + if( pSub==0 ) return 0; /* The FROM is a subquery */ + if( pSub->pPrior==0 ) return 0; /* Must be a compound ry */ + do{ + if( pSub->op!=TK_ALL && pSub->pPrior ) return 0; /* Must be UNION ALL */ + if( pSub->pWhere ) return 0; /* No WHERE clause */ + if( pSub->pLimit ) return 0; /* No LIMIT clause */ + if( pSub->selFlags & SF_Aggregate ) return 0; /* Not an aggregate */ + pSub = pSub->pPrior; /* Repeat over compound */ + }while( pSub ); + + /* If we reach this point then it is OK to perform the transformation */ + + db = pParse->db; + pCount = pExpr; + pExpr = 0; + pSub = p->pSrc->a[0].pSelect; + p->pSrc->a[0].pSelect = 0; + sqlite3SrcListDelete(db, p->pSrc); + p->pSrc = sqlite3DbMallocZero(pParse->db, sizeof(*p->pSrc)); + while( pSub ){ + Expr *pTerm; + pPrior = pSub->pPrior; + pSub->pPrior = 0; + pSub->pNext = 0; + pSub->selFlags |= SF_Aggregate; + pSub->selFlags &= ~SF_Compound; + pSub->nSelectRow = 0; + sqlite3ExprListDelete(db, pSub->pEList); + pTerm = pPrior ? sqlite3ExprDup(db, pCount, 0) : pCount; + pSub->pEList = sqlite3ExprListAppend(pParse, 0, pTerm); + pTerm = sqlite3PExpr(pParse, TK_SELECT, 0, 0); + sqlite3PExprAddSelect(pParse, pTerm, pSub); + if( pExpr==0 ){ + pExpr = pTerm; + }else{ + pExpr = sqlite3PExpr(pParse, TK_PLUS, pTerm, pExpr); + } + pSub = pPrior; + } + p->pEList->a[0].pExpr = pExpr; + p->selFlags &= ~SF_Aggregate; + +#if SELECTTRACE_ENABLED + if( sqlite3SelectTrace & 0x400 ){ + SELECTTRACE(0x400,pParse,p,("After count-of-view optimization:\n")); + sqlite3TreeViewSelect(0, p, 0); + } +#endif + return 1; +} +#endif /* SQLITE_COUNTOFVIEW_OPTIMIZATION */ + +/* +** Generate code for the SELECT statement given in the p argument. +** +** The results are returned according to the SelectDest structure. +** See comments in sqliteInt.h for further information. +** +** This routine returns the number of errors. If any errors are +** encountered, then an appropriate error message is left in +** pParse->zErrMsg. +** +** This routine does NOT free the Select structure passed in. The +** calling function needs to do that. +*/ +int sqlite3Select( + Parse *pParse, /* The parser context */ + Select *p, /* The SELECT statement being coded. */ + SelectDest *pDest /* What to do with the query results */ +){ + int i, j; /* Loop counters */ + WhereInfo *pWInfo; /* Return from sqlite3WhereBegin() */ + Vdbe *v; /* The virtual machine under construction */ + int isAgg; /* True for select lists like "count(*)" */ + ExprList *pEList = 0; /* List of columns to extract. */ + SrcList *pTabList; /* List of tables to select from */ + Expr *pWhere; /* The WHERE clause. May be NULL */ + ExprList *pGroupBy; /* The GROUP BY clause. May be NULL */ + Expr *pHaving; /* The HAVING clause. May be NULL */ + int rc = 1; /* Value to return from this function */ + DistinctCtx sDistinct; /* Info on how to code the DISTINCT keyword */ + SortCtx sSort; /* Info on how to code the ORDER BY clause */ + AggInfo sAggInfo; /* Information used by aggregate queries */ + int iEnd; /* Address of the end of the query */ + sqlite3 *db; /* The database connection */ + ExprList *pMinMaxOrderBy = 0; /* Added ORDER BY for min/max queries */ + u8 minMaxFlag; /* Flag for min/max queries */ + + db = pParse->db; + v = sqlite3GetVdbe(pParse); + if( p==0 || db->mallocFailed || pParse->nErr ){ + return 1; + } + if( sqlite3AuthCheck(pParse, SQLITE_SELECT, 0, 0, 0) ) return 1; + memset(&sAggInfo, 0, sizeof(sAggInfo)); +#ifdef SQLITE_DEBUG + sAggInfo.iAggMagic = SQLITE_AGGMAGIC_VALID; +#endif +#if SELECTTRACE_ENABLED + SELECTTRACE(1,pParse,p, ("begin processing:\n", pParse->addrExplain)); + if( sqlite3SelectTrace & 0x100 ){ + sqlite3TreeViewSelect(0, p, 0); + } +#endif + + assert( p->pOrderBy==0 || pDest->eDest!=SRT_DistFifo ); + assert( p->pOrderBy==0 || pDest->eDest!=SRT_Fifo ); + assert( p->pOrderBy==0 || pDest->eDest!=SRT_DistQueue ); + assert( p->pOrderBy==0 || pDest->eDest!=SRT_Queue ); + if( IgnorableOrderby(pDest) ){ + assert(pDest->eDest==SRT_Exists || pDest->eDest==SRT_Union || + pDest->eDest==SRT_Except || pDest->eDest==SRT_Discard || + pDest->eDest==SRT_Queue || pDest->eDest==SRT_DistFifo || + pDest->eDest==SRT_DistQueue || pDest->eDest==SRT_Fifo); + /* If ORDER BY makes no difference in the output then neither does + ** DISTINCT so it can be removed too. */ + sqlite3ExprListDelete(db, p->pOrderBy); + p->pOrderBy = 0; + p->selFlags &= ~SF_Distinct; + } + sqlite3SelectPrep(pParse, p, 0); + if( pParse->nErr || db->mallocFailed ){ + goto select_end; + } + assert( p->pEList!=0 ); +#if SELECTTRACE_ENABLED + if( sqlite3SelectTrace & 0x104 ){ + SELECTTRACE(0x104,pParse,p, ("after name resolution:\n")); + sqlite3TreeViewSelect(0, p, 0); + } +#endif + + if( pDest->eDest==SRT_Output ){ + generateColumnNames(pParse, p); + } + + pTabList = p->pSrc; + isAgg = (p->selFlags & SF_Aggregate)!=0; + memset(&sSort, 0, sizeof(sSort)); + sSort.pOrderBy = p->pOrderBy; + + /* Try to various optimizations (flattening subqueries, and strength + ** reduction of join operators) in the FROM clause up into the main query + */ +#if !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW) + for(i=0; !p->pPrior && inSrc; i++){ + struct SrcList_item *pItem = &pTabList->a[i]; + Select *pSub = pItem->pSelect; + Table *pTab = pItem->pTab; + + /* Convert LEFT JOIN into JOIN if there are terms of the right table + ** of the LEFT JOIN used in the WHERE clause. + */ + if( (pItem->fg.jointype & JT_LEFT)!=0 + && sqlite3ExprImpliesNonNullRow(p->pWhere, pItem->iCursor) + && OptimizationEnabled(db, SQLITE_SimplifyJoin) + ){ + SELECTTRACE(0x100,pParse,p, + ("LEFT-JOIN simplifies to JOIN on term %d\n",i)); + pItem->fg.jointype &= ~(JT_LEFT|JT_OUTER); + unsetJoinExpr(p->pWhere, pItem->iCursor); + } + + /* No futher action if this term of the FROM clause is no a subquery */ + if( pSub==0 ) continue; + + /* Catch mismatch in the declared columns of a view and the number of + ** columns in the SELECT on the RHS */ + if( pTab->nCol!=pSub->pEList->nExpr ){ + sqlite3ErrorMsg(pParse, "expected %d columns for '%s' but got %d", + pTab->nCol, pTab->zName, pSub->pEList->nExpr); + goto select_end; + } + + /* Do not try to flatten an aggregate subquery. + ** + ** Flattening an aggregate subquery is only possible if the outer query + ** is not a join. But if the outer query is not a join, then the subquery + ** will be implemented as a co-routine and there is no advantage to + ** flattening in that case. + */ + if( (pSub->selFlags & SF_Aggregate)!=0 ) continue; + assert( pSub->pGroupBy==0 ); + + /* If the outer query contains a "complex" result set (that is, + ** if the result set of the outer query uses functions or subqueries) + ** and if the subquery contains an ORDER BY clause and if + ** it will be implemented as a co-routine, then do not flatten. This + ** restriction allows SQL constructs like this: + ** + ** SELECT expensive_function(x) + ** FROM (SELECT x FROM tab ORDER BY y LIMIT 10); + ** + ** The expensive_function() is only computed on the 10 rows that + ** are output, rather than every row of the table. + ** + ** The requirement that the outer query have a complex result set + ** means that flattening does occur on simpler SQL constraints without + ** the expensive_function() like: + ** + ** SELECT x FROM (SELECT x FROM tab ORDER BY y LIMIT 10); + */ + if( pSub->pOrderBy!=0 + && i==0 + && (p->selFlags & SF_ComplexResult)!=0 + && (pTabList->nSrc==1 + || (pTabList->a[1].fg.jointype&(JT_LEFT|JT_CROSS))!=0) + ){ + continue; + } + + if( flattenSubquery(pParse, p, i, isAgg) ){ + if( pParse->nErr ) goto select_end; + /* This subquery can be absorbed into its parent. */ + i = -1; + } + pTabList = p->pSrc; + if( db->mallocFailed ) goto select_end; + if( !IgnorableOrderby(pDest) ){ + sSort.pOrderBy = p->pOrderBy; + } + } +#endif + +#ifndef SQLITE_OMIT_COMPOUND_SELECT + /* Handle compound SELECT statements using the separate multiSelect() + ** procedure. + */ + if( p->pPrior ){ + rc = multiSelect(pParse, p, pDest); +#if SELECTTRACE_ENABLED + SELECTTRACE(0x1,pParse,p,("end compound-select processing\n")); + if( (sqlite3SelectTrace & 0x2000)!=0 && ExplainQueryPlanParent(pParse)==0 ){ + sqlite3TreeViewSelect(0, p, 0); + } +#endif + if( p->pNext==0 ) ExplainQueryPlanPop(pParse); + return rc; + } +#endif + + /* Do the WHERE-clause constant propagation optimization if this is + ** a join. No need to speed time on this operation for non-join queries + ** as the equivalent optimization will be handled by query planner in + ** sqlite3WhereBegin(). + */ + if( pTabList->nSrc>1 + && OptimizationEnabled(db, SQLITE_PropagateConst) + && propagateConstants(pParse, p) + ){ +#if SELECTTRACE_ENABLED + if( sqlite3SelectTrace & 0x100 ){ + SELECTTRACE(0x100,pParse,p,("After constant propagation:\n")); + sqlite3TreeViewSelect(0, p, 0); + } +#endif + }else{ + SELECTTRACE(0x100,pParse,p,("Constant propagation not helpful\n")); + } + +#ifdef SQLITE_COUNTOFVIEW_OPTIMIZATION + if( OptimizationEnabled(db, SQLITE_QueryFlattener|SQLITE_CountOfView) + && countOfViewOptimization(pParse, p) + ){ + if( db->mallocFailed ) goto select_end; + pEList = p->pEList; + pTabList = p->pSrc; + } +#endif + + /* For each term in the FROM clause, do two things: + ** (1) Authorized unreferenced tables + ** (2) Generate code for all sub-queries + */ + for(i=0; inSrc; i++){ + struct SrcList_item *pItem = &pTabList->a[i]; + SelectDest dest; + Select *pSub; +#if !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW) + const char *zSavedAuthContext; +#endif + + /* Issue SQLITE_READ authorizations with a fake column name for any + ** tables that are referenced but from which no values are extracted. + ** Examples of where these kinds of null SQLITE_READ authorizations + ** would occur: + ** + ** SELECT count(*) FROM t1; -- SQLITE_READ t1."" + ** SELECT t1.* FROM t1, t2; -- SQLITE_READ t2."" + ** + ** The fake column name is an empty string. It is possible for a table to + ** have a column named by the empty string, in which case there is no way to + ** distinguish between an unreferenced table and an actual reference to the + ** "" column. The original design was for the fake column name to be a NULL, + ** which would be unambiguous. But legacy authorization callbacks might + ** assume the column name is non-NULL and segfault. The use of an empty + ** string for the fake column name seems safer. + */ + if( pItem->colUsed==0 && pItem->zName!=0 ){ + sqlite3AuthCheck(pParse, SQLITE_READ, pItem->zName, "", pItem->zDatabase); + } + +#if !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW) + /* Generate code for all sub-queries in the FROM clause + */ + pSub = pItem->pSelect; + if( pSub==0 ) continue; + + /* The code for a subquery should only be generated once, though it is + ** technically harmless for it to be generated multiple times. The + ** following assert() will detect if something changes to cause + ** the same subquery to be coded multiple times, as a signal to the + ** developers to try to optimize the situation. + ** + ** Update 2019-07-24: + ** See ticket https://sqlite.org/src/tktview/c52b09c7f38903b1311cec40. + ** The dbsqlfuzz fuzzer found a case where the same subquery gets + ** coded twice. So this assert() now becomes a testcase(). It should + ** be very rare, though. + */ + testcase( pItem->addrFillSub!=0 ); + + /* Increment Parse.nHeight by the height of the largest expression + ** tree referred to by this, the parent select. The child select + ** may contain expression trees of at most + ** (SQLITE_MAX_EXPR_DEPTH-Parse.nHeight) height. This is a bit + ** more conservative than necessary, but much easier than enforcing + ** an exact limit. + */ + pParse->nHeight += sqlite3SelectExprHeight(p); + + /* Make copies of constant WHERE-clause terms in the outer query down + ** inside the subquery. This can help the subquery to run more efficiently. + */ + if( OptimizationEnabled(db, SQLITE_PushDown) + && pushDownWhereTerms(pParse, pSub, p->pWhere, pItem->iCursor, + (pItem->fg.jointype & JT_OUTER)!=0) + ){ +#if SELECTTRACE_ENABLED + if( sqlite3SelectTrace & 0x100 ){ + SELECTTRACE(0x100,pParse,p, + ("After WHERE-clause push-down into subquery %d:\n", pSub->selId)); + sqlite3TreeViewSelect(0, p, 0); + } +#endif + }else{ + SELECTTRACE(0x100,pParse,p,("Push-down not possible\n")); + } + + zSavedAuthContext = pParse->zAuthContext; + pParse->zAuthContext = pItem->zName; + + /* Generate code to implement the subquery + ** + ** The subquery is implemented as a co-routine if the subquery is + ** guaranteed to be the outer loop (so that it does not need to be + ** computed more than once) + ** + ** TODO: Are there other reasons beside (1) to use a co-routine + ** implementation? + */ + if( i==0 + && (pTabList->nSrc==1 + || (pTabList->a[1].fg.jointype&(JT_LEFT|JT_CROSS))!=0) /* (1) */ + ){ + /* Implement a co-routine that will return a single row of the result + ** set on each invocation. + */ + int addrTop = sqlite3VdbeCurrentAddr(v)+1; + + pItem->regReturn = ++pParse->nMem; + sqlite3VdbeAddOp3(v, OP_InitCoroutine, pItem->regReturn, 0, addrTop); + VdbeComment((v, "%s", pItem->pTab->zName)); + pItem->addrFillSub = addrTop; + sqlite3SelectDestInit(&dest, SRT_Coroutine, pItem->regReturn); + ExplainQueryPlan((pParse, 1, "CO-ROUTINE %u", pSub->selId)); + sqlite3Select(pParse, pSub, &dest); + pItem->pTab->nRowLogEst = pSub->nSelectRow; + pItem->fg.viaCoroutine = 1; + pItem->regResult = dest.iSdst; + sqlite3VdbeEndCoroutine(v, pItem->regReturn); + sqlite3VdbeJumpHere(v, addrTop-1); + sqlite3ClearTempRegCache(pParse); + }else{ + /* Generate a subroutine that will fill an ephemeral table with + ** the content of this subquery. pItem->addrFillSub will point + ** to the address of the generated subroutine. pItem->regReturn + ** is a register allocated to hold the subroutine return address + */ + int topAddr; + int onceAddr = 0; + int retAddr; + struct SrcList_item *pPrior; + + testcase( pItem->addrFillSub==0 ); /* Ticket c52b09c7f38903b1311 */ + pItem->regReturn = ++pParse->nMem; + topAddr = sqlite3VdbeAddOp2(v, OP_Integer, 0, pItem->regReturn); + pItem->addrFillSub = topAddr+1; + if( pItem->fg.isCorrelated==0 ){ + /* If the subquery is not correlated and if we are not inside of + ** a trigger, then we only need to compute the value of the subquery + ** once. */ + onceAddr = sqlite3VdbeAddOp0(v, OP_Once); VdbeCoverage(v); + VdbeComment((v, "materialize \"%s\"", pItem->pTab->zName)); + }else{ + VdbeNoopComment((v, "materialize \"%s\"", pItem->pTab->zName)); + } + pPrior = isSelfJoinView(pTabList, pItem); + if( pPrior ){ + sqlite3VdbeAddOp2(v, OP_OpenDup, pItem->iCursor, pPrior->iCursor); + assert( pPrior->pSelect!=0 ); + pSub->nSelectRow = pPrior->pSelect->nSelectRow; + }else{ + sqlite3SelectDestInit(&dest, SRT_EphemTab, pItem->iCursor); + ExplainQueryPlan((pParse, 1, "MATERIALIZE %u", pSub->selId)); + sqlite3Select(pParse, pSub, &dest); + } + pItem->pTab->nRowLogEst = pSub->nSelectRow; + if( onceAddr ) sqlite3VdbeJumpHere(v, onceAddr); + retAddr = sqlite3VdbeAddOp1(v, OP_Return, pItem->regReturn); + VdbeComment((v, "end %s", pItem->pTab->zName)); + sqlite3VdbeChangeP1(v, topAddr, retAddr); + sqlite3ClearTempRegCache(pParse); + } + if( db->mallocFailed ) goto select_end; + pParse->nHeight -= sqlite3SelectExprHeight(p); + pParse->zAuthContext = zSavedAuthContext; +#endif + } + + /* Various elements of the SELECT copied into local variables for + ** convenience */ + pEList = p->pEList; + pWhere = p->pWhere; + pGroupBy = p->pGroupBy; + pHaving = p->pHaving; + sDistinct.isTnct = (p->selFlags & SF_Distinct)!=0; + +#if SELECTTRACE_ENABLED + if( sqlite3SelectTrace & 0x400 ){ + SELECTTRACE(0x400,pParse,p,("After all FROM-clause analysis:\n")); + sqlite3TreeViewSelect(0, p, 0); + } +#endif + + /* If the query is DISTINCT with an ORDER BY but is not an aggregate, and + ** if the select-list is the same as the ORDER BY list, then this query + ** can be rewritten as a GROUP BY. In other words, this: + ** + ** SELECT DISTINCT xyz FROM ... ORDER BY xyz + ** + ** is transformed to: + ** + ** SELECT xyz FROM ... GROUP BY xyz ORDER BY xyz + ** + ** The second form is preferred as a single index (or temp-table) may be + ** used for both the ORDER BY and DISTINCT processing. As originally + ** written the query must use a temp-table for at least one of the ORDER + ** BY and DISTINCT, and an index or separate temp-table for the other. + */ + if( (p->selFlags & (SF_Distinct|SF_Aggregate))==SF_Distinct + && sqlite3ExprListCompare(sSort.pOrderBy, pEList, -1)==0 +#ifndef SQLITE_OMIT_WINDOWFUNC + && ALWAYS(p->pWin==0) +#endif + ){ + p->selFlags &= ~SF_Distinct; + pGroupBy = p->pGroupBy = sqlite3ExprListDup(db, pEList, 0); + p->selFlags |= SF_Aggregate; + /* Notice that even thought SF_Distinct has been cleared from p->selFlags, + ** the sDistinct.isTnct is still set. Hence, isTnct represents the + ** original setting of the SF_Distinct flag, not the current setting */ + assert( sDistinct.isTnct ); + +#if SELECTTRACE_ENABLED + if( sqlite3SelectTrace & 0x400 ){ + SELECTTRACE(0x400,pParse,p,("Transform DISTINCT into GROUP BY:\n")); + sqlite3TreeViewSelect(0, p, 0); + } +#endif + } + + /* If there is an ORDER BY clause, then create an ephemeral index to + ** do the sorting. But this sorting ephemeral index might end up + ** being unused if the data can be extracted in pre-sorted order. + ** If that is the case, then the OP_OpenEphemeral instruction will be + ** changed to an OP_Noop once we figure out that the sorting index is + ** not needed. The sSort.addrSortIndex variable is used to facilitate + ** that change. + */ + if( sSort.pOrderBy ){ + KeyInfo *pKeyInfo; + pKeyInfo = sqlite3KeyInfoFromExprList( + pParse, sSort.pOrderBy, 0, pEList->nExpr); + sSort.iECursor = pParse->nTab++; + sSort.addrSortIndex = + sqlite3VdbeAddOp4(v, OP_OpenEphemeral, + sSort.iECursor, sSort.pOrderBy->nExpr+1+pEList->nExpr, 0, + (char*)pKeyInfo, P4_KEYINFO + ); + }else{ + sSort.addrSortIndex = -1; + } + + /* If the output is destined for a temporary table, open that table. + */ + if( pDest->eDest==SRT_EphemTab ){ + sqlite3VdbeAddOp2(v, OP_OpenEphemeral, pDest->iSDParm, pEList->nExpr); + } + + /* Set the limiter. + */ + iEnd = sqlite3VdbeMakeLabel(pParse); + if( (p->selFlags & SF_FixedLimit)==0 ){ + p->nSelectRow = 320; /* 4 billion rows */ + } + computeLimitRegisters(pParse, p, iEnd); + if( p->iLimit==0 && sSort.addrSortIndex>=0 ){ + sqlite3VdbeChangeOpcode(v, sSort.addrSortIndex, OP_SorterOpen); + sSort.sortFlags |= SORTFLAG_UseSorter; + } + + /* Open an ephemeral index to use for the distinct set. + */ + if( p->selFlags & SF_Distinct ){ + sDistinct.tabTnct = pParse->nTab++; + sDistinct.addrTnct = sqlite3VdbeAddOp4(v, OP_OpenEphemeral, + sDistinct.tabTnct, 0, 0, + (char*)sqlite3KeyInfoFromExprList(pParse, p->pEList,0,0), + P4_KEYINFO); + sqlite3VdbeChangeP5(v, BTREE_UNORDERED); + sDistinct.eTnctType = WHERE_DISTINCT_UNORDERED; + }else{ + sDistinct.eTnctType = WHERE_DISTINCT_NOOP; + } + + if( !isAgg && pGroupBy==0 ){ + /* No aggregate functions and no GROUP BY clause */ + u16 wctrlFlags = (sDistinct.isTnct ? WHERE_WANT_DISTINCT : 0) + | (p->selFlags & SF_FixedLimit); +#ifndef SQLITE_OMIT_WINDOWFUNC + Window *pWin = p->pWin; /* Master window object (or NULL) */ + if( pWin ){ + sqlite3WindowCodeInit(pParse, p); + } +#endif + assert( WHERE_USE_LIMIT==SF_FixedLimit ); + + + /* Begin the database scan. */ + SELECTTRACE(1,pParse,p,("WhereBegin\n")); + pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, sSort.pOrderBy, + p->pEList, wctrlFlags, p->nSelectRow); + if( pWInfo==0 ) goto select_end; + if( sqlite3WhereOutputRowCount(pWInfo) < p->nSelectRow ){ + p->nSelectRow = sqlite3WhereOutputRowCount(pWInfo); + } + if( sDistinct.isTnct && sqlite3WhereIsDistinct(pWInfo) ){ + sDistinct.eTnctType = sqlite3WhereIsDistinct(pWInfo); + } + if( sSort.pOrderBy ){ + sSort.nOBSat = sqlite3WhereIsOrdered(pWInfo); + sSort.labelOBLopt = sqlite3WhereOrderByLimitOptLabel(pWInfo); + if( sSort.nOBSat==sSort.pOrderBy->nExpr ){ + sSort.pOrderBy = 0; + } + } + + /* If sorting index that was created by a prior OP_OpenEphemeral + ** instruction ended up not being needed, then change the OP_OpenEphemeral + ** into an OP_Noop. + */ + if( sSort.addrSortIndex>=0 && sSort.pOrderBy==0 ){ + sqlite3VdbeChangeToNoop(v, sSort.addrSortIndex); + } + + assert( p->pEList==pEList ); +#ifndef SQLITE_OMIT_WINDOWFUNC + if( pWin ){ + int addrGosub = sqlite3VdbeMakeLabel(pParse); + int iCont = sqlite3VdbeMakeLabel(pParse); + int iBreak = sqlite3VdbeMakeLabel(pParse); + int regGosub = ++pParse->nMem; + + sqlite3WindowCodeStep(pParse, p, pWInfo, regGosub, addrGosub); + + sqlite3VdbeAddOp2(v, OP_Goto, 0, iBreak); + sqlite3VdbeResolveLabel(v, addrGosub); + VdbeNoopComment((v, "inner-loop subroutine")); + sSort.labelOBLopt = 0; + selectInnerLoop(pParse, p, -1, &sSort, &sDistinct, pDest, iCont, iBreak); + sqlite3VdbeResolveLabel(v, iCont); + sqlite3VdbeAddOp1(v, OP_Return, regGosub); + VdbeComment((v, "end inner-loop subroutine")); + sqlite3VdbeResolveLabel(v, iBreak); + }else +#endif /* SQLITE_OMIT_WINDOWFUNC */ + { + /* Use the standard inner loop. */ + selectInnerLoop(pParse, p, -1, &sSort, &sDistinct, pDest, + sqlite3WhereContinueLabel(pWInfo), + sqlite3WhereBreakLabel(pWInfo)); + + /* End the database scan loop. + */ + sqlite3WhereEnd(pWInfo); + } + }else{ + /* This case when there exist aggregate functions or a GROUP BY clause + ** or both */ + NameContext sNC; /* Name context for processing aggregate information */ + int iAMem; /* First Mem address for storing current GROUP BY */ + int iBMem; /* First Mem address for previous GROUP BY */ + int iUseFlag; /* Mem address holding flag indicating that at least + ** one row of the input to the aggregator has been + ** processed */ + int iAbortFlag; /* Mem address which causes query abort if positive */ + int groupBySort; /* Rows come from source in GROUP BY order */ + int addrEnd; /* End of processing for this SELECT */ + int sortPTab = 0; /* Pseudotable used to decode sorting results */ + int sortOut = 0; /* Output register from the sorter */ + int orderByGrp = 0; /* True if the GROUP BY and ORDER BY are the same */ + + /* Remove any and all aliases between the result set and the + ** GROUP BY clause. + */ + if( pGroupBy ){ + int k; /* Loop counter */ + struct ExprList_item *pItem; /* For looping over expression in a list */ + + for(k=p->pEList->nExpr, pItem=p->pEList->a; k>0; k--, pItem++){ + pItem->u.x.iAlias = 0; + } + for(k=pGroupBy->nExpr, pItem=pGroupBy->a; k>0; k--, pItem++){ + pItem->u.x.iAlias = 0; + } + assert( 66==sqlite3LogEst(100) ); + if( p->nSelectRow>66 ) p->nSelectRow = 66; + + /* If there is both a GROUP BY and an ORDER BY clause and they are + ** identical, then it may be possible to disable the ORDER BY clause + ** on the grounds that the GROUP BY will cause elements to come out + ** in the correct order. It also may not - the GROUP BY might use a + ** database index that causes rows to be grouped together as required + ** but not actually sorted. Either way, record the fact that the + ** ORDER BY and GROUP BY clauses are the same by setting the orderByGrp + ** variable. */ + if( sSort.pOrderBy && pGroupBy->nExpr==sSort.pOrderBy->nExpr ){ + int ii; + /* The GROUP BY processing doesn't care whether rows are delivered in + ** ASC or DESC order - only that each group is returned contiguously. + ** So set the ASC/DESC flags in the GROUP BY to match those in the + ** ORDER BY to maximize the chances of rows being delivered in an + ** order that makes the ORDER BY redundant. */ + for(ii=0; iinExpr; ii++){ + u8 sortFlags = sSort.pOrderBy->a[ii].sortFlags & KEYINFO_ORDER_DESC; + pGroupBy->a[ii].sortFlags = sortFlags; + } + if( sqlite3ExprListCompare(pGroupBy, sSort.pOrderBy, -1)==0 ){ + orderByGrp = 1; + } + } + }else{ + assert( 0==sqlite3LogEst(1) ); + p->nSelectRow = 0; + } + + /* Create a label to jump to when we want to abort the query */ + addrEnd = sqlite3VdbeMakeLabel(pParse); + + /* Convert TK_COLUMN nodes into TK_AGG_COLUMN and make entries in + ** sAggInfo for all TK_AGG_FUNCTION nodes in expressions of the + ** SELECT statement. + */ + memset(&sNC, 0, sizeof(sNC)); + sNC.pParse = pParse; + sNC.pSrcList = pTabList; + sNC.uNC.pAggInfo = &sAggInfo; + VVA_ONLY( sNC.ncFlags = NC_UAggInfo; ) + sAggInfo.mnReg = pParse->nMem+1; + sAggInfo.nSortingColumn = pGroupBy ? pGroupBy->nExpr : 0; + sAggInfo.pGroupBy = pGroupBy; + sqlite3ExprAnalyzeAggList(&sNC, pEList); + sqlite3ExprAnalyzeAggList(&sNC, sSort.pOrderBy); + if( pHaving ){ + if( pGroupBy ){ + assert( pWhere==p->pWhere ); + assert( pHaving==p->pHaving ); + assert( pGroupBy==p->pGroupBy ); + havingToWhere(pParse, p); + pWhere = p->pWhere; + } + sqlite3ExprAnalyzeAggregates(&sNC, pHaving); + } + sAggInfo.nAccumulator = sAggInfo.nColumn; + if( p->pGroupBy==0 && p->pHaving==0 && sAggInfo.nFunc==1 ){ + minMaxFlag = minMaxQuery(db, sAggInfo.aFunc[0].pExpr, &pMinMaxOrderBy); + }else{ + minMaxFlag = WHERE_ORDERBY_NORMAL; + } + for(i=0; ix.pList); +#ifndef SQLITE_OMIT_WINDOWFUNC + assert( !IsWindowFunc(pExpr) ); + if( ExprHasProperty(pExpr, EP_WinFunc) ){ + sqlite3ExprAnalyzeAggregates(&sNC, pExpr->y.pWin->pFilter); + } +#endif + sNC.ncFlags &= ~NC_InAggFunc; + } + sAggInfo.mxReg = pParse->nMem; + if( db->mallocFailed ) goto select_end; +#if SELECTTRACE_ENABLED + if( sqlite3SelectTrace & 0x400 ){ + int ii; + SELECTTRACE(0x400,pParse,p,("After aggregate analysis %p:\n", &sAggInfo)); + sqlite3TreeViewSelect(0, p, 0); + for(ii=0; iinTab++; + pKeyInfo = sqlite3KeyInfoFromExprList(pParse,pGroupBy,0,sAggInfo.nColumn); + addrSortingIdx = sqlite3VdbeAddOp4(v, OP_SorterOpen, + sAggInfo.sortingIdx, sAggInfo.nSortingColumn, + 0, (char*)pKeyInfo, P4_KEYINFO); + + /* Initialize memory locations used by GROUP BY aggregate processing + */ + iUseFlag = ++pParse->nMem; + iAbortFlag = ++pParse->nMem; + regOutputRow = ++pParse->nMem; + addrOutputRow = sqlite3VdbeMakeLabel(pParse); + regReset = ++pParse->nMem; + addrReset = sqlite3VdbeMakeLabel(pParse); + iAMem = pParse->nMem + 1; + pParse->nMem += pGroupBy->nExpr; + iBMem = pParse->nMem + 1; + pParse->nMem += pGroupBy->nExpr; + sqlite3VdbeAddOp2(v, OP_Integer, 0, iAbortFlag); + VdbeComment((v, "clear abort flag")); + sqlite3VdbeAddOp3(v, OP_Null, 0, iAMem, iAMem+pGroupBy->nExpr-1); + + /* Begin a loop that will extract all source rows in GROUP BY order. + ** This might involve two separate loops with an OP_Sort in between, or + ** it might be a single loop that uses an index to extract information + ** in the right order to begin with. + */ + sqlite3VdbeAddOp2(v, OP_Gosub, regReset, addrReset); + SELECTTRACE(1,pParse,p,("WhereBegin\n")); + pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, pGroupBy, 0, + WHERE_GROUPBY | (orderByGrp ? WHERE_SORTBYGROUP : 0), 0 + ); + if( pWInfo==0 ) goto select_end; + if( sqlite3WhereIsOrdered(pWInfo)==pGroupBy->nExpr ){ + /* The optimizer is able to deliver rows in group by order so + ** we do not have to sort. The OP_OpenEphemeral table will be + ** cancelled later because we still need to use the pKeyInfo + */ + groupBySort = 0; + }else{ + /* Rows are coming out in undetermined order. We have to push + ** each row into a sorting index, terminate the first loop, + ** then loop over the sorting index in order to get the output + ** in sorted order + */ + int regBase; + int regRecord; + int nCol; + int nGroupBy; + + explainTempTable(pParse, + (sDistinct.isTnct && (p->selFlags&SF_Distinct)==0) ? + "DISTINCT" : "GROUP BY"); + + groupBySort = 1; + nGroupBy = pGroupBy->nExpr; + nCol = nGroupBy; + j = nGroupBy; + for(i=0; i=j ){ + nCol++; + j++; + } + } + regBase = sqlite3GetTempRange(pParse, nCol); + sqlite3ExprCodeExprList(pParse, pGroupBy, regBase, 0, 0); + j = nGroupBy; + for(i=0; iiSorterColumn>=j ){ + int r1 = j + regBase; + sqlite3ExprCodeGetColumnOfTable(v, + pCol->pTab, pCol->iTable, pCol->iColumn, r1); + j++; + } + } + regRecord = sqlite3GetTempReg(pParse); + sqlite3VdbeAddOp3(v, OP_MakeRecord, regBase, nCol, regRecord); + sqlite3VdbeAddOp2(v, OP_SorterInsert, sAggInfo.sortingIdx, regRecord); + sqlite3ReleaseTempReg(pParse, regRecord); + sqlite3ReleaseTempRange(pParse, regBase, nCol); + sqlite3WhereEnd(pWInfo); + sAggInfo.sortingIdxPTab = sortPTab = pParse->nTab++; + sortOut = sqlite3GetTempReg(pParse); + sqlite3VdbeAddOp3(v, OP_OpenPseudo, sortPTab, sortOut, nCol); + sqlite3VdbeAddOp2(v, OP_SorterSort, sAggInfo.sortingIdx, addrEnd); + VdbeComment((v, "GROUP BY sort")); VdbeCoverage(v); + sAggInfo.useSortingIdx = 1; + } + + /* If the index or temporary table used by the GROUP BY sort + ** will naturally deliver rows in the order required by the ORDER BY + ** clause, cancel the ephemeral table open coded earlier. + ** + ** This is an optimization - the correct answer should result regardless. + ** Use the SQLITE_GroupByOrder flag with SQLITE_TESTCTRL_OPTIMIZER to + ** disable this optimization for testing purposes. */ + if( orderByGrp && OptimizationEnabled(db, SQLITE_GroupByOrder) + && (groupBySort || sqlite3WhereIsSorted(pWInfo)) + ){ + sSort.pOrderBy = 0; + sqlite3VdbeChangeToNoop(v, sSort.addrSortIndex); + } + + /* Evaluate the current GROUP BY terms and store in b0, b1, b2... + ** (b0 is memory location iBMem+0, b1 is iBMem+1, and so forth) + ** Then compare the current GROUP BY terms against the GROUP BY terms + ** from the previous row currently stored in a0, a1, a2... + */ + addrTopOfLoop = sqlite3VdbeCurrentAddr(v); + if( groupBySort ){ + sqlite3VdbeAddOp3(v, OP_SorterData, sAggInfo.sortingIdx, + sortOut, sortPTab); + } + for(j=0; jnExpr; j++){ + if( groupBySort ){ + sqlite3VdbeAddOp3(v, OP_Column, sortPTab, j, iBMem+j); + }else{ + sAggInfo.directMode = 1; + sqlite3ExprCode(pParse, pGroupBy->a[j].pExpr, iBMem+j); + } + } + sqlite3VdbeAddOp4(v, OP_Compare, iAMem, iBMem, pGroupBy->nExpr, + (char*)sqlite3KeyInfoRef(pKeyInfo), P4_KEYINFO); + addr1 = sqlite3VdbeCurrentAddr(v); + sqlite3VdbeAddOp3(v, OP_Jump, addr1+1, 0, addr1+1); VdbeCoverage(v); + + /* Generate code that runs whenever the GROUP BY changes. + ** Changes in the GROUP BY are detected by the previous code + ** block. If there were no changes, this block is skipped. + ** + ** This code copies current group by terms in b0,b1,b2,... + ** over to a0,a1,a2. It then calls the output subroutine + ** and resets the aggregate accumulator registers in preparation + ** for the next GROUP BY batch. + */ + sqlite3ExprCodeMove(pParse, iBMem, iAMem, pGroupBy->nExpr); + sqlite3VdbeAddOp2(v, OP_Gosub, regOutputRow, addrOutputRow); + VdbeComment((v, "output one row")); + sqlite3VdbeAddOp2(v, OP_IfPos, iAbortFlag, addrEnd); VdbeCoverage(v); + VdbeComment((v, "check abort flag")); + sqlite3VdbeAddOp2(v, OP_Gosub, regReset, addrReset); + VdbeComment((v, "reset accumulator")); + + /* Update the aggregate accumulators based on the content of + ** the current row + */ + sqlite3VdbeJumpHere(v, addr1); + updateAccumulator(pParse, iUseFlag, &sAggInfo); + sqlite3VdbeAddOp2(v, OP_Integer, 1, iUseFlag); + VdbeComment((v, "indicate data in accumulator")); + + /* End of the loop + */ + if( groupBySort ){ + sqlite3VdbeAddOp2(v, OP_SorterNext, sAggInfo.sortingIdx, addrTopOfLoop); + VdbeCoverage(v); + }else{ + sqlite3WhereEnd(pWInfo); + sqlite3VdbeChangeToNoop(v, addrSortingIdx); + } + + /* Output the final row of result + */ + sqlite3VdbeAddOp2(v, OP_Gosub, regOutputRow, addrOutputRow); + VdbeComment((v, "output final row")); + + /* Jump over the subroutines + */ + sqlite3VdbeGoto(v, addrEnd); + + /* Generate a subroutine that outputs a single row of the result + ** set. This subroutine first looks at the iUseFlag. If iUseFlag + ** is less than or equal to zero, the subroutine is a no-op. If + ** the processing calls for the query to abort, this subroutine + ** increments the iAbortFlag memory location before returning in + ** order to signal the caller to abort. + */ + addrSetAbort = sqlite3VdbeCurrentAddr(v); + sqlite3VdbeAddOp2(v, OP_Integer, 1, iAbortFlag); + VdbeComment((v, "set abort flag")); + sqlite3VdbeAddOp1(v, OP_Return, regOutputRow); + sqlite3VdbeResolveLabel(v, addrOutputRow); + addrOutputRow = sqlite3VdbeCurrentAddr(v); + sqlite3VdbeAddOp2(v, OP_IfPos, iUseFlag, addrOutputRow+2); + VdbeCoverage(v); + VdbeComment((v, "Groupby result generator entry point")); + sqlite3VdbeAddOp1(v, OP_Return, regOutputRow); + finalizeAggFunctions(pParse, &sAggInfo); + sqlite3ExprIfFalse(pParse, pHaving, addrOutputRow+1, SQLITE_JUMPIFNULL); + selectInnerLoop(pParse, p, -1, &sSort, + &sDistinct, pDest, + addrOutputRow+1, addrSetAbort); + sqlite3VdbeAddOp1(v, OP_Return, regOutputRow); + VdbeComment((v, "end groupby result generator")); + + /* Generate a subroutine that will reset the group-by accumulator + */ + sqlite3VdbeResolveLabel(v, addrReset); + resetAccumulator(pParse, &sAggInfo); + sqlite3VdbeAddOp2(v, OP_Integer, 0, iUseFlag); + VdbeComment((v, "indicate accumulator empty")); + sqlite3VdbeAddOp1(v, OP_Return, regReset); + + } /* endif pGroupBy. Begin aggregate queries without GROUP BY: */ + else { + Table *pTab; + if( (pTab = isSimpleCount(p, &sAggInfo))!=0 ){ + /* If isSimpleCount() returns a pointer to a Table structure, then + ** the SQL statement is of the form: + ** + ** SELECT count(*) FROM + ** + ** where the Table structure returned represents table . + ** + ** This statement is so common that it is optimized specially. The + ** OP_Count instruction is executed either on the intkey table that + ** contains the data for table or on one of its indexes. It + ** is better to execute the op on an index, as indexes are almost + ** always spread across less pages than their corresponding tables. + */ + const int iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema); + const int iCsr = pParse->nTab++; /* Cursor to scan b-tree */ + Index *pIdx; /* Iterator variable */ + KeyInfo *pKeyInfo = 0; /* Keyinfo for scanned index */ + Index *pBest = 0; /* Best index found so far */ + int iRoot = pTab->tnum; /* Root page of scanned b-tree */ + + sqlite3CodeVerifySchema(pParse, iDb); + sqlite3TableLock(pParse, iDb, pTab->tnum, 0, pTab->zName); + + /* Search for the index that has the lowest scan cost. + ** + ** (2011-04-15) Do not do a full scan of an unordered index. + ** + ** (2013-10-03) Do not count the entries in a partial index. + ** + ** In practice the KeyInfo structure will not be used. It is only + ** passed to keep OP_OpenRead happy. + */ + if( !HasRowid(pTab) ) pBest = sqlite3PrimaryKeyIndex(pTab); + if( !p->pSrc->a[0].fg.notIndexed ){ + for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ + if( pIdx->bUnordered==0 + && pIdx->szIdxRowszTabRow + && pIdx->pPartIdxWhere==0 + && (!pBest || pIdx->szIdxRowszIdxRow) + ){ + pBest = pIdx; + } + } + } + if( pBest ){ + iRoot = pBest->tnum; + pKeyInfo = sqlite3KeyInfoOfIndex(pParse, pBest); + } + + /* Open a read-only cursor, execute the OP_Count, close the cursor. */ + sqlite3VdbeAddOp4Int(v, OP_OpenRead, iCsr, iRoot, iDb, 1); + if( pKeyInfo ){ + sqlite3VdbeChangeP4(v, -1, (char *)pKeyInfo, P4_KEYINFO); + } + sqlite3VdbeAddOp2(v, OP_Count, iCsr, sAggInfo.aFunc[0].iMem); + sqlite3VdbeAddOp1(v, OP_Close, iCsr); + explainSimpleCount(pParse, pTab, pBest); + }else{ + int regAcc = 0; /* "populate accumulators" flag */ + + /* If there are accumulator registers but no min() or max() functions + ** without FILTER clauses, allocate register regAcc. Register regAcc + ** will contain 0 the first time the inner loop runs, and 1 thereafter. + ** The code generated by updateAccumulator() uses this to ensure + ** that the accumulator registers are (a) updated only once if + ** there are no min() or max functions or (b) always updated for the + ** first row visited by the aggregate, so that they are updated at + ** least once even if the FILTER clause means the min() or max() + ** function visits zero rows. */ + if( sAggInfo.nAccumulator ){ + for(i=0; ifuncFlags&SQLITE_FUNC_NEEDCOLL ) break; + } + if( i==sAggInfo.nFunc ){ + regAcc = ++pParse->nMem; + sqlite3VdbeAddOp2(v, OP_Integer, 0, regAcc); + } + } + + /* This case runs if the aggregate has no GROUP BY clause. The + ** processing is much simpler since there is only a single row + ** of output. + */ + assert( p->pGroupBy==0 ); + resetAccumulator(pParse, &sAggInfo); + + /* If this query is a candidate for the min/max optimization, then + ** minMaxFlag will have been previously set to either + ** WHERE_ORDERBY_MIN or WHERE_ORDERBY_MAX and pMinMaxOrderBy will + ** be an appropriate ORDER BY expression for the optimization. + */ + assert( minMaxFlag==WHERE_ORDERBY_NORMAL || pMinMaxOrderBy!=0 ); + assert( pMinMaxOrderBy==0 || pMinMaxOrderBy->nExpr==1 ); + + SELECTTRACE(1,pParse,p,("WhereBegin\n")); + pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, pMinMaxOrderBy, + 0, minMaxFlag, 0); + if( pWInfo==0 ){ + goto select_end; + } + updateAccumulator(pParse, regAcc, &sAggInfo); + if( regAcc ) sqlite3VdbeAddOp2(v, OP_Integer, 1, regAcc); + if( sqlite3WhereIsOrdered(pWInfo)>0 ){ + sqlite3VdbeGoto(v, sqlite3WhereBreakLabel(pWInfo)); + VdbeComment((v, "%s() by index", + (minMaxFlag==WHERE_ORDERBY_MIN?"min":"max"))); + } + sqlite3WhereEnd(pWInfo); + finalizeAggFunctions(pParse, &sAggInfo); + } + + sSort.pOrderBy = 0; + sqlite3ExprIfFalse(pParse, pHaving, addrEnd, SQLITE_JUMPIFNULL); + selectInnerLoop(pParse, p, -1, 0, 0, + pDest, addrEnd, addrEnd); + } + sqlite3VdbeResolveLabel(v, addrEnd); + + } /* endif aggregate query */ + + if( sDistinct.eTnctType==WHERE_DISTINCT_UNORDERED ){ + explainTempTable(pParse, "DISTINCT"); + } + + /* If there is an ORDER BY clause, then we need to sort the results + ** and send them to the callback one by one. + */ + if( sSort.pOrderBy ){ + explainTempTable(pParse, + sSort.nOBSat>0 ? "RIGHT PART OF ORDER BY":"ORDER BY"); + assert( p->pEList==pEList ); + generateSortTail(pParse, p, &sSort, pEList->nExpr, pDest); + } + + /* Jump here to skip this query + */ + sqlite3VdbeResolveLabel(v, iEnd); + + /* The SELECT has been coded. If there is an error in the Parse structure, + ** set the return code to 1. Otherwise 0. */ + rc = (pParse->nErr>0); + + /* Control jumps to here if an error is encountered above, or upon + ** successful coding of the SELECT. + */ +select_end: + sqlite3ExprListDelete(db, pMinMaxOrderBy); + sqlite3DbFree(db, sAggInfo.aCol); +#ifdef SQLITE_DEBUG + for(i=0; ipAggInfo==&sAggInfo ); + sAggInfo.aFunc[i].pExpr->pAggInfo = 0; + } + sAggInfo.iAggMagic = 0; +#endif + sqlite3DbFree(db, sAggInfo.aFunc); +#if SELECTTRACE_ENABLED + SELECTTRACE(0x1,pParse,p,("end processing\n")); + if( (sqlite3SelectTrace & 0x2000)!=0 && ExplainQueryPlanParent(pParse)==0 ){ + sqlite3TreeViewSelect(0, p, 0); + } +#endif + ExplainQueryPlanPop(pParse); + return rc; +} diff -Npur sqlite-version-3.32.2/src/sqliteInt.h sqlite-version-3.32.2-patched/src/sqliteInt.h --- sqlite-version-3.32.2/src/sqliteInt.h 2020-06-04 20:58:43.000000000 +0800 +++ sqlite-version-3.32.2-patched/src/sqliteInt.h 2020-07-08 10:00:50.899152517 +0800 @@ -976,7 +976,12 @@ typedef INT16_TYPE LogEst; */ #if defined(SQLITE_ENABLE_SELECTTRACE) # define SELECTTRACE_ENABLED 1 +# define SELECTTRACE(K,P,S,X) \ + if(sqlite3SelectTrace&(K)) \ + sqlite3DebugPrintf("%u/%d/%p: ",(S)->selId,(P)->addrExplain,(S)),\ + sqlite3DebugPrintf X #else +# define SELECTTRACE(K,P,S,X) # define SELECTTRACE_ENABLED 0 #endif @@ -2523,9 +2528,24 @@ struct AggInfo { int iDistinct; /* Ephemeral table used to enforce DISTINCT */ } *aFunc; int nFunc; /* Number of entries in aFunc[] */ +#ifdef SQLITE_DEBUG + u32 iAggMagic; /* Sanity checking constant */ +#endif }; /* +** Allowed values for AggInfo.iAggMagic +*/ +#define SQLITE_AGGMAGIC_VALID 0x05cadade + +/* +** True if the AggInfo object is valid. Used inside of assert() only. +*/ +#ifdef SQLITE_DEBUG +# define AggInfoValid(P) ((P)->iAggMagic==SQLITE_AGGMAGIC_VALID) +#endif + +/* ** The datatype ynVar is a signed integer, either 16-bit or 32-bit. ** Usually it is 16-bits. But if SQLITE_MAX_VARIABLE_NUMBER is greater ** than 32767 we have to make it 32-bit. 16-bit is preferred because @@ -3105,6 +3125,7 @@ struct Select { #define SF_WhereBegin 0x0080000 /* Really a WhereBegin() call. Debug Only */ #define SF_WinRewrite 0x0100000 /* Window function rewrite accomplished */ #define SF_View 0x0200000 /* SELECT statement is a view */ +#define SF_NoopOrderBy 0x0400000 /* ORDER BY is ignored for this query */ /* ** The results of a SELECT can be distributed in several ways, as defined @@ -4546,10 +4567,11 @@ extern const unsigned char sqlite3UpperT extern const unsigned char sqlite3CtypeMap[]; extern SQLITE_WSD struct Sqlite3Config sqlite3Config; extern FuncDefHash sqlite3BuiltinFunctions; +extern u32 sqlite3SelectTrace; #ifndef SQLITE_OMIT_WSD extern int sqlite3PendingByte; #endif -#endif +#endif /* !defined(SQLITE_AMALGAMATION) */ #ifdef VDBE_PROFILE extern sqlite3_uint64 sqlite3NProfileCnt; #endif diff -Npur sqlite-version-3.32.2/src/sqliteInt.h.orig sqlite-version-3.32.2-patched/src/sqliteInt.h.orig --- sqlite-version-3.32.2/src/sqliteInt.h.orig 1970-01-01 08:00:00.000000000 +0800 +++ sqlite-version-3.32.2-patched/src/sqliteInt.h.orig 2020-07-08 10:00:47.367088648 +0800 @@ -0,0 +1,4977 @@ +/* +** 2001 September 15 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +************************************************************************* +** Internal interface definitions for SQLite. +** +*/ +#ifndef SQLITEINT_H +#define SQLITEINT_H + +/* Special Comments: +** +** Some comments have special meaning to the tools that measure test +** coverage: +** +** NO_TEST - The branches on this line are not +** measured by branch coverage. This is +** used on lines of code that actually +** implement parts of coverage testing. +** +** OPTIMIZATION-IF-TRUE - This branch is allowed to alway be false +** and the correct answer is still obtained, +** though perhaps more slowly. +** +** OPTIMIZATION-IF-FALSE - This branch is allowed to alway be true +** and the correct answer is still obtained, +** though perhaps more slowly. +** +** PREVENTS-HARMLESS-OVERREAD - This branch prevents a buffer overread +** that would be harmless and undetectable +** if it did occur. +** +** In all cases, the special comment must be enclosed in the usual +** slash-asterisk...asterisk-slash comment marks, with no spaces between the +** asterisks and the comment text. +*/ + +/* +** Make sure the Tcl calling convention macro is defined. This macro is +** only used by test code and Tcl integration code. +*/ +#ifndef SQLITE_TCLAPI +# define SQLITE_TCLAPI +#endif + +/* +** Include the header file used to customize the compiler options for MSVC. +** This should be done first so that it can successfully prevent spurious +** compiler warnings due to subsequent content in this file and other files +** that are included by this file. +*/ +#include "msvc.h" + +/* +** Special setup for VxWorks +*/ +#include "vxworks.h" + +/* +** These #defines should enable >2GB file support on POSIX if the +** underlying operating system supports it. If the OS lacks +** large file support, or if the OS is windows, these should be no-ops. +** +** Ticket #2739: The _LARGEFILE_SOURCE macro must appear before any +** system #includes. Hence, this block of code must be the very first +** code in all source files. +** +** Large file support can be disabled using the -DSQLITE_DISABLE_LFS switch +** on the compiler command line. This is necessary if you are compiling +** on a recent machine (ex: Red Hat 7.2) but you want your code to work +** on an older machine (ex: Red Hat 6.0). If you compile on Red Hat 7.2 +** without this option, LFS is enable. But LFS does not exist in the kernel +** in Red Hat 6.0, so the code won't work. Hence, for maximum binary +** portability you should omit LFS. +** +** The previous paragraph was written in 2005. (This paragraph is written +** on 2008-11-28.) These days, all Linux kernels support large files, so +** you should probably leave LFS enabled. But some embedded platforms might +** lack LFS in which case the SQLITE_DISABLE_LFS macro might still be useful. +** +** Similar is true for Mac OS X. LFS is only supported on Mac OS X 9 and later. +*/ +#ifndef SQLITE_DISABLE_LFS +# define _LARGE_FILE 1 +# ifndef _FILE_OFFSET_BITS +# define _FILE_OFFSET_BITS 64 +# endif +# define _LARGEFILE_SOURCE 1 +#endif + +/* The GCC_VERSION and MSVC_VERSION macros are used to +** conditionally include optimizations for each of these compilers. A +** value of 0 means that compiler is not being used. The +** SQLITE_DISABLE_INTRINSIC macro means do not use any compiler-specific +** optimizations, and hence set all compiler macros to 0 +** +** There was once also a CLANG_VERSION macro. However, we learn that the +** version numbers in clang are for "marketing" only and are inconsistent +** and unreliable. Fortunately, all versions of clang also recognize the +** gcc version numbers and have reasonable settings for gcc version numbers, +** so the GCC_VERSION macro will be set to a correct non-zero value even +** when compiling with clang. +*/ +#if defined(__GNUC__) && !defined(SQLITE_DISABLE_INTRINSIC) +# define GCC_VERSION (__GNUC__*1000000+__GNUC_MINOR__*1000+__GNUC_PATCHLEVEL__) +#else +# define GCC_VERSION 0 +#endif +#if defined(_MSC_VER) && !defined(SQLITE_DISABLE_INTRINSIC) +# define MSVC_VERSION _MSC_VER +#else +# define MSVC_VERSION 0 +#endif + +/* Needed for various definitions... */ +#if defined(__GNUC__) && !defined(_GNU_SOURCE) +# define _GNU_SOURCE +#endif + +#if defined(__OpenBSD__) && !defined(_BSD_SOURCE) +# define _BSD_SOURCE +#endif + +/* +** For MinGW, check to see if we can include the header file containing its +** version information, among other things. Normally, this internal MinGW +** header file would [only] be included automatically by other MinGW header +** files; however, the contained version information is now required by this +** header file to work around binary compatibility issues (see below) and +** this is the only known way to reliably obtain it. This entire #if block +** would be completely unnecessary if there was any other way of detecting +** MinGW via their preprocessor (e.g. if they customized their GCC to define +** some MinGW-specific macros). When compiling for MinGW, either the +** _HAVE_MINGW_H or _HAVE__MINGW_H (note the extra underscore) macro must be +** defined; otherwise, detection of conditions specific to MinGW will be +** disabled. +*/ +#if defined(_HAVE_MINGW_H) +# include "mingw.h" +#elif defined(_HAVE__MINGW_H) +# include "_mingw.h" +#endif + +/* +** For MinGW version 4.x (and higher), check to see if the _USE_32BIT_TIME_T +** define is required to maintain binary compatibility with the MSVC runtime +** library in use (e.g. for Windows XP). +*/ +#if !defined(_USE_32BIT_TIME_T) && !defined(_USE_64BIT_TIME_T) && \ + defined(_WIN32) && !defined(_WIN64) && \ + defined(__MINGW_MAJOR_VERSION) && __MINGW_MAJOR_VERSION >= 4 && \ + defined(__MSVCRT__) +# define _USE_32BIT_TIME_T +#endif + +/* The public SQLite interface. The _FILE_OFFSET_BITS macro must appear +** first in QNX. Also, the _USE_32BIT_TIME_T macro must appear first for +** MinGW. +*/ +#include "sqlite3.h" + +/* +** Include the configuration header output by 'configure' if we're using the +** autoconf-based build +*/ +#if defined(_HAVE_SQLITE_CONFIG_H) && !defined(SQLITECONFIG_H) +#include "config.h" +#define SQLITECONFIG_H 1 +#endif + +#include "sqliteLimit.h" + +/* Disable nuisance warnings on Borland compilers */ +#if defined(__BORLANDC__) +#pragma warn -rch /* unreachable code */ +#pragma warn -ccc /* Condition is always true or false */ +#pragma warn -aus /* Assigned value is never used */ +#pragma warn -csu /* Comparing signed and unsigned */ +#pragma warn -spa /* Suspicious pointer arithmetic */ +#endif + +/* +** WAL mode depends on atomic aligned 32-bit loads and stores in a few +** places. The following macros try to make this explicit. +*/ +#ifndef __has_feature +# define __has_feature(x) 0 /* compatibility with non-clang compilers */ +#endif +#if GCC_VERSION>=4007000 || __has_feature(c_atomic) +# define AtomicLoad(PTR) __atomic_load_n((PTR),__ATOMIC_RELAXED) +# define AtomicStore(PTR,VAL) __atomic_store_n((PTR),(VAL),__ATOMIC_RELAXED) +#else +# define AtomicLoad(PTR) (*(PTR)) +# define AtomicStore(PTR,VAL) (*(PTR) = (VAL)) +#endif + +/* +** Include standard header files as necessary +*/ +#ifdef HAVE_STDINT_H +#include +#endif +#ifdef HAVE_INTTYPES_H +#include +#endif + +/* +** The following macros are used to cast pointers to integers and +** integers to pointers. The way you do this varies from one compiler +** to the next, so we have developed the following set of #if statements +** to generate appropriate macros for a wide range of compilers. +** +** The correct "ANSI" way to do this is to use the intptr_t type. +** Unfortunately, that typedef is not available on all compilers, or +** if it is available, it requires an #include of specific headers +** that vary from one machine to the next. +** +** Ticket #3860: The llvm-gcc-4.2 compiler from Apple chokes on +** the ((void*)&((char*)0)[X]) construct. But MSVC chokes on ((void*)(X)). +** So we have to define the macros in different ways depending on the +** compiler. +*/ +#if defined(HAVE_STDINT_H) /* Use this case if we have ANSI headers */ +# define SQLITE_INT_TO_PTR(X) ((void*)(intptr_t)(X)) +# define SQLITE_PTR_TO_INT(X) ((int)(intptr_t)(X)) +#elif defined(__PTRDIFF_TYPE__) /* This case should work for GCC */ +# define SQLITE_INT_TO_PTR(X) ((void*)(__PTRDIFF_TYPE__)(X)) +# define SQLITE_PTR_TO_INT(X) ((int)(__PTRDIFF_TYPE__)(X)) +#elif !defined(__GNUC__) /* Works for compilers other than LLVM */ +# define SQLITE_INT_TO_PTR(X) ((void*)&((char*)0)[X]) +# define SQLITE_PTR_TO_INT(X) ((int)(((char*)X)-(char*)0)) +#else /* Generates a warning - but it always works */ +# define SQLITE_INT_TO_PTR(X) ((void*)(X)) +# define SQLITE_PTR_TO_INT(X) ((int)(X)) +#endif + +/* +** A macro to hint to the compiler that a function should not be +** inlined. +*/ +#if defined(__GNUC__) +# define SQLITE_NOINLINE __attribute__((noinline)) +#elif defined(_MSC_VER) && _MSC_VER>=1310 +# define SQLITE_NOINLINE __declspec(noinline) +#else +# define SQLITE_NOINLINE +#endif + +/* +** Make sure that the compiler intrinsics we desire are enabled when +** compiling with an appropriate version of MSVC unless prevented by +** the SQLITE_DISABLE_INTRINSIC define. +*/ +#if !defined(SQLITE_DISABLE_INTRINSIC) +# if defined(_MSC_VER) && _MSC_VER>=1400 +# if !defined(_WIN32_WCE) +# include +# pragma intrinsic(_byteswap_ushort) +# pragma intrinsic(_byteswap_ulong) +# pragma intrinsic(_byteswap_uint64) +# pragma intrinsic(_ReadWriteBarrier) +# else +# include +# endif +# endif +#endif + +/* +** The SQLITE_THREADSAFE macro must be defined as 0, 1, or 2. +** 0 means mutexes are permanently disable and the library is never +** threadsafe. 1 means the library is serialized which is the highest +** level of threadsafety. 2 means the library is multithreaded - multiple +** threads can use SQLite as long as no two threads try to use the same +** database connection at the same time. +** +** Older versions of SQLite used an optional THREADSAFE macro. +** We support that for legacy. +** +** To ensure that the correct value of "THREADSAFE" is reported when querying +** for compile-time options at runtime (e.g. "PRAGMA compile_options"), this +** logic is partially replicated in ctime.c. If it is updated here, it should +** also be updated there. +*/ +#if !defined(SQLITE_THREADSAFE) +# if defined(THREADSAFE) +# define SQLITE_THREADSAFE THREADSAFE +# else +# define SQLITE_THREADSAFE 1 /* IMP: R-07272-22309 */ +# endif +#endif + +/* +** Powersafe overwrite is on by default. But can be turned off using +** the -DSQLITE_POWERSAFE_OVERWRITE=0 command-line option. +*/ +#ifndef SQLITE_POWERSAFE_OVERWRITE +# define SQLITE_POWERSAFE_OVERWRITE 1 +#endif + +/* +** EVIDENCE-OF: R-25715-37072 Memory allocation statistics are enabled by +** default unless SQLite is compiled with SQLITE_DEFAULT_MEMSTATUS=0 in +** which case memory allocation statistics are disabled by default. +*/ +#if !defined(SQLITE_DEFAULT_MEMSTATUS) +# define SQLITE_DEFAULT_MEMSTATUS 1 +#endif + +/* +** Exactly one of the following macros must be defined in order to +** specify which memory allocation subsystem to use. +** +** SQLITE_SYSTEM_MALLOC // Use normal system malloc() +** SQLITE_WIN32_MALLOC // Use Win32 native heap API +** SQLITE_ZERO_MALLOC // Use a stub allocator that always fails +** SQLITE_MEMDEBUG // Debugging version of system malloc() +** +** On Windows, if the SQLITE_WIN32_MALLOC_VALIDATE macro is defined and the +** assert() macro is enabled, each call into the Win32 native heap subsystem +** will cause HeapValidate to be called. If heap validation should fail, an +** assertion will be triggered. +** +** If none of the above are defined, then set SQLITE_SYSTEM_MALLOC as +** the default. +*/ +#if defined(SQLITE_SYSTEM_MALLOC) \ + + defined(SQLITE_WIN32_MALLOC) \ + + defined(SQLITE_ZERO_MALLOC) \ + + defined(SQLITE_MEMDEBUG)>1 +# error "Two or more of the following compile-time configuration options\ + are defined but at most one is allowed:\ + SQLITE_SYSTEM_MALLOC, SQLITE_WIN32_MALLOC, SQLITE_MEMDEBUG,\ + SQLITE_ZERO_MALLOC" +#endif +#if defined(SQLITE_SYSTEM_MALLOC) \ + + defined(SQLITE_WIN32_MALLOC) \ + + defined(SQLITE_ZERO_MALLOC) \ + + defined(SQLITE_MEMDEBUG)==0 +# define SQLITE_SYSTEM_MALLOC 1 +#endif + +/* +** If SQLITE_MALLOC_SOFT_LIMIT is not zero, then try to keep the +** sizes of memory allocations below this value where possible. +*/ +#if !defined(SQLITE_MALLOC_SOFT_LIMIT) +# define SQLITE_MALLOC_SOFT_LIMIT 1024 +#endif + +/* +** We need to define _XOPEN_SOURCE as follows in order to enable +** recursive mutexes on most Unix systems and fchmod() on OpenBSD. +** But _XOPEN_SOURCE define causes problems for Mac OS X, so omit +** it. +*/ +#if !defined(_XOPEN_SOURCE) && !defined(__DARWIN__) && !defined(__APPLE__) +# define _XOPEN_SOURCE 600 +#endif + +/* +** NDEBUG and SQLITE_DEBUG are opposites. It should always be true that +** defined(NDEBUG)==!defined(SQLITE_DEBUG). If this is not currently true, +** make it true by defining or undefining NDEBUG. +** +** Setting NDEBUG makes the code smaller and faster by disabling the +** assert() statements in the code. So we want the default action +** to be for NDEBUG to be set and NDEBUG to be undefined only if SQLITE_DEBUG +** is set. Thus NDEBUG becomes an opt-in rather than an opt-out +** feature. +*/ +#if !defined(NDEBUG) && !defined(SQLITE_DEBUG) +# define NDEBUG 1 +#endif +#if defined(NDEBUG) && defined(SQLITE_DEBUG) +# undef NDEBUG +#endif + +/* +** Enable SQLITE_ENABLE_EXPLAIN_COMMENTS if SQLITE_DEBUG is turned on. +*/ +#if !defined(SQLITE_ENABLE_EXPLAIN_COMMENTS) && defined(SQLITE_DEBUG) +# define SQLITE_ENABLE_EXPLAIN_COMMENTS 1 +#endif + +/* +** The testcase() macro is used to aid in coverage testing. When +** doing coverage testing, the condition inside the argument to +** testcase() must be evaluated both true and false in order to +** get full branch coverage. The testcase() macro is inserted +** to help ensure adequate test coverage in places where simple +** condition/decision coverage is inadequate. For example, testcase() +** can be used to make sure boundary values are tested. For +** bitmask tests, testcase() can be used to make sure each bit +** is significant and used at least once. On switch statements +** where multiple cases go to the same block of code, testcase() +** can insure that all cases are evaluated. +** +*/ +#ifdef SQLITE_COVERAGE_TEST + void sqlite3Coverage(int); +# define testcase(X) if( X ){ sqlite3Coverage(__LINE__); } +#else +# define testcase(X) +#endif + +/* +** The TESTONLY macro is used to enclose variable declarations or +** other bits of code that are needed to support the arguments +** within testcase() and assert() macros. +*/ +#if !defined(NDEBUG) || defined(SQLITE_COVERAGE_TEST) +# define TESTONLY(X) X +#else +# define TESTONLY(X) +#endif + +/* +** Sometimes we need a small amount of code such as a variable initialization +** to setup for a later assert() statement. We do not want this code to +** appear when assert() is disabled. The following macro is therefore +** used to contain that setup code. The "VVA" acronym stands for +** "Verification, Validation, and Accreditation". In other words, the +** code within VVA_ONLY() will only run during verification processes. +*/ +#ifndef NDEBUG +# define VVA_ONLY(X) X +#else +# define VVA_ONLY(X) +#endif + +/* +** The ALWAYS and NEVER macros surround boolean expressions which +** are intended to always be true or false, respectively. Such +** expressions could be omitted from the code completely. But they +** are included in a few cases in order to enhance the resilience +** of SQLite to unexpected behavior - to make the code "self-healing" +** or "ductile" rather than being "brittle" and crashing at the first +** hint of unplanned behavior. +** +** In other words, ALWAYS and NEVER are added for defensive code. +** +** When doing coverage testing ALWAYS and NEVER are hard-coded to +** be true and false so that the unreachable code they specify will +** not be counted as untested code. +*/ +#if defined(SQLITE_COVERAGE_TEST) || defined(SQLITE_MUTATION_TEST) +# define ALWAYS(X) (1) +# define NEVER(X) (0) +#elif !defined(NDEBUG) +# define ALWAYS(X) ((X)?1:(assert(0),0)) +# define NEVER(X) ((X)?(assert(0),1):0) +#else +# define ALWAYS(X) (X) +# define NEVER(X) (X) +#endif + +/* +** The harmless(X) macro indicates that expression X is usually false +** but can be true without causing any problems, but we don't know of +** any way to cause X to be true. +** +** In debugging and testing builds, this macro will abort if X is ever +** true. In this way, developers are alerted to a possible test case +** that causes X to be true. If a harmless macro ever fails, that is +** an opportunity to change the macro into a testcase() and add a new +** test case to the test suite. +** +** For normal production builds, harmless(X) is a no-op, since it does +** not matter whether expression X is true or false. +*/ +#ifdef SQLITE_DEBUG +# define harmless(X) assert(!(X)); +#else +# define harmless(X) +#endif + +/* +** Some conditionals are optimizations only. In other words, if the +** conditionals are replaced with a constant 1 (true) or 0 (false) then +** the correct answer is still obtained, though perhaps not as quickly. +** +** The following macros mark these optimizations conditionals. +*/ +#if defined(SQLITE_MUTATION_TEST) +# define OK_IF_ALWAYS_TRUE(X) (1) +# define OK_IF_ALWAYS_FALSE(X) (0) +#else +# define OK_IF_ALWAYS_TRUE(X) (X) +# define OK_IF_ALWAYS_FALSE(X) (X) +#endif + +/* +** Some malloc failures are only possible if SQLITE_TEST_REALLOC_STRESS is +** defined. We need to defend against those failures when testing with +** SQLITE_TEST_REALLOC_STRESS, but we don't want the unreachable branches +** during a normal build. The following macro can be used to disable tests +** that are always false except when SQLITE_TEST_REALLOC_STRESS is set. +*/ +#if defined(SQLITE_TEST_REALLOC_STRESS) +# define ONLY_IF_REALLOC_STRESS(X) (X) +#elif !defined(NDEBUG) +# define ONLY_IF_REALLOC_STRESS(X) ((X)?(assert(0),1):0) +#else +# define ONLY_IF_REALLOC_STRESS(X) (0) +#endif + +/* +** Declarations used for tracing the operating system interfaces. +*/ +#if defined(SQLITE_FORCE_OS_TRACE) || defined(SQLITE_TEST) || \ + (defined(SQLITE_DEBUG) && SQLITE_OS_WIN) + extern int sqlite3OSTrace; +# define OSTRACE(X) if( sqlite3OSTrace ) sqlite3DebugPrintf X +# define SQLITE_HAVE_OS_TRACE +#else +# define OSTRACE(X) +# undef SQLITE_HAVE_OS_TRACE +#endif + +/* +** Is the sqlite3ErrName() function needed in the build? Currently, +** it is needed by "mutex_w32.c" (when debugging), "os_win.c" (when +** OSTRACE is enabled), and by several "test*.c" files (which are +** compiled using SQLITE_TEST). +*/ +#if defined(SQLITE_HAVE_OS_TRACE) || defined(SQLITE_TEST) || \ + (defined(SQLITE_DEBUG) && SQLITE_OS_WIN) +# define SQLITE_NEED_ERR_NAME +#else +# undef SQLITE_NEED_ERR_NAME +#endif + +/* +** SQLITE_ENABLE_EXPLAIN_COMMENTS is incompatible with SQLITE_OMIT_EXPLAIN +*/ +#ifdef SQLITE_OMIT_EXPLAIN +# undef SQLITE_ENABLE_EXPLAIN_COMMENTS +#endif + +/* +** Return true (non-zero) if the input is an integer that is too large +** to fit in 32-bits. This macro is used inside of various testcase() +** macros to verify that we have tested SQLite for large-file support. +*/ +#define IS_BIG_INT(X) (((X)&~(i64)0xffffffff)!=0) + +/* +** The macro unlikely() is a hint that surrounds a boolean +** expression that is usually false. Macro likely() surrounds +** a boolean expression that is usually true. These hints could, +** in theory, be used by the compiler to generate better code, but +** currently they are just comments for human readers. +*/ +#define likely(X) (X) +#define unlikely(X) (X) + +#include "hash.h" +#include "parse.h" +#include +#include +#include +#include +#include + +/* +** Use a macro to replace memcpy() if compiled with SQLITE_INLINE_MEMCPY. +** This allows better measurements of where memcpy() is used when running +** cachegrind. But this macro version of memcpy() is very slow so it +** should not be used in production. This is a performance measurement +** hack only. +*/ +#ifdef SQLITE_INLINE_MEMCPY +# define memcpy(D,S,N) {char*xxd=(char*)(D);const char*xxs=(const char*)(S);\ + int xxn=(N);while(xxn-->0)*(xxd++)=*(xxs++);} +#endif + +/* +** If compiling for a processor that lacks floating point support, +** substitute integer for floating-point +*/ +#ifdef SQLITE_OMIT_FLOATING_POINT +# define double sqlite_int64 +# define float sqlite_int64 +# define LONGDOUBLE_TYPE sqlite_int64 +# ifndef SQLITE_BIG_DBL +# define SQLITE_BIG_DBL (((sqlite3_int64)1)<<50) +# endif +# define SQLITE_OMIT_DATETIME_FUNCS 1 +# define SQLITE_OMIT_TRACE 1 +# undef SQLITE_MIXED_ENDIAN_64BIT_FLOAT +# undef SQLITE_HAVE_ISNAN +#endif +#ifndef SQLITE_BIG_DBL +# define SQLITE_BIG_DBL (1e99) +#endif + +/* +** OMIT_TEMPDB is set to 1 if SQLITE_OMIT_TEMPDB is defined, or 0 +** afterward. Having this macro allows us to cause the C compiler +** to omit code used by TEMP tables without messy #ifndef statements. +*/ +#ifdef SQLITE_OMIT_TEMPDB +#define OMIT_TEMPDB 1 +#else +#define OMIT_TEMPDB 0 +#endif + +/* +** The "file format" number is an integer that is incremented whenever +** the VDBE-level file format changes. The following macros define the +** the default file format for new databases and the maximum file format +** that the library can read. +*/ +#define SQLITE_MAX_FILE_FORMAT 4 +#ifndef SQLITE_DEFAULT_FILE_FORMAT +# define SQLITE_DEFAULT_FILE_FORMAT 4 +#endif + +/* +** Determine whether triggers are recursive by default. This can be +** changed at run-time using a pragma. +*/ +#ifndef SQLITE_DEFAULT_RECURSIVE_TRIGGERS +# define SQLITE_DEFAULT_RECURSIVE_TRIGGERS 0 +#endif + +/* +** Provide a default value for SQLITE_TEMP_STORE in case it is not specified +** on the command-line +*/ +#ifndef SQLITE_TEMP_STORE +# define SQLITE_TEMP_STORE 1 +#endif + +/* +** If no value has been provided for SQLITE_MAX_WORKER_THREADS, or if +** SQLITE_TEMP_STORE is set to 3 (never use temporary files), set it +** to zero. +*/ +#if SQLITE_TEMP_STORE==3 || SQLITE_THREADSAFE==0 +# undef SQLITE_MAX_WORKER_THREADS +# define SQLITE_MAX_WORKER_THREADS 0 +#endif +#ifndef SQLITE_MAX_WORKER_THREADS +# define SQLITE_MAX_WORKER_THREADS 8 +#endif +#ifndef SQLITE_DEFAULT_WORKER_THREADS +# define SQLITE_DEFAULT_WORKER_THREADS 0 +#endif +#if SQLITE_DEFAULT_WORKER_THREADS>SQLITE_MAX_WORKER_THREADS +# undef SQLITE_MAX_WORKER_THREADS +# define SQLITE_MAX_WORKER_THREADS SQLITE_DEFAULT_WORKER_THREADS +#endif + +/* +** The default initial allocation for the pagecache when using separate +** pagecaches for each database connection. A positive number is the +** number of pages. A negative number N translations means that a buffer +** of -1024*N bytes is allocated and used for as many pages as it will hold. +** +** The default value of "20" was choosen to minimize the run-time of the +** speedtest1 test program with options: --shrink-memory --reprepare +*/ +#ifndef SQLITE_DEFAULT_PCACHE_INITSZ +# define SQLITE_DEFAULT_PCACHE_INITSZ 20 +#endif + +/* +** Default value for the SQLITE_CONFIG_SORTERREF_SIZE option. +*/ +#ifndef SQLITE_DEFAULT_SORTERREF_SIZE +# define SQLITE_DEFAULT_SORTERREF_SIZE 0x7fffffff +#endif + +/* +** The compile-time options SQLITE_MMAP_READWRITE and +** SQLITE_ENABLE_BATCH_ATOMIC_WRITE are not compatible with one another. +** You must choose one or the other (or neither) but not both. +*/ +#if defined(SQLITE_MMAP_READWRITE) && defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE) +#error Cannot use both SQLITE_MMAP_READWRITE and SQLITE_ENABLE_BATCH_ATOMIC_WRITE +#endif + +/* +** GCC does not define the offsetof() macro so we'll have to do it +** ourselves. +*/ +#ifndef offsetof +#define offsetof(STRUCTURE,FIELD) ((int)((char*)&((STRUCTURE*)0)->FIELD)) +#endif + +/* +** Macros to compute minimum and maximum of two numbers. +*/ +#ifndef MIN +# define MIN(A,B) ((A)<(B)?(A):(B)) +#endif +#ifndef MAX +# define MAX(A,B) ((A)>(B)?(A):(B)) +#endif + +/* +** Swap two objects of type TYPE. +*/ +#define SWAP(TYPE,A,B) {TYPE t=A; A=B; B=t;} + +/* +** Check to see if this machine uses EBCDIC. (Yes, believe it or +** not, there are still machines out there that use EBCDIC.) +*/ +#if 'A' == '\301' +# define SQLITE_EBCDIC 1 +#else +# define SQLITE_ASCII 1 +#endif + +/* +** Integers of known sizes. These typedefs might change for architectures +** where the sizes very. Preprocessor macros are available so that the +** types can be conveniently redefined at compile-type. Like this: +** +** cc '-DUINTPTR_TYPE=long long int' ... +*/ +#ifndef UINT32_TYPE +# ifdef HAVE_UINT32_T +# define UINT32_TYPE uint32_t +# else +# define UINT32_TYPE unsigned int +# endif +#endif +#ifndef UINT16_TYPE +# ifdef HAVE_UINT16_T +# define UINT16_TYPE uint16_t +# else +# define UINT16_TYPE unsigned short int +# endif +#endif +#ifndef INT16_TYPE +# ifdef HAVE_INT16_T +# define INT16_TYPE int16_t +# else +# define INT16_TYPE short int +# endif +#endif +#ifndef UINT8_TYPE +# ifdef HAVE_UINT8_T +# define UINT8_TYPE uint8_t +# else +# define UINT8_TYPE unsigned char +# endif +#endif +#ifndef INT8_TYPE +# ifdef HAVE_INT8_T +# define INT8_TYPE int8_t +# else +# define INT8_TYPE signed char +# endif +#endif +#ifndef LONGDOUBLE_TYPE +# define LONGDOUBLE_TYPE long double +#endif +typedef sqlite_int64 i64; /* 8-byte signed integer */ +typedef sqlite_uint64 u64; /* 8-byte unsigned integer */ +typedef UINT32_TYPE u32; /* 4-byte unsigned integer */ +typedef UINT16_TYPE u16; /* 2-byte unsigned integer */ +typedef INT16_TYPE i16; /* 2-byte signed integer */ +typedef UINT8_TYPE u8; /* 1-byte unsigned integer */ +typedef INT8_TYPE i8; /* 1-byte signed integer */ + +/* +** SQLITE_MAX_U32 is a u64 constant that is the maximum u64 value +** that can be stored in a u32 without loss of data. The value +** is 0x00000000ffffffff. But because of quirks of some compilers, we +** have to specify the value in the less intuitive manner shown: +*/ +#define SQLITE_MAX_U32 ((((u64)1)<<32)-1) + +/* +** The datatype used to store estimates of the number of rows in a +** table or index. This is an unsigned integer type. For 99.9% of +** the world, a 32-bit integer is sufficient. But a 64-bit integer +** can be used at compile-time if desired. +*/ +#ifdef SQLITE_64BIT_STATS + typedef u64 tRowcnt; /* 64-bit only if requested at compile-time */ +#else + typedef u32 tRowcnt; /* 32-bit is the default */ +#endif + +/* +** Estimated quantities used for query planning are stored as 16-bit +** logarithms. For quantity X, the value stored is 10*log2(X). This +** gives a possible range of values of approximately 1.0e986 to 1e-986. +** But the allowed values are "grainy". Not every value is representable. +** For example, quantities 16 and 17 are both represented by a LogEst +** of 40. However, since LogEst quantities are suppose to be estimates, +** not exact values, this imprecision is not a problem. +** +** "LogEst" is short for "Logarithmic Estimate". +** +** Examples: +** 1 -> 0 20 -> 43 10000 -> 132 +** 2 -> 10 25 -> 46 25000 -> 146 +** 3 -> 16 100 -> 66 1000000 -> 199 +** 4 -> 20 1000 -> 99 1048576 -> 200 +** 10 -> 33 1024 -> 100 4294967296 -> 320 +** +** The LogEst can be negative to indicate fractional values. +** Examples: +** +** 0.5 -> -10 0.1 -> -33 0.0625 -> -40 +*/ +typedef INT16_TYPE LogEst; + +/* +** Set the SQLITE_PTRSIZE macro to the number of bytes in a pointer +*/ +#ifndef SQLITE_PTRSIZE +# if defined(__SIZEOF_POINTER__) +# define SQLITE_PTRSIZE __SIZEOF_POINTER__ +# elif defined(i386) || defined(__i386__) || defined(_M_IX86) || \ + defined(_M_ARM) || defined(__arm__) || defined(__x86) || \ + (defined(__TOS_AIX__) && !defined(__64BIT__)) +# define SQLITE_PTRSIZE 4 +# else +# define SQLITE_PTRSIZE 8 +# endif +#endif + +/* The uptr type is an unsigned integer large enough to hold a pointer +*/ +#if defined(HAVE_STDINT_H) + typedef uintptr_t uptr; +#elif SQLITE_PTRSIZE==4 + typedef u32 uptr; +#else + typedef u64 uptr; +#endif + +/* +** The SQLITE_WITHIN(P,S,E) macro checks to see if pointer P points to +** something between S (inclusive) and E (exclusive). +** +** In other words, S is a buffer and E is a pointer to the first byte after +** the end of buffer S. This macro returns true if P points to something +** contained within the buffer S. +*/ +#define SQLITE_WITHIN(P,S,E) (((uptr)(P)>=(uptr)(S))&&((uptr)(P)<(uptr)(E))) + + +/* +** Macros to determine whether the machine is big or little endian, +** and whether or not that determination is run-time or compile-time. +** +** For best performance, an attempt is made to guess at the byte-order +** using C-preprocessor macros. If that is unsuccessful, or if +** -DSQLITE_BYTEORDER=0 is set, then byte-order is determined +** at run-time. +*/ +#ifndef SQLITE_BYTEORDER +# if defined(i386) || defined(__i386__) || defined(_M_IX86) || \ + defined(__x86_64) || defined(__x86_64__) || defined(_M_X64) || \ + defined(_M_AMD64) || defined(_M_ARM) || defined(__x86) || \ + defined(__ARMEL__) || defined(__AARCH64EL__) || defined(_M_ARM64) +# define SQLITE_BYTEORDER 1234 +# elif defined(sparc) || defined(__ppc__) || \ + defined(__ARMEB__) || defined(__AARCH64EB__) +# define SQLITE_BYTEORDER 4321 +# else +# define SQLITE_BYTEORDER 0 +# endif +#endif +#if SQLITE_BYTEORDER==4321 +# define SQLITE_BIGENDIAN 1 +# define SQLITE_LITTLEENDIAN 0 +# define SQLITE_UTF16NATIVE SQLITE_UTF16BE +#elif SQLITE_BYTEORDER==1234 +# define SQLITE_BIGENDIAN 0 +# define SQLITE_LITTLEENDIAN 1 +# define SQLITE_UTF16NATIVE SQLITE_UTF16LE +#else +# ifdef SQLITE_AMALGAMATION + const int sqlite3one = 1; +# else + extern const int sqlite3one; +# endif +# define SQLITE_BIGENDIAN (*(char *)(&sqlite3one)==0) +# define SQLITE_LITTLEENDIAN (*(char *)(&sqlite3one)==1) +# define SQLITE_UTF16NATIVE (SQLITE_BIGENDIAN?SQLITE_UTF16BE:SQLITE_UTF16LE) +#endif + +/* +** Constants for the largest and smallest possible 64-bit signed integers. +** These macros are designed to work correctly on both 32-bit and 64-bit +** compilers. +*/ +#define LARGEST_INT64 (0xffffffff|(((i64)0x7fffffff)<<32)) +#define SMALLEST_INT64 (((i64)-1) - LARGEST_INT64) + +/* +** Round up a number to the next larger multiple of 8. This is used +** to force 8-byte alignment on 64-bit architectures. +*/ +#define ROUND8(x) (((x)+7)&~7) + +/* +** Round down to the nearest multiple of 8 +*/ +#define ROUNDDOWN8(x) ((x)&~7) + +/* +** Assert that the pointer X is aligned to an 8-byte boundary. This +** macro is used only within assert() to verify that the code gets +** all alignment restrictions correct. +** +** Except, if SQLITE_4_BYTE_ALIGNED_MALLOC is defined, then the +** underlying malloc() implementation might return us 4-byte aligned +** pointers. In that case, only verify 4-byte alignment. +*/ +#ifdef SQLITE_4_BYTE_ALIGNED_MALLOC +# define EIGHT_BYTE_ALIGNMENT(X) ((((char*)(X) - (char*)0)&3)==0) +#else +# define EIGHT_BYTE_ALIGNMENT(X) ((((char*)(X) - (char*)0)&7)==0) +#endif + +/* +** Disable MMAP on platforms where it is known to not work +*/ +#if defined(__OpenBSD__) || defined(__QNXNTO__) +# undef SQLITE_MAX_MMAP_SIZE +# define SQLITE_MAX_MMAP_SIZE 0 +#endif + +/* +** Default maximum size of memory used by memory-mapped I/O in the VFS +*/ +#ifdef __APPLE__ +# include +#endif +#ifndef SQLITE_MAX_MMAP_SIZE +# if defined(__linux__) \ + || defined(_WIN32) \ + || (defined(__APPLE__) && defined(__MACH__)) \ + || defined(__sun) \ + || defined(__FreeBSD__) \ + || defined(__DragonFly__) +# define SQLITE_MAX_MMAP_SIZE 0x7fff0000 /* 2147418112 */ +# else +# define SQLITE_MAX_MMAP_SIZE 0 +# endif +#endif + +/* +** The default MMAP_SIZE is zero on all platforms. Or, even if a larger +** default MMAP_SIZE is specified at compile-time, make sure that it does +** not exceed the maximum mmap size. +*/ +#ifndef SQLITE_DEFAULT_MMAP_SIZE +# define SQLITE_DEFAULT_MMAP_SIZE 0 +#endif +#if SQLITE_DEFAULT_MMAP_SIZE>SQLITE_MAX_MMAP_SIZE +# undef SQLITE_DEFAULT_MMAP_SIZE +# define SQLITE_DEFAULT_MMAP_SIZE SQLITE_MAX_MMAP_SIZE +#endif + +/* +** SELECTTRACE_ENABLED will be either 1 or 0 depending on whether or not +** the Select query generator tracing logic is turned on. +*/ +#if defined(SQLITE_ENABLE_SELECTTRACE) +# define SELECTTRACE_ENABLED 1 +# define SELECTTRACE(K,P,S,X) \ + if(sqlite3SelectTrace&(K)) \ + sqlite3DebugPrintf("%u/%d/%p: ",(S)->selId,(P)->addrExplain,(S)),\ + sqlite3DebugPrintf X +#else +# define SELECTTRACE(K,P,S,X) +# define SELECTTRACE_ENABLED 0 +#endif + +/* +** An instance of the following structure is used to store the busy-handler +** callback for a given sqlite handle. +** +** The sqlite.busyHandler member of the sqlite struct contains the busy +** callback for the database handle. Each pager opened via the sqlite +** handle is passed a pointer to sqlite.busyHandler. The busy-handler +** callback is currently invoked only from within pager.c. +*/ +typedef struct BusyHandler BusyHandler; +struct BusyHandler { + int (*xBusyHandler)(void *,int); /* The busy callback */ + void *pBusyArg; /* First arg to busy callback */ + int nBusy; /* Incremented with each busy call */ +}; + +/* +** Name of the master database table. The master database table +** is a special table that holds the names and attributes of all +** user tables and indices. +*/ +#define MASTER_NAME "sqlite_master" +#define TEMP_MASTER_NAME "sqlite_temp_master" + +/* +** The root-page of the master database table. +*/ +#define MASTER_ROOT 1 + +/* +** The name of the schema table. +*/ +#define SCHEMA_TABLE(x) ((!OMIT_TEMPDB)&&(x==1)?TEMP_MASTER_NAME:MASTER_NAME) + +/* +** A convenience macro that returns the number of elements in +** an array. +*/ +#define ArraySize(X) ((int)(sizeof(X)/sizeof(X[0]))) + +/* +** Determine if the argument is a power of two +*/ +#define IsPowerOfTwo(X) (((X)&((X)-1))==0) + +/* +** The following value as a destructor means to use sqlite3DbFree(). +** The sqlite3DbFree() routine requires two parameters instead of the +** one parameter that destructors normally want. So we have to introduce +** this magic value that the code knows to handle differently. Any +** pointer will work here as long as it is distinct from SQLITE_STATIC +** and SQLITE_TRANSIENT. +*/ +#define SQLITE_DYNAMIC ((sqlite3_destructor_type)sqlite3MallocSize) + +/* +** When SQLITE_OMIT_WSD is defined, it means that the target platform does +** not support Writable Static Data (WSD) such as global and static variables. +** All variables must either be on the stack or dynamically allocated from +** the heap. When WSD is unsupported, the variable declarations scattered +** throughout the SQLite code must become constants instead. The SQLITE_WSD +** macro is used for this purpose. And instead of referencing the variable +** directly, we use its constant as a key to lookup the run-time allocated +** buffer that holds real variable. The constant is also the initializer +** for the run-time allocated buffer. +** +** In the usual case where WSD is supported, the SQLITE_WSD and GLOBAL +** macros become no-ops and have zero performance impact. +*/ +#ifdef SQLITE_OMIT_WSD + #define SQLITE_WSD const + #define GLOBAL(t,v) (*(t*)sqlite3_wsd_find((void*)&(v), sizeof(v))) + #define sqlite3GlobalConfig GLOBAL(struct Sqlite3Config, sqlite3Config) + int sqlite3_wsd_init(int N, int J); + void *sqlite3_wsd_find(void *K, int L); +#else + #define SQLITE_WSD + #define GLOBAL(t,v) v + #define sqlite3GlobalConfig sqlite3Config +#endif + +/* +** The following macros are used to suppress compiler warnings and to +** make it clear to human readers when a function parameter is deliberately +** left unused within the body of a function. This usually happens when +** a function is called via a function pointer. For example the +** implementation of an SQL aggregate step callback may not use the +** parameter indicating the number of arguments passed to the aggregate, +** if it knows that this is enforced elsewhere. +** +** When a function parameter is not used at all within the body of a function, +** it is generally named "NotUsed" or "NotUsed2" to make things even clearer. +** However, these macros may also be used to suppress warnings related to +** parameters that may or may not be used depending on compilation options. +** For example those parameters only used in assert() statements. In these +** cases the parameters are named as per the usual conventions. +*/ +#define UNUSED_PARAMETER(x) (void)(x) +#define UNUSED_PARAMETER2(x,y) UNUSED_PARAMETER(x),UNUSED_PARAMETER(y) + +/* +** Forward references to structures +*/ +typedef struct AggInfo AggInfo; +typedef struct AuthContext AuthContext; +typedef struct AutoincInfo AutoincInfo; +typedef struct Bitvec Bitvec; +typedef struct CollSeq CollSeq; +typedef struct Column Column; +typedef struct Db Db; +typedef struct Schema Schema; +typedef struct Expr Expr; +typedef struct ExprList ExprList; +typedef struct FKey FKey; +typedef struct FuncDestructor FuncDestructor; +typedef struct FuncDef FuncDef; +typedef struct FuncDefHash FuncDefHash; +typedef struct IdList IdList; +typedef struct Index Index; +typedef struct IndexSample IndexSample; +typedef struct KeyClass KeyClass; +typedef struct KeyInfo KeyInfo; +typedef struct Lookaside Lookaside; +typedef struct LookasideSlot LookasideSlot; +typedef struct Module Module; +typedef struct NameContext NameContext; +typedef struct Parse Parse; +typedef struct PreUpdate PreUpdate; +typedef struct PrintfArguments PrintfArguments; +typedef struct RenameToken RenameToken; +typedef struct RowSet RowSet; +typedef struct Savepoint Savepoint; +typedef struct Select Select; +typedef struct SQLiteThread SQLiteThread; +typedef struct SelectDest SelectDest; +typedef struct SrcList SrcList; +typedef struct sqlite3_str StrAccum; /* Internal alias for sqlite3_str */ +typedef struct Table Table; +typedef struct TableLock TableLock; +typedef struct Token Token; +typedef struct TreeView TreeView; +typedef struct Trigger Trigger; +typedef struct TriggerPrg TriggerPrg; +typedef struct TriggerStep TriggerStep; +typedef struct UnpackedRecord UnpackedRecord; +typedef struct Upsert Upsert; +typedef struct VTable VTable; +typedef struct VtabCtx VtabCtx; +typedef struct Walker Walker; +typedef struct WhereInfo WhereInfo; +typedef struct Window Window; +typedef struct With With; + + +/* +** The bitmask datatype defined below is used for various optimizations. +** +** Changing this from a 64-bit to a 32-bit type limits the number of +** tables in a join to 32 instead of 64. But it also reduces the size +** of the library by 738 bytes on ix86. +*/ +#ifdef SQLITE_BITMASK_TYPE + typedef SQLITE_BITMASK_TYPE Bitmask; +#else + typedef u64 Bitmask; +#endif + +/* +** The number of bits in a Bitmask. "BMS" means "BitMask Size". +*/ +#define BMS ((int)(sizeof(Bitmask)*8)) + +/* +** A bit in a Bitmask +*/ +#define MASKBIT(n) (((Bitmask)1)<<(n)) +#define MASKBIT64(n) (((u64)1)<<(n)) +#define MASKBIT32(n) (((unsigned int)1)<<(n)) +#define ALLBITS ((Bitmask)-1) + +/* A VList object records a mapping between parameters/variables/wildcards +** in the SQL statement (such as $abc, @pqr, or :xyz) and the integer +** variable number associated with that parameter. See the format description +** on the sqlite3VListAdd() routine for more information. A VList is really +** just an array of integers. +*/ +typedef int VList; + +/* +** Defer sourcing vdbe.h and btree.h until after the "u8" and +** "BusyHandler" typedefs. vdbe.h also requires a few of the opaque +** pointer types (i.e. FuncDef) defined above. +*/ +#include "btree.h" +#include "vdbe.h" +#include "pager.h" +#include "pcache.h" +#include "os.h" +#include "mutex.h" + +/* The SQLITE_EXTRA_DURABLE compile-time option used to set the default +** synchronous setting to EXTRA. It is no longer supported. +*/ +#ifdef SQLITE_EXTRA_DURABLE +# warning Use SQLITE_DEFAULT_SYNCHRONOUS=3 instead of SQLITE_EXTRA_DURABLE +# define SQLITE_DEFAULT_SYNCHRONOUS 3 +#endif + +/* +** Default synchronous levels. +** +** Note that (for historcal reasons) the PAGER_SYNCHRONOUS_* macros differ +** from the SQLITE_DEFAULT_SYNCHRONOUS value by 1. +** +** PAGER_SYNCHRONOUS DEFAULT_SYNCHRONOUS +** OFF 1 0 +** NORMAL 2 1 +** FULL 3 2 +** EXTRA 4 3 +** +** The "PRAGMA synchronous" statement also uses the zero-based numbers. +** In other words, the zero-based numbers are used for all external interfaces +** and the one-based values are used internally. +*/ +#ifndef SQLITE_DEFAULT_SYNCHRONOUS +# define SQLITE_DEFAULT_SYNCHRONOUS 2 +#endif +#ifndef SQLITE_DEFAULT_WAL_SYNCHRONOUS +# define SQLITE_DEFAULT_WAL_SYNCHRONOUS SQLITE_DEFAULT_SYNCHRONOUS +#endif + +/* +** Each database file to be accessed by the system is an instance +** of the following structure. There are normally two of these structures +** in the sqlite.aDb[] array. aDb[0] is the main database file and +** aDb[1] is the database file used to hold temporary tables. Additional +** databases may be attached. +*/ +struct Db { + char *zDbSName; /* Name of this database. (schema name, not filename) */ + Btree *pBt; /* The B*Tree structure for this database file */ + u8 safety_level; /* How aggressive at syncing data to disk */ + u8 bSyncSet; /* True if "PRAGMA synchronous=N" has been run */ + Schema *pSchema; /* Pointer to database schema (possibly shared) */ +}; + +/* +** An instance of the following structure stores a database schema. +** +** Most Schema objects are associated with a Btree. The exception is +** the Schema for the TEMP databaes (sqlite3.aDb[1]) which is free-standing. +** In shared cache mode, a single Schema object can be shared by multiple +** Btrees that refer to the same underlying BtShared object. +** +** Schema objects are automatically deallocated when the last Btree that +** references them is destroyed. The TEMP Schema is manually freed by +** sqlite3_close(). +* +** A thread must be holding a mutex on the corresponding Btree in order +** to access Schema content. This implies that the thread must also be +** holding a mutex on the sqlite3 connection pointer that owns the Btree. +** For a TEMP Schema, only the connection mutex is required. +*/ +struct Schema { + int schema_cookie; /* Database schema version number for this file */ + int iGeneration; /* Generation counter. Incremented with each change */ + Hash tblHash; /* All tables indexed by name */ + Hash idxHash; /* All (named) indices indexed by name */ + Hash trigHash; /* All triggers indexed by name */ + Hash fkeyHash; /* All foreign keys by referenced table name */ + Table *pSeqTab; /* The sqlite_sequence table used by AUTOINCREMENT */ + u8 file_format; /* Schema format version for this file */ + u8 enc; /* Text encoding used by this database */ + u16 schemaFlags; /* Flags associated with this schema */ + int cache_size; /* Number of pages to use in the cache */ +}; + +/* +** These macros can be used to test, set, or clear bits in the +** Db.pSchema->flags field. +*/ +#define DbHasProperty(D,I,P) (((D)->aDb[I].pSchema->schemaFlags&(P))==(P)) +#define DbHasAnyProperty(D,I,P) (((D)->aDb[I].pSchema->schemaFlags&(P))!=0) +#define DbSetProperty(D,I,P) (D)->aDb[I].pSchema->schemaFlags|=(P) +#define DbClearProperty(D,I,P) (D)->aDb[I].pSchema->schemaFlags&=~(P) + +/* +** Allowed values for the DB.pSchema->flags field. +** +** The DB_SchemaLoaded flag is set after the database schema has been +** read into internal hash tables. +** +** DB_UnresetViews means that one or more views have column names that +** have been filled out. If the schema changes, these column names might +** changes and so the view will need to be reset. +*/ +#define DB_SchemaLoaded 0x0001 /* The schema has been loaded */ +#define DB_UnresetViews 0x0002 /* Some views have defined column names */ +#define DB_ResetWanted 0x0008 /* Reset the schema when nSchemaLock==0 */ + +/* +** The number of different kinds of things that can be limited +** using the sqlite3_limit() interface. +*/ +#define SQLITE_N_LIMIT (SQLITE_LIMIT_WORKER_THREADS+1) + +/* +** Lookaside malloc is a set of fixed-size buffers that can be used +** to satisfy small transient memory allocation requests for objects +** associated with a particular database connection. The use of +** lookaside malloc provides a significant performance enhancement +** (approx 10%) by avoiding numerous malloc/free requests while parsing +** SQL statements. +** +** The Lookaside structure holds configuration information about the +** lookaside malloc subsystem. Each available memory allocation in +** the lookaside subsystem is stored on a linked list of LookasideSlot +** objects. +** +** Lookaside allocations are only allowed for objects that are associated +** with a particular database connection. Hence, schema information cannot +** be stored in lookaside because in shared cache mode the schema information +** is shared by multiple database connections. Therefore, while parsing +** schema information, the Lookaside.bEnabled flag is cleared so that +** lookaside allocations are not used to construct the schema objects. +** +** New lookaside allocations are only allowed if bDisable==0. When +** bDisable is greater than zero, sz is set to zero which effectively +** disables lookaside without adding a new test for the bDisable flag +** in a performance-critical path. sz should be set by to szTrue whenever +** bDisable changes back to zero. +** +** Lookaside buffers are initially held on the pInit list. As they are +** used and freed, they are added back to the pFree list. New allocations +** come off of pFree first, then pInit as a fallback. This dual-list +** allows use to compute a high-water mark - the maximum number of allocations +** outstanding at any point in the past - by subtracting the number of +** allocations on the pInit list from the total number of allocations. +** +** Enhancement on 2019-12-12: Two-size-lookaside +** The default lookaside configuration is 100 slots of 1200 bytes each. +** The larger slot sizes are important for performance, but they waste +** a lot of space, as most lookaside allocations are less than 128 bytes. +** The two-size-lookaside enhancement breaks up the lookaside allocation +** into two pools: One of 128-byte slots and the other of the default size +** (1200-byte) slots. Allocations are filled from the small-pool first, +** failing over to the full-size pool if that does not work. Thus more +** lookaside slots are available while also using less memory. +** This enhancement can be omitted by compiling with +** SQLITE_OMIT_TWOSIZE_LOOKASIDE. +*/ +struct Lookaside { + u32 bDisable; /* Only operate the lookaside when zero */ + u16 sz; /* Size of each buffer in bytes */ + u16 szTrue; /* True value of sz, even if disabled */ + u8 bMalloced; /* True if pStart obtained from sqlite3_malloc() */ + u32 nSlot; /* Number of lookaside slots allocated */ + u32 anStat[3]; /* 0: hits. 1: size misses. 2: full misses */ + LookasideSlot *pInit; /* List of buffers not previously used */ + LookasideSlot *pFree; /* List of available buffers */ +#ifndef SQLITE_OMIT_TWOSIZE_LOOKASIDE + LookasideSlot *pSmallInit; /* List of small buffers not prediously used */ + LookasideSlot *pSmallFree; /* List of available small buffers */ + void *pMiddle; /* First byte past end of full-size buffers and + ** the first byte of LOOKASIDE_SMALL buffers */ +#endif /* SQLITE_OMIT_TWOSIZE_LOOKASIDE */ + void *pStart; /* First byte of available memory space */ + void *pEnd; /* First byte past end of available space */ +}; +struct LookasideSlot { + LookasideSlot *pNext; /* Next buffer in the list of free buffers */ +}; + +#define DisableLookaside db->lookaside.bDisable++;db->lookaside.sz=0 +#define EnableLookaside db->lookaside.bDisable--;\ + db->lookaside.sz=db->lookaside.bDisable?0:db->lookaside.szTrue + +/* Size of the smaller allocations in two-size lookside */ +#ifdef SQLITE_OMIT_TWOSIZE_LOOKASIDE +# define LOOKASIDE_SMALL 0 +#else +# define LOOKASIDE_SMALL 128 +#endif + +/* +** A hash table for built-in function definitions. (Application-defined +** functions use a regular table table from hash.h.) +** +** Hash each FuncDef structure into one of the FuncDefHash.a[] slots. +** Collisions are on the FuncDef.u.pHash chain. Use the SQLITE_FUNC_HASH() +** macro to compute a hash on the function name. +*/ +#define SQLITE_FUNC_HASH_SZ 23 +struct FuncDefHash { + FuncDef *a[SQLITE_FUNC_HASH_SZ]; /* Hash table for functions */ +}; +#define SQLITE_FUNC_HASH(C,L) (((C)+(L))%SQLITE_FUNC_HASH_SZ) + +#ifdef SQLITE_USER_AUTHENTICATION +/* +** Information held in the "sqlite3" database connection object and used +** to manage user authentication. +*/ +typedef struct sqlite3_userauth sqlite3_userauth; +struct sqlite3_userauth { + u8 authLevel; /* Current authentication level */ + int nAuthPW; /* Size of the zAuthPW in bytes */ + char *zAuthPW; /* Password used to authenticate */ + char *zAuthUser; /* User name used to authenticate */ +}; + +/* Allowed values for sqlite3_userauth.authLevel */ +#define UAUTH_Unknown 0 /* Authentication not yet checked */ +#define UAUTH_Fail 1 /* User authentication failed */ +#define UAUTH_User 2 /* Authenticated as a normal user */ +#define UAUTH_Admin 3 /* Authenticated as an administrator */ + +/* Functions used only by user authorization logic */ +int sqlite3UserAuthTable(const char*); +int sqlite3UserAuthCheckLogin(sqlite3*,const char*,u8*); +void sqlite3UserAuthInit(sqlite3*); +void sqlite3CryptFunc(sqlite3_context*,int,sqlite3_value**); + +#endif /* SQLITE_USER_AUTHENTICATION */ + +/* +** typedef for the authorization callback function. +*/ +#ifdef SQLITE_USER_AUTHENTICATION + typedef int (*sqlite3_xauth)(void*,int,const char*,const char*,const char*, + const char*, const char*); +#else + typedef int (*sqlite3_xauth)(void*,int,const char*,const char*,const char*, + const char*); +#endif + +#ifndef SQLITE_OMIT_DEPRECATED +/* This is an extra SQLITE_TRACE macro that indicates "legacy" tracing +** in the style of sqlite3_trace() +*/ +#define SQLITE_TRACE_LEGACY 0x40 /* Use the legacy xTrace */ +#define SQLITE_TRACE_XPROFILE 0x80 /* Use the legacy xProfile */ +#else +#define SQLITE_TRACE_LEGACY 0 +#define SQLITE_TRACE_XPROFILE 0 +#endif /* SQLITE_OMIT_DEPRECATED */ +#define SQLITE_TRACE_NONLEGACY_MASK 0x0f /* Normal flags */ + + +/* +** Each database connection is an instance of the following structure. +*/ +struct sqlite3 { + sqlite3_vfs *pVfs; /* OS Interface */ + struct Vdbe *pVdbe; /* List of active virtual machines */ + CollSeq *pDfltColl; /* BINARY collseq for the database encoding */ + sqlite3_mutex *mutex; /* Connection mutex */ + Db *aDb; /* All backends */ + int nDb; /* Number of backends currently in use */ + u32 mDbFlags; /* flags recording internal state */ + u64 flags; /* flags settable by pragmas. See below */ + i64 lastRowid; /* ROWID of most recent insert (see above) */ + i64 szMmap; /* Default mmap_size setting */ + u32 nSchemaLock; /* Do not reset the schema when non-zero */ + unsigned int openFlags; /* Flags passed to sqlite3_vfs.xOpen() */ + int errCode; /* Most recent error code (SQLITE_*) */ + int errMask; /* & result codes with this before returning */ + int iSysErrno; /* Errno value from last system error */ + u16 dbOptFlags; /* Flags to enable/disable optimizations */ + u8 enc; /* Text encoding */ + u8 autoCommit; /* The auto-commit flag. */ + u8 temp_store; /* 1: file 2: memory 0: default */ + u8 mallocFailed; /* True if we have seen a malloc failure */ + u8 bBenignMalloc; /* Do not require OOMs if true */ + u8 dfltLockMode; /* Default locking-mode for attached dbs */ + signed char nextAutovac; /* Autovac setting after VACUUM if >=0 */ + u8 suppressErr; /* Do not issue error messages if true */ + u8 vtabOnConflict; /* Value to return for s3_vtab_on_conflict() */ + u8 isTransactionSavepoint; /* True if the outermost savepoint is a TS */ + u8 mTrace; /* zero or more SQLITE_TRACE flags */ + u8 noSharedCache; /* True if no shared-cache backends */ + u8 nSqlExec; /* Number of pending OP_SqlExec opcodes */ + int nextPagesize; /* Pagesize after VACUUM if >0 */ + u32 magic; /* Magic number for detect library misuse */ + int nChange; /* Value returned by sqlite3_changes() */ + int nTotalChange; /* Value returned by sqlite3_total_changes() */ + int aLimit[SQLITE_N_LIMIT]; /* Limits */ + int nMaxSorterMmap; /* Maximum size of regions mapped by sorter */ + struct sqlite3InitInfo { /* Information used during initialization */ + int newTnum; /* Rootpage of table being initialized */ + u8 iDb; /* Which db file is being initialized */ + u8 busy; /* TRUE if currently initializing */ + unsigned orphanTrigger : 1; /* Last statement is orphaned TEMP trigger */ + unsigned imposterTable : 1; /* Building an imposter table */ + unsigned reopenMemdb : 1; /* ATTACH is really a reopen using MemDB */ + char **azInit; /* "type", "name", and "tbl_name" columns */ + } init; + int nVdbeActive; /* Number of VDBEs currently running */ + int nVdbeRead; /* Number of active VDBEs that read or write */ + int nVdbeWrite; /* Number of active VDBEs that read and write */ + int nVdbeExec; /* Number of nested calls to VdbeExec() */ + int nVDestroy; /* Number of active OP_VDestroy operations */ + int nExtension; /* Number of loaded extensions */ + void **aExtension; /* Array of shared library handles */ + int (*xTrace)(u32,void*,void*,void*); /* Trace function */ + void *pTraceArg; /* Argument to the trace function */ +#ifndef SQLITE_OMIT_DEPRECATED + void (*xProfile)(void*,const char*,u64); /* Profiling function */ + void *pProfileArg; /* Argument to profile function */ +#endif + void *pCommitArg; /* Argument to xCommitCallback() */ + int (*xCommitCallback)(void*); /* Invoked at every commit. */ + void *pRollbackArg; /* Argument to xRollbackCallback() */ + void (*xRollbackCallback)(void*); /* Invoked at every commit. */ + void *pUpdateArg; + void (*xUpdateCallback)(void*,int, const char*,const char*,sqlite_int64); + Parse *pParse; /* Current parse */ +#ifdef SQLITE_ENABLE_PREUPDATE_HOOK + void *pPreUpdateArg; /* First argument to xPreUpdateCallback */ + void (*xPreUpdateCallback)( /* Registered using sqlite3_preupdate_hook() */ + void*,sqlite3*,int,char const*,char const*,sqlite3_int64,sqlite3_int64 + ); + PreUpdate *pPreUpdate; /* Context for active pre-update callback */ +#endif /* SQLITE_ENABLE_PREUPDATE_HOOK */ +#ifndef SQLITE_OMIT_WAL + int (*xWalCallback)(void *, sqlite3 *, const char *, int); + void *pWalArg; +#endif + void(*xCollNeeded)(void*,sqlite3*,int eTextRep,const char*); + void(*xCollNeeded16)(void*,sqlite3*,int eTextRep,const void*); + void *pCollNeededArg; + sqlite3_value *pErr; /* Most recent error message */ + union { + volatile int isInterrupted; /* True if sqlite3_interrupt has been called */ + double notUsed1; /* Spacer */ + } u1; + Lookaside lookaside; /* Lookaside malloc configuration */ +#ifndef SQLITE_OMIT_AUTHORIZATION + sqlite3_xauth xAuth; /* Access authorization function */ + void *pAuthArg; /* 1st argument to the access auth function */ +#endif +#ifndef SQLITE_OMIT_PROGRESS_CALLBACK + int (*xProgress)(void *); /* The progress callback */ + void *pProgressArg; /* Argument to the progress callback */ + unsigned nProgressOps; /* Number of opcodes for progress callback */ +#endif +#ifndef SQLITE_OMIT_VIRTUALTABLE + int nVTrans; /* Allocated size of aVTrans */ + Hash aModule; /* populated by sqlite3_create_module() */ + VtabCtx *pVtabCtx; /* Context for active vtab connect/create */ + VTable **aVTrans; /* Virtual tables with open transactions */ + VTable *pDisconnect; /* Disconnect these in next sqlite3_prepare() */ +#endif + Hash aFunc; /* Hash table of connection functions */ + Hash aCollSeq; /* All collating sequences */ + BusyHandler busyHandler; /* Busy callback */ + Db aDbStatic[2]; /* Static space for the 2 default backends */ + Savepoint *pSavepoint; /* List of active savepoints */ + int nAnalysisLimit; /* Number of index rows to ANALYZE */ + int busyTimeout; /* Busy handler timeout, in msec */ + int nSavepoint; /* Number of non-transaction savepoints */ + int nStatement; /* Number of nested statement-transactions */ + i64 nDeferredCons; /* Net deferred constraints this transaction. */ + i64 nDeferredImmCons; /* Net deferred immediate constraints */ + int *pnBytesFreed; /* If not NULL, increment this in DbFree() */ +#ifdef SQLITE_ENABLE_UNLOCK_NOTIFY + /* The following variables are all protected by the STATIC_MASTER + ** mutex, not by sqlite3.mutex. They are used by code in notify.c. + ** + ** When X.pUnlockConnection==Y, that means that X is waiting for Y to + ** unlock so that it can proceed. + ** + ** When X.pBlockingConnection==Y, that means that something that X tried + ** tried to do recently failed with an SQLITE_LOCKED error due to locks + ** held by Y. + */ + sqlite3 *pBlockingConnection; /* Connection that caused SQLITE_LOCKED */ + sqlite3 *pUnlockConnection; /* Connection to watch for unlock */ + void *pUnlockArg; /* Argument to xUnlockNotify */ + void (*xUnlockNotify)(void **, int); /* Unlock notify callback */ + sqlite3 *pNextBlocked; /* Next in list of all blocked connections */ +#endif +#ifdef SQLITE_USER_AUTHENTICATION + sqlite3_userauth auth; /* User authentication information */ +#endif +}; + +/* +** A macro to discover the encoding of a database. +*/ +#define SCHEMA_ENC(db) ((db)->aDb[0].pSchema->enc) +#define ENC(db) ((db)->enc) + +/* +** A u64 constant where the lower 32 bits are all zeros. Only the +** upper 32 bits are included in the argument. Necessary because some +** C-compilers still do not accept LL integer literals. +*/ +#define HI(X) ((u64)(X)<<32) + +/* +** Possible values for the sqlite3.flags. +** +** Value constraints (enforced via assert()): +** SQLITE_FullFSync == PAGER_FULLFSYNC +** SQLITE_CkptFullFSync == PAGER_CKPT_FULLFSYNC +** SQLITE_CacheSpill == PAGER_CACHE_SPILL +*/ +#define SQLITE_WriteSchema 0x00000001 /* OK to update SQLITE_MASTER */ +#define SQLITE_LegacyFileFmt 0x00000002 /* Create new databases in format 1 */ +#define SQLITE_FullColNames 0x00000004 /* Show full column names on SELECT */ +#define SQLITE_FullFSync 0x00000008 /* Use full fsync on the backend */ +#define SQLITE_CkptFullFSync 0x00000010 /* Use full fsync for checkpoint */ +#define SQLITE_CacheSpill 0x00000020 /* OK to spill pager cache */ +#define SQLITE_ShortColNames 0x00000040 /* Show short columns names */ +#define SQLITE_TrustedSchema 0x00000080 /* Allow unsafe functions and + ** vtabs in the schema definition */ +#define SQLITE_NullCallback 0x00000100 /* Invoke the callback once if the */ + /* result set is empty */ +#define SQLITE_IgnoreChecks 0x00000200 /* Do not enforce check constraints */ +#define SQLITE_ReadUncommit 0x00000400 /* READ UNCOMMITTED in shared-cache */ +#define SQLITE_NoCkptOnClose 0x00000800 /* No checkpoint on close()/DETACH */ +#define SQLITE_ReverseOrder 0x00001000 /* Reverse unordered SELECTs */ +#define SQLITE_RecTriggers 0x00002000 /* Enable recursive triggers */ +#define SQLITE_ForeignKeys 0x00004000 /* Enforce foreign key constraints */ +#define SQLITE_AutoIndex 0x00008000 /* Enable automatic indexes */ +#define SQLITE_LoadExtension 0x00010000 /* Enable load_extension */ +#define SQLITE_LoadExtFunc 0x00020000 /* Enable load_extension() SQL func */ +#define SQLITE_EnableTrigger 0x00040000 /* True to enable triggers */ +#define SQLITE_DeferFKs 0x00080000 /* Defer all FK constraints */ +#define SQLITE_QueryOnly 0x00100000 /* Disable database changes */ +#define SQLITE_CellSizeCk 0x00200000 /* Check btree cell sizes on load */ +#define SQLITE_Fts3Tokenizer 0x00400000 /* Enable fts3_tokenizer(2) */ +#define SQLITE_EnableQPSG 0x00800000 /* Query Planner Stability Guarantee*/ +#define SQLITE_TriggerEQP 0x01000000 /* Show trigger EXPLAIN QUERY PLAN */ +#define SQLITE_ResetDatabase 0x02000000 /* Reset the database */ +#define SQLITE_LegacyAlter 0x04000000 /* Legacy ALTER TABLE behaviour */ +#define SQLITE_NoSchemaError 0x08000000 /* Do not report schema parse errors*/ +#define SQLITE_Defensive 0x10000000 /* Input SQL is likely hostile */ +#define SQLITE_DqsDDL 0x20000000 /* dbl-quoted strings allowed in DDL*/ +#define SQLITE_DqsDML 0x40000000 /* dbl-quoted strings allowed in DML*/ +#define SQLITE_EnableView 0x80000000 /* Enable the use of views */ +#define SQLITE_CountRows HI(0x00001) /* Count rows changed by INSERT, */ + /* DELETE, or UPDATE and return */ + /* the count using a callback. */ + +/* Flags used only if debugging */ +#ifdef SQLITE_DEBUG +#define SQLITE_SqlTrace HI(0x0100000) /* Debug print SQL as it executes */ +#define SQLITE_VdbeListing HI(0x0200000) /* Debug listings of VDBE progs */ +#define SQLITE_VdbeTrace HI(0x0400000) /* True to trace VDBE execution */ +#define SQLITE_VdbeAddopTrace HI(0x0800000) /* Trace sqlite3VdbeAddOp() calls */ +#define SQLITE_VdbeEQP HI(0x1000000) /* Debug EXPLAIN QUERY PLAN */ +#define SQLITE_ParserTrace HI(0x2000000) /* PRAGMA parser_trace=ON */ +#endif + +/* +** Allowed values for sqlite3.mDbFlags +*/ +#define DBFLAG_SchemaChange 0x0001 /* Uncommitted Hash table changes */ +#define DBFLAG_PreferBuiltin 0x0002 /* Preference to built-in funcs */ +#define DBFLAG_Vacuum 0x0004 /* Currently in a VACUUM */ +#define DBFLAG_VacuumInto 0x0008 /* Currently running VACUUM INTO */ +#define DBFLAG_SchemaKnownOk 0x0010 /* Schema is known to be valid */ +#define DBFLAG_InternalFunc 0x0020 /* Allow use of internal functions */ +#define DBFLAG_EncodingFixed 0x0040 /* No longer possible to change enc. */ + +/* +** Bits of the sqlite3.dbOptFlags field that are used by the +** sqlite3_test_control(SQLITE_TESTCTRL_OPTIMIZATIONS,...) interface to +** selectively disable various optimizations. +*/ +#define SQLITE_QueryFlattener 0x0001 /* Query flattening */ +#define SQLITE_WindowFunc 0x0002 /* Use xInverse for window functions */ +#define SQLITE_GroupByOrder 0x0004 /* GROUPBY cover of ORDERBY */ +#define SQLITE_FactorOutConst 0x0008 /* Constant factoring */ +#define SQLITE_DistinctOpt 0x0010 /* DISTINCT using indexes */ +#define SQLITE_CoverIdxScan 0x0020 /* Covering index scans */ +#define SQLITE_OrderByIdxJoin 0x0040 /* ORDER BY of joins via index */ +#define SQLITE_Transitive 0x0080 /* Transitive constraints */ +#define SQLITE_OmitNoopJoin 0x0100 /* Omit unused tables in joins */ +#define SQLITE_CountOfView 0x0200 /* The count-of-view optimization */ +#define SQLITE_CursorHints 0x0400 /* Add OP_CursorHint opcodes */ +#define SQLITE_Stat4 0x0800 /* Use STAT4 data */ + /* TH3 expects the Stat4 ^^^^^^ value to be 0x0800. Don't change it */ +#define SQLITE_PushDown 0x1000 /* The push-down optimization */ +#define SQLITE_SimplifyJoin 0x2000 /* Convert LEFT JOIN to JOIN */ +#define SQLITE_SkipScan 0x4000 /* Skip-scans */ +#define SQLITE_PropagateConst 0x8000 /* The constant propagation opt */ +#define SQLITE_AllOpts 0xffff /* All optimizations */ + +/* +** Macros for testing whether or not optimizations are enabled or disabled. +*/ +#define OptimizationDisabled(db, mask) (((db)->dbOptFlags&(mask))!=0) +#define OptimizationEnabled(db, mask) (((db)->dbOptFlags&(mask))==0) + +/* +** Return true if it OK to factor constant expressions into the initialization +** code. The argument is a Parse object for the code generator. +*/ +#define ConstFactorOk(P) ((P)->okConstFactor) + +/* +** Possible values for the sqlite.magic field. +** The numbers are obtained at random and have no special meaning, other +** than being distinct from one another. +*/ +#define SQLITE_MAGIC_OPEN 0xa029a697 /* Database is open */ +#define SQLITE_MAGIC_CLOSED 0x9f3c2d33 /* Database is closed */ +#define SQLITE_MAGIC_SICK 0x4b771290 /* Error and awaiting close */ +#define SQLITE_MAGIC_BUSY 0xf03b7906 /* Database currently in use */ +#define SQLITE_MAGIC_ERROR 0xb5357930 /* An SQLITE_MISUSE error occurred */ +#define SQLITE_MAGIC_ZOMBIE 0x64cffc7f /* Close with last statement close */ + +/* +** Each SQL function is defined by an instance of the following +** structure. For global built-in functions (ex: substr(), max(), count()) +** a pointer to this structure is held in the sqlite3BuiltinFunctions object. +** For per-connection application-defined functions, a pointer to this +** structure is held in the db->aHash hash table. +** +** The u.pHash field is used by the global built-ins. The u.pDestructor +** field is used by per-connection app-def functions. +*/ +struct FuncDef { + i8 nArg; /* Number of arguments. -1 means unlimited */ + u32 funcFlags; /* Some combination of SQLITE_FUNC_* */ + void *pUserData; /* User data parameter */ + FuncDef *pNext; /* Next function with same name */ + void (*xSFunc)(sqlite3_context*,int,sqlite3_value**); /* func or agg-step */ + void (*xFinalize)(sqlite3_context*); /* Agg finalizer */ + void (*xValue)(sqlite3_context*); /* Current agg value */ + void (*xInverse)(sqlite3_context*,int,sqlite3_value**); /* inverse agg-step */ + const char *zName; /* SQL name of the function. */ + union { + FuncDef *pHash; /* Next with a different name but the same hash */ + FuncDestructor *pDestructor; /* Reference counted destructor function */ + } u; +}; + +/* +** This structure encapsulates a user-function destructor callback (as +** configured using create_function_v2()) and a reference counter. When +** create_function_v2() is called to create a function with a destructor, +** a single object of this type is allocated. FuncDestructor.nRef is set to +** the number of FuncDef objects created (either 1 or 3, depending on whether +** or not the specified encoding is SQLITE_ANY). The FuncDef.pDestructor +** member of each of the new FuncDef objects is set to point to the allocated +** FuncDestructor. +** +** Thereafter, when one of the FuncDef objects is deleted, the reference +** count on this object is decremented. When it reaches 0, the destructor +** is invoked and the FuncDestructor structure freed. +*/ +struct FuncDestructor { + int nRef; + void (*xDestroy)(void *); + void *pUserData; +}; + +/* +** Possible values for FuncDef.flags. Note that the _LENGTH and _TYPEOF +** values must correspond to OPFLAG_LENGTHARG and OPFLAG_TYPEOFARG. And +** SQLITE_FUNC_CONSTANT must be the same as SQLITE_DETERMINISTIC. There +** are assert() statements in the code to verify this. +** +** Value constraints (enforced via assert()): +** SQLITE_FUNC_MINMAX == NC_MinMaxAgg == SF_MinMaxAgg +** SQLITE_FUNC_LENGTH == OPFLAG_LENGTHARG +** SQLITE_FUNC_TYPEOF == OPFLAG_TYPEOFARG +** SQLITE_FUNC_CONSTANT == SQLITE_DETERMINISTIC from the API +** SQLITE_FUNC_DIRECT == SQLITE_DIRECTONLY from the API +** SQLITE_FUNC_UNSAFE == SQLITE_INNOCUOUS +** SQLITE_FUNC_ENCMASK depends on SQLITE_UTF* macros in the API +*/ +#define SQLITE_FUNC_ENCMASK 0x0003 /* SQLITE_UTF8, SQLITE_UTF16BE or UTF16LE */ +#define SQLITE_FUNC_LIKE 0x0004 /* Candidate for the LIKE optimization */ +#define SQLITE_FUNC_CASE 0x0008 /* Case-sensitive LIKE-type function */ +#define SQLITE_FUNC_EPHEM 0x0010 /* Ephemeral. Delete with VDBE */ +#define SQLITE_FUNC_NEEDCOLL 0x0020 /* sqlite3GetFuncCollSeq() might be called*/ +#define SQLITE_FUNC_LENGTH 0x0040 /* Built-in length() function */ +#define SQLITE_FUNC_TYPEOF 0x0080 /* Built-in typeof() function */ +#define SQLITE_FUNC_COUNT 0x0100 /* Built-in count(*) aggregate */ +/* 0x0200 -- available for reuse */ +#define SQLITE_FUNC_UNLIKELY 0x0400 /* Built-in unlikely() function */ +#define SQLITE_FUNC_CONSTANT 0x0800 /* Constant inputs give a constant output */ +#define SQLITE_FUNC_MINMAX 0x1000 /* True for min() and max() aggregates */ +#define SQLITE_FUNC_SLOCHNG 0x2000 /* "Slow Change". Value constant during a + ** single query - might change over time */ +#define SQLITE_FUNC_TEST 0x4000 /* Built-in testing functions */ +#define SQLITE_FUNC_OFFSET 0x8000 /* Built-in sqlite_offset() function */ +#define SQLITE_FUNC_WINDOW 0x00010000 /* Built-in window-only function */ +#define SQLITE_FUNC_INTERNAL 0x00040000 /* For use by NestedParse() only */ +#define SQLITE_FUNC_DIRECT 0x00080000 /* Not for use in TRIGGERs or VIEWs */ +#define SQLITE_FUNC_SUBTYPE 0x00100000 /* Result likely to have sub-type */ +#define SQLITE_FUNC_UNSAFE 0x00200000 /* Function has side effects */ +#define SQLITE_FUNC_INLINE 0x00400000 /* Functions implemented in-line */ + +/* Identifier numbers for each in-line function */ +#define INLINEFUNC_coalesce 0 +#define INLINEFUNC_implies_nonnull_row 1 +#define INLINEFUNC_expr_implies_expr 2 +#define INLINEFUNC_expr_compare 3 +#define INLINEFUNC_affinity 4 +#define INLINEFUNC_iif 5 +#define INLINEFUNC_unlikely 99 /* Default case */ + +/* +** The following three macros, FUNCTION(), LIKEFUNC() and AGGREGATE() are +** used to create the initializers for the FuncDef structures. +** +** FUNCTION(zName, nArg, iArg, bNC, xFunc) +** Used to create a scalar function definition of a function zName +** implemented by C function xFunc that accepts nArg arguments. The +** value passed as iArg is cast to a (void*) and made available +** as the user-data (sqlite3_user_data()) for the function. If +** argument bNC is true, then the SQLITE_FUNC_NEEDCOLL flag is set. +** +** VFUNCTION(zName, nArg, iArg, bNC, xFunc) +** Like FUNCTION except it omits the SQLITE_FUNC_CONSTANT flag. +** +** SFUNCTION(zName, nArg, iArg, bNC, xFunc) +** Like FUNCTION except it omits the SQLITE_FUNC_CONSTANT flag and +** adds the SQLITE_DIRECTONLY flag. +** +** INLINE_FUNC(zName, nArg, iFuncId, mFlags) +** zName is the name of a function that is implemented by in-line +** byte code rather than by the usual callbacks. The iFuncId +** parameter determines the function id. The mFlags parameter is +** optional SQLITE_FUNC_ flags for this function. +** +** TEST_FUNC(zName, nArg, iFuncId, mFlags) +** zName is the name of a test-only function implemented by in-line +** byte code rather than by the usual callbacks. The iFuncId +** parameter determines the function id. The mFlags parameter is +** optional SQLITE_FUNC_ flags for this function. +** +** DFUNCTION(zName, nArg, iArg, bNC, xFunc) +** Like FUNCTION except it omits the SQLITE_FUNC_CONSTANT flag and +** adds the SQLITE_FUNC_SLOCHNG flag. Used for date & time functions +** and functions like sqlite_version() that can change, but not during +** a single query. The iArg is ignored. The user-data is always set +** to a NULL pointer. The bNC parameter is not used. +** +** PURE_DATE(zName, nArg, iArg, bNC, xFunc) +** Used for "pure" date/time functions, this macro is like DFUNCTION +** except that it does set the SQLITE_FUNC_CONSTANT flags. iArg is +** ignored and the user-data for these functions is set to an +** arbitrary non-NULL pointer. The bNC parameter is not used. +** +** AGGREGATE(zName, nArg, iArg, bNC, xStep, xFinal) +** Used to create an aggregate function definition implemented by +** the C functions xStep and xFinal. The first four parameters +** are interpreted in the same way as the first 4 parameters to +** FUNCTION(). +** +** WFUNCTION(zName, nArg, iArg, xStep, xFinal, xValue, xInverse) +** Used to create an aggregate function definition implemented by +** the C functions xStep and xFinal. The first four parameters +** are interpreted in the same way as the first 4 parameters to +** FUNCTION(). +** +** LIKEFUNC(zName, nArg, pArg, flags) +** Used to create a scalar function definition of a function zName +** that accepts nArg arguments and is implemented by a call to C +** function likeFunc. Argument pArg is cast to a (void *) and made +** available as the function user-data (sqlite3_user_data()). The +** FuncDef.flags variable is set to the value passed as the flags +** parameter. +*/ +#define FUNCTION(zName, nArg, iArg, bNC, xFunc) \ + {nArg, SQLITE_FUNC_CONSTANT|SQLITE_UTF8|(bNC*SQLITE_FUNC_NEEDCOLL), \ + SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, 0, 0, #zName, {0} } +#define VFUNCTION(zName, nArg, iArg, bNC, xFunc) \ + {nArg, SQLITE_UTF8|(bNC*SQLITE_FUNC_NEEDCOLL), \ + SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, 0, 0, #zName, {0} } +#define SFUNCTION(zName, nArg, iArg, bNC, xFunc) \ + {nArg, SQLITE_UTF8|SQLITE_DIRECTONLY|SQLITE_FUNC_UNSAFE, \ + SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, 0, 0, #zName, {0} } +#define INLINE_FUNC(zName, nArg, iArg, mFlags) \ + {nArg, SQLITE_UTF8|SQLITE_FUNC_INLINE|SQLITE_FUNC_CONSTANT|(mFlags), \ + SQLITE_INT_TO_PTR(iArg), 0, noopFunc, 0, 0, 0, #zName, {0} } +#define TEST_FUNC(zName, nArg, iArg, mFlags) \ + {nArg, SQLITE_UTF8|SQLITE_FUNC_INTERNAL|SQLITE_FUNC_TEST| \ + SQLITE_FUNC_INLINE|SQLITE_FUNC_CONSTANT|(mFlags), \ + SQLITE_INT_TO_PTR(iArg), 0, noopFunc, 0, 0, 0, #zName, {0} } +#define DFUNCTION(zName, nArg, iArg, bNC, xFunc) \ + {nArg, SQLITE_FUNC_SLOCHNG|SQLITE_UTF8, \ + 0, 0, xFunc, 0, 0, 0, #zName, {0} } +#define PURE_DATE(zName, nArg, iArg, bNC, xFunc) \ + {nArg, SQLITE_FUNC_SLOCHNG|SQLITE_UTF8|SQLITE_FUNC_CONSTANT, \ + (void*)&sqlite3Config, 0, xFunc, 0, 0, 0, #zName, {0} } +#define FUNCTION2(zName, nArg, iArg, bNC, xFunc, extraFlags) \ + {nArg,SQLITE_FUNC_CONSTANT|SQLITE_UTF8|(bNC*SQLITE_FUNC_NEEDCOLL)|extraFlags,\ + SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, 0, 0, #zName, {0} } +#define STR_FUNCTION(zName, nArg, pArg, bNC, xFunc) \ + {nArg, SQLITE_FUNC_SLOCHNG|SQLITE_UTF8|(bNC*SQLITE_FUNC_NEEDCOLL), \ + pArg, 0, xFunc, 0, 0, 0, #zName, } +#define LIKEFUNC(zName, nArg, arg, flags) \ + {nArg, SQLITE_FUNC_CONSTANT|SQLITE_UTF8|flags, \ + (void *)arg, 0, likeFunc, 0, 0, 0, #zName, {0} } +#define WAGGREGATE(zName, nArg, arg, nc, xStep, xFinal, xValue, xInverse, f) \ + {nArg, SQLITE_UTF8|(nc*SQLITE_FUNC_NEEDCOLL)|f, \ + SQLITE_INT_TO_PTR(arg), 0, xStep,xFinal,xValue,xInverse,#zName, {0}} +#define INTERNAL_FUNCTION(zName, nArg, xFunc) \ + {nArg, SQLITE_FUNC_INTERNAL|SQLITE_UTF8|SQLITE_FUNC_CONSTANT, \ + 0, 0, xFunc, 0, 0, 0, #zName, {0} } + + +/* +** All current savepoints are stored in a linked list starting at +** sqlite3.pSavepoint. The first element in the list is the most recently +** opened savepoint. Savepoints are added to the list by the vdbe +** OP_Savepoint instruction. +*/ +struct Savepoint { + char *zName; /* Savepoint name (nul-terminated) */ + i64 nDeferredCons; /* Number of deferred fk violations */ + i64 nDeferredImmCons; /* Number of deferred imm fk. */ + Savepoint *pNext; /* Parent savepoint (if any) */ +}; + +/* +** The following are used as the second parameter to sqlite3Savepoint(), +** and as the P1 argument to the OP_Savepoint instruction. +*/ +#define SAVEPOINT_BEGIN 0 +#define SAVEPOINT_RELEASE 1 +#define SAVEPOINT_ROLLBACK 2 + + +/* +** Each SQLite module (virtual table definition) is defined by an +** instance of the following structure, stored in the sqlite3.aModule +** hash table. +*/ +struct Module { + const sqlite3_module *pModule; /* Callback pointers */ + const char *zName; /* Name passed to create_module() */ + int nRefModule; /* Number of pointers to this object */ + void *pAux; /* pAux passed to create_module() */ + void (*xDestroy)(void *); /* Module destructor function */ + Table *pEpoTab; /* Eponymous table for this module */ +}; + +/* +** Information about each column of an SQL table is held in an instance +** of the Column structure, in the Table.aCol[] array. +** +** Definitions: +** +** "table column index" This is the index of the column in the +** Table.aCol[] array, and also the index of +** the column in the original CREATE TABLE stmt. +** +** "storage column index" This is the index of the column in the +** record BLOB generated by the OP_MakeRecord +** opcode. The storage column index is less than +** or equal to the table column index. It is +** equal if and only if there are no VIRTUAL +** columns to the left. +*/ +struct Column { + char *zName; /* Name of this column, \000, then the type */ + Expr *pDflt; /* Default value or GENERATED ALWAYS AS value */ + char *zColl; /* Collating sequence. If NULL, use the default */ + u8 notNull; /* An OE_ code for handling a NOT NULL constraint */ + char affinity; /* One of the SQLITE_AFF_... values */ + u8 szEst; /* Estimated size of value in this column. sizeof(INT)==1 */ + u8 hName; /* Column name hash for faster lookup */ + u16 colFlags; /* Boolean properties. See COLFLAG_ defines below */ +}; + +/* Allowed values for Column.colFlags: +*/ +#define COLFLAG_PRIMKEY 0x0001 /* Column is part of the primary key */ +#define COLFLAG_HIDDEN 0x0002 /* A hidden column in a virtual table */ +#define COLFLAG_HASTYPE 0x0004 /* Type name follows column name */ +#define COLFLAG_UNIQUE 0x0008 /* Column def contains "UNIQUE" or "PK" */ +#define COLFLAG_SORTERREF 0x0010 /* Use sorter-refs with this column */ +#define COLFLAG_VIRTUAL 0x0020 /* GENERATED ALWAYS AS ... VIRTUAL */ +#define COLFLAG_STORED 0x0040 /* GENERATED ALWAYS AS ... STORED */ +#define COLFLAG_NOTAVAIL 0x0080 /* STORED column not yet calculated */ +#define COLFLAG_BUSY 0x0100 /* Blocks recursion on GENERATED columns */ +#define COLFLAG_GENERATED 0x0060 /* Combo: _STORED, _VIRTUAL */ +#define COLFLAG_NOINSERT 0x0062 /* Combo: _HIDDEN, _STORED, _VIRTUAL */ + +/* +** A "Collating Sequence" is defined by an instance of the following +** structure. Conceptually, a collating sequence consists of a name and +** a comparison routine that defines the order of that sequence. +** +** If CollSeq.xCmp is NULL, it means that the +** collating sequence is undefined. Indices built on an undefined +** collating sequence may not be read or written. +*/ +struct CollSeq { + char *zName; /* Name of the collating sequence, UTF-8 encoded */ + u8 enc; /* Text encoding handled by xCmp() */ + void *pUser; /* First argument to xCmp() */ + int (*xCmp)(void*,int, const void*, int, const void*); + void (*xDel)(void*); /* Destructor for pUser */ +}; + +/* +** A sort order can be either ASC or DESC. +*/ +#define SQLITE_SO_ASC 0 /* Sort in ascending order */ +#define SQLITE_SO_DESC 1 /* Sort in ascending order */ +#define SQLITE_SO_UNDEFINED -1 /* No sort order specified */ + +/* +** Column affinity types. +** +** These used to have mnemonic name like 'i' for SQLITE_AFF_INTEGER and +** 't' for SQLITE_AFF_TEXT. But we can save a little space and improve +** the speed a little by numbering the values consecutively. +** +** But rather than start with 0 or 1, we begin with 'A'. That way, +** when multiple affinity types are concatenated into a string and +** used as the P4 operand, they will be more readable. +** +** Note also that the numeric types are grouped together so that testing +** for a numeric type is a single comparison. And the BLOB type is first. +*/ +#define SQLITE_AFF_NONE 0x40 /* '@' */ +#define SQLITE_AFF_BLOB 0x41 /* 'A' */ +#define SQLITE_AFF_TEXT 0x42 /* 'B' */ +#define SQLITE_AFF_NUMERIC 0x43 /* 'C' */ +#define SQLITE_AFF_INTEGER 0x44 /* 'D' */ +#define SQLITE_AFF_REAL 0x45 /* 'E' */ + +#define sqlite3IsNumericAffinity(X) ((X)>=SQLITE_AFF_NUMERIC) + +/* +** The SQLITE_AFF_MASK values masks off the significant bits of an +** affinity value. +*/ +#define SQLITE_AFF_MASK 0x47 + +/* +** Additional bit values that can be ORed with an affinity without +** changing the affinity. +** +** The SQLITE_NOTNULL flag is a combination of NULLEQ and JUMPIFNULL. +** It causes an assert() to fire if either operand to a comparison +** operator is NULL. It is added to certain comparison operators to +** prove that the operands are always NOT NULL. +*/ +#define SQLITE_KEEPNULL 0x08 /* Used by vector == or <> */ +#define SQLITE_JUMPIFNULL 0x10 /* jumps if either operand is NULL */ +#define SQLITE_STOREP2 0x20 /* Store result in reg[P2] rather than jump */ +#define SQLITE_NULLEQ 0x80 /* NULL=NULL */ +#define SQLITE_NOTNULL 0x90 /* Assert that operands are never NULL */ + +/* +** An object of this type is created for each virtual table present in +** the database schema. +** +** If the database schema is shared, then there is one instance of this +** structure for each database connection (sqlite3*) that uses the shared +** schema. This is because each database connection requires its own unique +** instance of the sqlite3_vtab* handle used to access the virtual table +** implementation. sqlite3_vtab* handles can not be shared between +** database connections, even when the rest of the in-memory database +** schema is shared, as the implementation often stores the database +** connection handle passed to it via the xConnect() or xCreate() method +** during initialization internally. This database connection handle may +** then be used by the virtual table implementation to access real tables +** within the database. So that they appear as part of the callers +** transaction, these accesses need to be made via the same database +** connection as that used to execute SQL operations on the virtual table. +** +** All VTable objects that correspond to a single table in a shared +** database schema are initially stored in a linked-list pointed to by +** the Table.pVTable member variable of the corresponding Table object. +** When an sqlite3_prepare() operation is required to access the virtual +** table, it searches the list for the VTable that corresponds to the +** database connection doing the preparing so as to use the correct +** sqlite3_vtab* handle in the compiled query. +** +** When an in-memory Table object is deleted (for example when the +** schema is being reloaded for some reason), the VTable objects are not +** deleted and the sqlite3_vtab* handles are not xDisconnect()ed +** immediately. Instead, they are moved from the Table.pVTable list to +** another linked list headed by the sqlite3.pDisconnect member of the +** corresponding sqlite3 structure. They are then deleted/xDisconnected +** next time a statement is prepared using said sqlite3*. This is done +** to avoid deadlock issues involving multiple sqlite3.mutex mutexes. +** Refer to comments above function sqlite3VtabUnlockList() for an +** explanation as to why it is safe to add an entry to an sqlite3.pDisconnect +** list without holding the corresponding sqlite3.mutex mutex. +** +** The memory for objects of this type is always allocated by +** sqlite3DbMalloc(), using the connection handle stored in VTable.db as +** the first argument. +*/ +struct VTable { + sqlite3 *db; /* Database connection associated with this table */ + Module *pMod; /* Pointer to module implementation */ + sqlite3_vtab *pVtab; /* Pointer to vtab instance */ + int nRef; /* Number of pointers to this structure */ + u8 bConstraint; /* True if constraints are supported */ + u8 eVtabRisk; /* Riskiness of allowing hacker access */ + int iSavepoint; /* Depth of the SAVEPOINT stack */ + VTable *pNext; /* Next in linked list (see above) */ +}; + +/* Allowed values for VTable.eVtabRisk +*/ +#define SQLITE_VTABRISK_Low 0 +#define SQLITE_VTABRISK_Normal 1 +#define SQLITE_VTABRISK_High 2 + +/* +** The schema for each SQL table and view is represented in memory +** by an instance of the following structure. +*/ +struct Table { + char *zName; /* Name of the table or view */ + Column *aCol; /* Information about each column */ + Index *pIndex; /* List of SQL indexes on this table. */ + Select *pSelect; /* NULL for tables. Points to definition if a view. */ + FKey *pFKey; /* Linked list of all foreign keys in this table */ + char *zColAff; /* String defining the affinity of each column */ + ExprList *pCheck; /* All CHECK constraints */ + /* ... also used as column name list in a VIEW */ + int tnum; /* Root BTree page for this table */ + u32 nTabRef; /* Number of pointers to this Table */ + u32 tabFlags; /* Mask of TF_* values */ + i16 iPKey; /* If not negative, use aCol[iPKey] as the rowid */ + i16 nCol; /* Number of columns in this table */ + i16 nNVCol; /* Number of columns that are not VIRTUAL */ + LogEst nRowLogEst; /* Estimated rows in table - from sqlite_stat1 table */ + LogEst szTabRow; /* Estimated size of each table row in bytes */ +#ifdef SQLITE_ENABLE_COSTMULT + LogEst costMult; /* Cost multiplier for using this table */ +#endif + u8 keyConf; /* What to do in case of uniqueness conflict on iPKey */ +#ifndef SQLITE_OMIT_ALTERTABLE + int addColOffset; /* Offset in CREATE TABLE stmt to add a new column */ +#endif +#ifndef SQLITE_OMIT_VIRTUALTABLE + int nModuleArg; /* Number of arguments to the module */ + char **azModuleArg; /* 0: module 1: schema 2: vtab name 3...: args */ + VTable *pVTable; /* List of VTable objects. */ +#endif + Trigger *pTrigger; /* List of triggers stored in pSchema */ + Schema *pSchema; /* Schema that contains this table */ + Table *pNextZombie; /* Next on the Parse.pZombieTab list */ +}; + +/* +** Allowed values for Table.tabFlags. +** +** TF_OOOHidden applies to tables or view that have hidden columns that are +** followed by non-hidden columns. Example: "CREATE VIRTUAL TABLE x USING +** vtab1(a HIDDEN, b);". Since "b" is a non-hidden column but "a" is hidden, +** the TF_OOOHidden attribute would apply in this case. Such tables require +** special handling during INSERT processing. The "OOO" means "Out Of Order". +** +** Constraints: +** +** TF_HasVirtual == COLFLAG_Virtual +** TF_HasStored == COLFLAG_Stored +*/ +#define TF_Readonly 0x0001 /* Read-only system table */ +#define TF_Ephemeral 0x0002 /* An ephemeral table */ +#define TF_HasPrimaryKey 0x0004 /* Table has a primary key */ +#define TF_Autoincrement 0x0008 /* Integer primary key is autoincrement */ +#define TF_HasStat1 0x0010 /* nRowLogEst set from sqlite_stat1 */ +#define TF_HasVirtual 0x0020 /* Has one or more VIRTUAL columns */ +#define TF_HasStored 0x0040 /* Has one or more STORED columns */ +#define TF_HasGenerated 0x0060 /* Combo: HasVirtual + HasStored */ +#define TF_WithoutRowid 0x0080 /* No rowid. PRIMARY KEY is the key */ +#define TF_StatsUsed 0x0100 /* Query planner decisions affected by + ** Index.aiRowLogEst[] values */ +#define TF_NoVisibleRowid 0x0200 /* No user-visible "rowid" column */ +#define TF_OOOHidden 0x0400 /* Out-of-Order hidden columns */ +#define TF_HasNotNull 0x0800 /* Contains NOT NULL constraints */ +#define TF_Shadow 0x1000 /* True for a shadow table */ + +/* +** Test to see whether or not a table is a virtual table. This is +** done as a macro so that it will be optimized out when virtual +** table support is omitted from the build. +*/ +#ifndef SQLITE_OMIT_VIRTUALTABLE +# define IsVirtual(X) ((X)->nModuleArg) +# define ExprIsVtab(X) \ + ((X)->op==TK_COLUMN && (X)->y.pTab!=0 && (X)->y.pTab->nModuleArg) +#else +# define IsVirtual(X) 0 +# define ExprIsVtab(X) 0 +#endif + +/* +** Macros to determine if a column is hidden. IsOrdinaryHiddenColumn() +** only works for non-virtual tables (ordinary tables and views) and is +** always false unless SQLITE_ENABLE_HIDDEN_COLUMNS is defined. The +** IsHiddenColumn() macro is general purpose. +*/ +#if defined(SQLITE_ENABLE_HIDDEN_COLUMNS) +# define IsHiddenColumn(X) (((X)->colFlags & COLFLAG_HIDDEN)!=0) +# define IsOrdinaryHiddenColumn(X) (((X)->colFlags & COLFLAG_HIDDEN)!=0) +#elif !defined(SQLITE_OMIT_VIRTUALTABLE) +# define IsHiddenColumn(X) (((X)->colFlags & COLFLAG_HIDDEN)!=0) +# define IsOrdinaryHiddenColumn(X) 0 +#else +# define IsHiddenColumn(X) 0 +# define IsOrdinaryHiddenColumn(X) 0 +#endif + + +/* Does the table have a rowid */ +#define HasRowid(X) (((X)->tabFlags & TF_WithoutRowid)==0) +#define VisibleRowid(X) (((X)->tabFlags & TF_NoVisibleRowid)==0) + +/* +** Each foreign key constraint is an instance of the following structure. +** +** A foreign key is associated with two tables. The "from" table is +** the table that contains the REFERENCES clause that creates the foreign +** key. The "to" table is the table that is named in the REFERENCES clause. +** Consider this example: +** +** CREATE TABLE ex1( +** a INTEGER PRIMARY KEY, +** b INTEGER CONSTRAINT fk1 REFERENCES ex2(x) +** ); +** +** For foreign key "fk1", the from-table is "ex1" and the to-table is "ex2". +** Equivalent names: +** +** from-table == child-table +** to-table == parent-table +** +** Each REFERENCES clause generates an instance of the following structure +** which is attached to the from-table. The to-table need not exist when +** the from-table is created. The existence of the to-table is not checked. +** +** The list of all parents for child Table X is held at X.pFKey. +** +** A list of all children for a table named Z (which might not even exist) +** is held in Schema.fkeyHash with a hash key of Z. +*/ +struct FKey { + Table *pFrom; /* Table containing the REFERENCES clause (aka: Child) */ + FKey *pNextFrom; /* Next FKey with the same in pFrom. Next parent of pFrom */ + char *zTo; /* Name of table that the key points to (aka: Parent) */ + FKey *pNextTo; /* Next with the same zTo. Next child of zTo. */ + FKey *pPrevTo; /* Previous with the same zTo */ + int nCol; /* Number of columns in this key */ + /* EV: R-30323-21917 */ + u8 isDeferred; /* True if constraint checking is deferred till COMMIT */ + u8 aAction[2]; /* ON DELETE and ON UPDATE actions, respectively */ + Trigger *apTrigger[2];/* Triggers for aAction[] actions */ + struct sColMap { /* Mapping of columns in pFrom to columns in zTo */ + int iFrom; /* Index of column in pFrom */ + char *zCol; /* Name of column in zTo. If NULL use PRIMARY KEY */ + } aCol[1]; /* One entry for each of nCol columns */ +}; + +/* +** SQLite supports many different ways to resolve a constraint +** error. ROLLBACK processing means that a constraint violation +** causes the operation in process to fail and for the current transaction +** to be rolled back. ABORT processing means the operation in process +** fails and any prior changes from that one operation are backed out, +** but the transaction is not rolled back. FAIL processing means that +** the operation in progress stops and returns an error code. But prior +** changes due to the same operation are not backed out and no rollback +** occurs. IGNORE means that the particular row that caused the constraint +** error is not inserted or updated. Processing continues and no error +** is returned. REPLACE means that preexisting database rows that caused +** a UNIQUE constraint violation are removed so that the new insert or +** update can proceed. Processing continues and no error is reported. +** +** RESTRICT, SETNULL, and CASCADE actions apply only to foreign keys. +** RESTRICT is the same as ABORT for IMMEDIATE foreign keys and the +** same as ROLLBACK for DEFERRED keys. SETNULL means that the foreign +** key is set to NULL. CASCADE means that a DELETE or UPDATE of the +** referenced table row is propagated into the row that holds the +** foreign key. +** +** The following symbolic values are used to record which type +** of action to take. +*/ +#define OE_None 0 /* There is no constraint to check */ +#define OE_Rollback 1 /* Fail the operation and rollback the transaction */ +#define OE_Abort 2 /* Back out changes but do no rollback transaction */ +#define OE_Fail 3 /* Stop the operation but leave all prior changes */ +#define OE_Ignore 4 /* Ignore the error. Do not do the INSERT or UPDATE */ +#define OE_Replace 5 /* Delete existing record, then do INSERT or UPDATE */ +#define OE_Update 6 /* Process as a DO UPDATE in an upsert */ +#define OE_Restrict 7 /* OE_Abort for IMMEDIATE, OE_Rollback for DEFERRED */ +#define OE_SetNull 8 /* Set the foreign key value to NULL */ +#define OE_SetDflt 9 /* Set the foreign key value to its default */ +#define OE_Cascade 10 /* Cascade the changes */ +#define OE_Default 11 /* Do whatever the default action is */ + + +/* +** An instance of the following structure is passed as the first +** argument to sqlite3VdbeKeyCompare and is used to control the +** comparison of the two index keys. +** +** Note that aSortOrder[] and aColl[] have nField+1 slots. There +** are nField slots for the columns of an index then one extra slot +** for the rowid at the end. +*/ +struct KeyInfo { + u32 nRef; /* Number of references to this KeyInfo object */ + u8 enc; /* Text encoding - one of the SQLITE_UTF* values */ + u16 nKeyField; /* Number of key columns in the index */ + u16 nAllField; /* Total columns, including key plus others */ + sqlite3 *db; /* The database connection */ + u8 *aSortFlags; /* Sort order for each column. */ + CollSeq *aColl[1]; /* Collating sequence for each term of the key */ +}; + +/* +** Allowed bit values for entries in the KeyInfo.aSortFlags[] array. +*/ +#define KEYINFO_ORDER_DESC 0x01 /* DESC sort order */ +#define KEYINFO_ORDER_BIGNULL 0x02 /* NULL is larger than any other value */ + +/* +** This object holds a record which has been parsed out into individual +** fields, for the purposes of doing a comparison. +** +** A record is an object that contains one or more fields of data. +** Records are used to store the content of a table row and to store +** the key of an index. A blob encoding of a record is created by +** the OP_MakeRecord opcode of the VDBE and is disassembled by the +** OP_Column opcode. +** +** An instance of this object serves as a "key" for doing a search on +** an index b+tree. The goal of the search is to find the entry that +** is closed to the key described by this object. This object might hold +** just a prefix of the key. The number of fields is given by +** pKeyInfo->nField. +** +** The r1 and r2 fields are the values to return if this key is less than +** or greater than a key in the btree, respectively. These are normally +** -1 and +1 respectively, but might be inverted to +1 and -1 if the b-tree +** is in DESC order. +** +** The key comparison functions actually return default_rc when they find +** an equals comparison. default_rc can be -1, 0, or +1. If there are +** multiple entries in the b-tree with the same key (when only looking +** at the first pKeyInfo->nFields,) then default_rc can be set to -1 to +** cause the search to find the last match, or +1 to cause the search to +** find the first match. +** +** The key comparison functions will set eqSeen to true if they ever +** get and equal results when comparing this structure to a b-tree record. +** When default_rc!=0, the search might end up on the record immediately +** before the first match or immediately after the last match. The +** eqSeen field will indicate whether or not an exact match exists in the +** b-tree. +*/ +struct UnpackedRecord { + KeyInfo *pKeyInfo; /* Collation and sort-order information */ + Mem *aMem; /* Values */ + u16 nField; /* Number of entries in apMem[] */ + i8 default_rc; /* Comparison result if keys are equal */ + u8 errCode; /* Error detected by xRecordCompare (CORRUPT or NOMEM) */ + i8 r1; /* Value to return if (lhs < rhs) */ + i8 r2; /* Value to return if (lhs > rhs) */ + u8 eqSeen; /* True if an equality comparison has been seen */ +}; + + +/* +** Each SQL index is represented in memory by an +** instance of the following structure. +** +** The columns of the table that are to be indexed are described +** by the aiColumn[] field of this structure. For example, suppose +** we have the following table and index: +** +** CREATE TABLE Ex1(c1 int, c2 int, c3 text); +** CREATE INDEX Ex2 ON Ex1(c3,c1); +** +** In the Table structure describing Ex1, nCol==3 because there are +** three columns in the table. In the Index structure describing +** Ex2, nColumn==2 since 2 of the 3 columns of Ex1 are indexed. +** The value of aiColumn is {2, 0}. aiColumn[0]==2 because the +** first column to be indexed (c3) has an index of 2 in Ex1.aCol[]. +** The second column to be indexed (c1) has an index of 0 in +** Ex1.aCol[], hence Ex2.aiColumn[1]==0. +** +** The Index.onError field determines whether or not the indexed columns +** must be unique and what to do if they are not. When Index.onError=OE_None, +** it means this is not a unique index. Otherwise it is a unique index +** and the value of Index.onError indicate the which conflict resolution +** algorithm to employ whenever an attempt is made to insert a non-unique +** element. +** +** While parsing a CREATE TABLE or CREATE INDEX statement in order to +** generate VDBE code (as opposed to parsing one read from an sqlite_master +** table as part of parsing an existing database schema), transient instances +** of this structure may be created. In this case the Index.tnum variable is +** used to store the address of a VDBE instruction, not a database page +** number (it cannot - the database page is not allocated until the VDBE +** program is executed). See convertToWithoutRowidTable() for details. +*/ +struct Index { + char *zName; /* Name of this index */ + i16 *aiColumn; /* Which columns are used by this index. 1st is 0 */ + LogEst *aiRowLogEst; /* From ANALYZE: Est. rows selected by each column */ + Table *pTable; /* The SQL table being indexed */ + char *zColAff; /* String defining the affinity of each column */ + Index *pNext; /* The next index associated with the same table */ + Schema *pSchema; /* Schema containing this index */ + u8 *aSortOrder; /* for each column: True==DESC, False==ASC */ + const char **azColl; /* Array of collation sequence names for index */ + Expr *pPartIdxWhere; /* WHERE clause for partial indices */ + ExprList *aColExpr; /* Column expressions */ + int tnum; /* DB Page containing root of this index */ + LogEst szIdxRow; /* Estimated average row size in bytes */ + u16 nKeyCol; /* Number of columns forming the key */ + u16 nColumn; /* Number of columns stored in the index */ + u8 onError; /* OE_Abort, OE_Ignore, OE_Replace, or OE_None */ + unsigned idxType:2; /* 0:Normal 1:UNIQUE, 2:PRIMARY KEY, 3:IPK */ + unsigned bUnordered:1; /* Use this index for == or IN queries only */ + unsigned uniqNotNull:1; /* True if UNIQUE and NOT NULL for all columns */ + unsigned isResized:1; /* True if resizeIndexObject() has been called */ + unsigned isCovering:1; /* True if this is a covering index */ + unsigned noSkipScan:1; /* Do not try to use skip-scan if true */ + unsigned hasStat1:1; /* aiRowLogEst values come from sqlite_stat1 */ + unsigned bNoQuery:1; /* Do not use this index to optimize queries */ + unsigned bAscKeyBug:1; /* True if the bba7b69f9849b5bf bug applies */ + unsigned bHasVCol:1; /* Index references one or more VIRTUAL columns */ +#ifdef SQLITE_ENABLE_STAT4 + int nSample; /* Number of elements in aSample[] */ + int nSampleCol; /* Size of IndexSample.anEq[] and so on */ + tRowcnt *aAvgEq; /* Average nEq values for keys not in aSample */ + IndexSample *aSample; /* Samples of the left-most key */ + tRowcnt *aiRowEst; /* Non-logarithmic stat1 data for this index */ + tRowcnt nRowEst0; /* Non-logarithmic number of rows in the index */ +#endif + Bitmask colNotIdxed; /* 0 for unindexed columns in pTab */ +}; + +/* +** Allowed values for Index.idxType +*/ +#define SQLITE_IDXTYPE_APPDEF 0 /* Created using CREATE INDEX */ +#define SQLITE_IDXTYPE_UNIQUE 1 /* Implements a UNIQUE constraint */ +#define SQLITE_IDXTYPE_PRIMARYKEY 2 /* Is the PRIMARY KEY for the table */ +#define SQLITE_IDXTYPE_IPK 3 /* INTEGER PRIMARY KEY index */ + +/* Return true if index X is a PRIMARY KEY index */ +#define IsPrimaryKeyIndex(X) ((X)->idxType==SQLITE_IDXTYPE_PRIMARYKEY) + +/* Return true if index X is a UNIQUE index */ +#define IsUniqueIndex(X) ((X)->onError!=OE_None) + +/* The Index.aiColumn[] values are normally positive integer. But +** there are some negative values that have special meaning: +*/ +#define XN_ROWID (-1) /* Indexed column is the rowid */ +#define XN_EXPR (-2) /* Indexed column is an expression */ + +/* +** Each sample stored in the sqlite_stat4 table is represented in memory +** using a structure of this type. See documentation at the top of the +** analyze.c source file for additional information. +*/ +struct IndexSample { + void *p; /* Pointer to sampled record */ + int n; /* Size of record in bytes */ + tRowcnt *anEq; /* Est. number of rows where the key equals this sample */ + tRowcnt *anLt; /* Est. number of rows where key is less than this sample */ + tRowcnt *anDLt; /* Est. number of distinct keys less than this sample */ +}; + +/* +** Possible values to use within the flags argument to sqlite3GetToken(). +*/ +#define SQLITE_TOKEN_QUOTED 0x1 /* Token is a quoted identifier. */ +#define SQLITE_TOKEN_KEYWORD 0x2 /* Token is a keyword. */ + +/* +** Each token coming out of the lexer is an instance of +** this structure. Tokens are also used as part of an expression. +** +** The memory that "z" points to is owned by other objects. Take care +** that the owner of the "z" string does not deallocate the string before +** the Token goes out of scope! Very often, the "z" points to some place +** in the middle of the Parse.zSql text. But it might also point to a +** static string. +*/ +struct Token { + const char *z; /* Text of the token. Not NULL-terminated! */ + unsigned int n; /* Number of characters in this token */ +}; + +/* +** An instance of this structure contains information needed to generate +** code for a SELECT that contains aggregate functions. +** +** If Expr.op==TK_AGG_COLUMN or TK_AGG_FUNCTION then Expr.pAggInfo is a +** pointer to this structure. The Expr.iAgg field is the index in +** AggInfo.aCol[] or AggInfo.aFunc[] of information needed to generate +** code for that node. +** +** AggInfo.pGroupBy and AggInfo.aFunc.pExpr point to fields within the +** original Select structure that describes the SELECT statement. These +** fields do not need to be freed when deallocating the AggInfo structure. +*/ +struct AggInfo { + u8 directMode; /* Direct rendering mode means take data directly + ** from source tables rather than from accumulators */ + u8 useSortingIdx; /* In direct mode, reference the sorting index rather + ** than the source table */ + int sortingIdx; /* Cursor number of the sorting index */ + int sortingIdxPTab; /* Cursor number of pseudo-table */ + int nSortingColumn; /* Number of columns in the sorting index */ + int mnReg, mxReg; /* Range of registers allocated for aCol and aFunc */ + ExprList *pGroupBy; /* The group by clause */ + struct AggInfo_col { /* For each column used in source tables */ + Table *pTab; /* Source table */ + int iTable; /* Cursor number of the source table */ + int iColumn; /* Column number within the source table */ + int iSorterColumn; /* Column number in the sorting index */ + int iMem; /* Memory location that acts as accumulator */ + Expr *pExpr; /* The original expression */ + } *aCol; + int nColumn; /* Number of used entries in aCol[] */ + int nAccumulator; /* Number of columns that show through to the output. + ** Additional columns are used only as parameters to + ** aggregate functions */ + struct AggInfo_func { /* For each aggregate function */ + Expr *pExpr; /* Expression encoding the function */ + FuncDef *pFunc; /* The aggregate function implementation */ + int iMem; /* Memory location that acts as accumulator */ + int iDistinct; /* Ephemeral table used to enforce DISTINCT */ + } *aFunc; + int nFunc; /* Number of entries in aFunc[] */ +#ifdef SQLITE_DEBUG + u32 iAggMagic; /* Sanity checking constant */ +#endif +}; + +/* +** Allowed values for AggInfo.iAggMagic +*/ +#define SQLITE_AGGMAGIC_VALID 0x05cadade + +/* +** True if the AggInfo object is valid. Used inside of assert() only. +*/ +#ifdef SQLITE_DEBUG +# define AggInfoValid(P) ((P)->iAggMagic==SQLITE_AGGMAGIC_VALID) +#endif + +/* +** The datatype ynVar is a signed integer, either 16-bit or 32-bit. +** Usually it is 16-bits. But if SQLITE_MAX_VARIABLE_NUMBER is greater +** than 32767 we have to make it 32-bit. 16-bit is preferred because +** it uses less memory in the Expr object, which is a big memory user +** in systems with lots of prepared statements. And few applications +** need more than about 10 or 20 variables. But some extreme users want +** to have prepared statements with over 32766 variables, and for them +** the option is available (at compile-time). +*/ +#if SQLITE_MAX_VARIABLE_NUMBER<32767 +typedef i16 ynVar; +#else +typedef int ynVar; +#endif + +/* +** Each node of an expression in the parse tree is an instance +** of this structure. +** +** Expr.op is the opcode. The integer parser token codes are reused +** as opcodes here. For example, the parser defines TK_GE to be an integer +** code representing the ">=" operator. This same integer code is reused +** to represent the greater-than-or-equal-to operator in the expression +** tree. +** +** If the expression is an SQL literal (TK_INTEGER, TK_FLOAT, TK_BLOB, +** or TK_STRING), then Expr.token contains the text of the SQL literal. If +** the expression is a variable (TK_VARIABLE), then Expr.token contains the +** variable name. Finally, if the expression is an SQL function (TK_FUNCTION), +** then Expr.token contains the name of the function. +** +** Expr.pRight and Expr.pLeft are the left and right subexpressions of a +** binary operator. Either or both may be NULL. +** +** Expr.x.pList is a list of arguments if the expression is an SQL function, +** a CASE expression or an IN expression of the form " IN (, ...)". +** Expr.x.pSelect is used if the expression is a sub-select or an expression of +** the form " IN (SELECT ...)". If the EP_xIsSelect bit is set in the +** Expr.flags mask, then Expr.x.pSelect is valid. Otherwise, Expr.x.pList is +** valid. +** +** An expression of the form ID or ID.ID refers to a column in a table. +** For such expressions, Expr.op is set to TK_COLUMN and Expr.iTable is +** the integer cursor number of a VDBE cursor pointing to that table and +** Expr.iColumn is the column number for the specific column. If the +** expression is used as a result in an aggregate SELECT, then the +** value is also stored in the Expr.iAgg column in the aggregate so that +** it can be accessed after all aggregates are computed. +** +** If the expression is an unbound variable marker (a question mark +** character '?' in the original SQL) then the Expr.iTable holds the index +** number for that variable. +** +** If the expression is a subquery then Expr.iColumn holds an integer +** register number containing the result of the subquery. If the +** subquery gives a constant result, then iTable is -1. If the subquery +** gives a different answer at different times during statement processing +** then iTable is the address of a subroutine that computes the subquery. +** +** If the Expr is of type OP_Column, and the table it is selecting from +** is a disk table or the "old.*" pseudo-table, then pTab points to the +** corresponding table definition. +** +** ALLOCATION NOTES: +** +** Expr objects can use a lot of memory space in database schema. To +** help reduce memory requirements, sometimes an Expr object will be +** truncated. And to reduce the number of memory allocations, sometimes +** two or more Expr objects will be stored in a single memory allocation, +** together with Expr.zToken strings. +** +** If the EP_Reduced and EP_TokenOnly flags are set when +** an Expr object is truncated. When EP_Reduced is set, then all +** the child Expr objects in the Expr.pLeft and Expr.pRight subtrees +** are contained within the same memory allocation. Note, however, that +** the subtrees in Expr.x.pList or Expr.x.pSelect are always separately +** allocated, regardless of whether or not EP_Reduced is set. +*/ +struct Expr { + u8 op; /* Operation performed by this node */ + char affExpr; /* affinity, or RAISE type */ + u8 op2; /* TK_REGISTER/TK_TRUTH: original value of Expr.op + ** TK_COLUMN: the value of p5 for OP_Column + ** TK_AGG_FUNCTION: nesting depth + ** TK_FUNCTION: NC_SelfRef flag if needs OP_PureFunc */ +#ifdef SQLITE_DEBUG + u8 vvaFlags; /* Verification flags. */ +#endif + u32 flags; /* Various flags. EP_* See below */ + union { + char *zToken; /* Token value. Zero terminated and dequoted */ + int iValue; /* Non-negative integer value if EP_IntValue */ + } u; + + /* If the EP_TokenOnly flag is set in the Expr.flags mask, then no + ** space is allocated for the fields below this point. An attempt to + ** access them will result in a segfault or malfunction. + *********************************************************************/ + + Expr *pLeft; /* Left subnode */ + Expr *pRight; /* Right subnode */ + union { + ExprList *pList; /* op = IN, EXISTS, SELECT, CASE, FUNCTION, BETWEEN */ + Select *pSelect; /* EP_xIsSelect and op = IN, EXISTS, SELECT */ + } x; + + /* If the EP_Reduced flag is set in the Expr.flags mask, then no + ** space is allocated for the fields below this point. An attempt to + ** access them will result in a segfault or malfunction. + *********************************************************************/ + +#if SQLITE_MAX_EXPR_DEPTH>0 + int nHeight; /* Height of the tree headed by this node */ +#endif + int iTable; /* TK_COLUMN: cursor number of table holding column + ** TK_REGISTER: register number + ** TK_TRIGGER: 1 -> new, 0 -> old + ** EP_Unlikely: 134217728 times likelihood + ** TK_IN: ephemerial table holding RHS + ** TK_SELECT_COLUMN: Number of columns on the LHS + ** TK_SELECT: 1st register of result vector */ + ynVar iColumn; /* TK_COLUMN: column index. -1 for rowid. + ** TK_VARIABLE: variable number (always >= 1). + ** TK_SELECT_COLUMN: column of the result vector */ + i16 iAgg; /* Which entry in pAggInfo->aCol[] or ->aFunc[] */ + i16 iRightJoinTable; /* If EP_FromJoin, the right table of the join */ + AggInfo *pAggInfo; /* Used by TK_AGG_COLUMN and TK_AGG_FUNCTION */ + union { + Table *pTab; /* TK_COLUMN: Table containing column. Can be NULL + ** for a column of an index on an expression */ + Window *pWin; /* EP_WinFunc: Window/Filter defn for a function */ + struct { /* TK_IN, TK_SELECT, and TK_EXISTS */ + int iAddr; /* Subroutine entry address */ + int regReturn; /* Register used to hold return address */ + } sub; + } y; +}; + +/* +** The following are the meanings of bits in the Expr.flags field. +** Value restrictions: +** +** EP_Agg == NC_HasAgg == SF_HasAgg +** EP_Win == NC_HasWin +*/ +#define EP_FromJoin 0x000001 /* Originates in ON/USING clause of outer join */ +#define EP_Distinct 0x000002 /* Aggregate function with DISTINCT keyword */ +#define EP_HasFunc 0x000004 /* Contains one or more functions of any kind */ +#define EP_FixedCol 0x000008 /* TK_Column with a known fixed value */ +#define EP_Agg 0x000010 /* Contains one or more aggregate functions */ +#define EP_VarSelect 0x000020 /* pSelect is correlated, not constant */ +#define EP_DblQuoted 0x000040 /* token.z was originally in "..." */ +#define EP_InfixFunc 0x000080 /* True for an infix function: LIKE, GLOB, etc */ +#define EP_Collate 0x000100 /* Tree contains a TK_COLLATE operator */ +#define EP_Commuted 0x000200 /* Comparison operator has been commuted */ +#define EP_IntValue 0x000400 /* Integer value contained in u.iValue */ +#define EP_xIsSelect 0x000800 /* x.pSelect is valid (otherwise x.pList is) */ +#define EP_Skip 0x001000 /* Operator does not contribute to affinity */ +#define EP_Reduced 0x002000 /* Expr struct EXPR_REDUCEDSIZE bytes only */ +#define EP_TokenOnly 0x004000 /* Expr struct EXPR_TOKENONLYSIZE bytes only */ +#define EP_Win 0x008000 /* Contains window functions */ +#define EP_MemToken 0x010000 /* Need to sqlite3DbFree() Expr.zToken */ + /* 0x020000 // available for reuse */ +#define EP_Unlikely 0x040000 /* unlikely() or likelihood() function */ +#define EP_ConstFunc 0x080000 /* A SQLITE_FUNC_CONSTANT or _SLOCHNG function */ +#define EP_CanBeNull 0x100000 /* Can be null despite NOT NULL constraint */ +#define EP_Subquery 0x200000 /* Tree contains a TK_SELECT operator */ +#define EP_Alias 0x400000 /* Is an alias for a result set column */ +#define EP_Leaf 0x800000 /* Expr.pLeft, .pRight, .u.pSelect all NULL */ +#define EP_WinFunc 0x1000000 /* TK_FUNCTION with Expr.y.pWin set */ +#define EP_Subrtn 0x2000000 /* Uses Expr.y.sub. TK_IN, _SELECT, or _EXISTS */ +#define EP_Quoted 0x4000000 /* TK_ID was originally quoted */ +#define EP_Static 0x8000000 /* Held in memory not obtained from malloc() */ +#define EP_IsTrue 0x10000000 /* Always has boolean value of TRUE */ +#define EP_IsFalse 0x20000000 /* Always has boolean value of FALSE */ +#define EP_FromDDL 0x40000000 /* Originates from sqlite_master */ + /* 0x80000000 // Available */ + +/* +** The EP_Propagate mask is a set of properties that automatically propagate +** upwards into parent nodes. +*/ +#define EP_Propagate (EP_Collate|EP_Subquery|EP_HasFunc) + +/* +** These macros can be used to test, set, or clear bits in the +** Expr.flags field. +*/ +#define ExprHasProperty(E,P) (((E)->flags&(P))!=0) +#define ExprHasAllProperty(E,P) (((E)->flags&(P))==(P)) +#define ExprSetProperty(E,P) (E)->flags|=(P) +#define ExprClearProperty(E,P) (E)->flags&=~(P) +#define ExprAlwaysTrue(E) (((E)->flags&(EP_FromJoin|EP_IsTrue))==EP_IsTrue) +#define ExprAlwaysFalse(E) (((E)->flags&(EP_FromJoin|EP_IsFalse))==EP_IsFalse) + + +/* Flags for use with Expr.vvaFlags +*/ +#define EP_NoReduce 0x01 /* Cannot EXPRDUP_REDUCE this Expr */ +#define EP_Immutable 0x02 /* Do not change this Expr node */ + +/* The ExprSetVVAProperty() macro is used for Verification, Validation, +** and Accreditation only. It works like ExprSetProperty() during VVA +** processes but is a no-op for delivery. +*/ +#ifdef SQLITE_DEBUG +# define ExprSetVVAProperty(E,P) (E)->vvaFlags|=(P) +# define ExprHasVVAProperty(E,P) (((E)->vvaFlags&(P))!=0) +# define ExprClearVVAProperties(E) (E)->vvaFlags = 0 +#else +# define ExprSetVVAProperty(E,P) +# define ExprHasVVAProperty(E,P) 0 +# define ExprClearVVAProperties(E) +#endif + +/* +** Macros to determine the number of bytes required by a normal Expr +** struct, an Expr struct with the EP_Reduced flag set in Expr.flags +** and an Expr struct with the EP_TokenOnly flag set. +*/ +#define EXPR_FULLSIZE sizeof(Expr) /* Full size */ +#define EXPR_REDUCEDSIZE offsetof(Expr,iTable) /* Common features */ +#define EXPR_TOKENONLYSIZE offsetof(Expr,pLeft) /* Fewer features */ + +/* +** Flags passed to the sqlite3ExprDup() function. See the header comment +** above sqlite3ExprDup() for details. +*/ +#define EXPRDUP_REDUCE 0x0001 /* Used reduced-size Expr nodes */ + +/* +** True if the expression passed as an argument was a function with +** an OVER() clause (a window function). +*/ +#ifdef SQLITE_OMIT_WINDOWFUNC +# define IsWindowFunc(p) 0 +#else +# define IsWindowFunc(p) ( \ + ExprHasProperty((p), EP_WinFunc) && p->y.pWin->eFrmType!=TK_FILTER \ + ) +#endif + +/* +** A list of expressions. Each expression may optionally have a +** name. An expr/name combination can be used in several ways, such +** as the list of "expr AS ID" fields following a "SELECT" or in the +** list of "ID = expr" items in an UPDATE. A list of expressions can +** also be used as the argument to a function, in which case the a.zName +** field is not used. +** +** In order to try to keep memory usage down, the Expr.a.zEName field +** is used for multiple purposes: +** +** eEName Usage +** ---------- ------------------------- +** ENAME_NAME (1) the AS of result set column +** (2) COLUMN= of an UPDATE +** +** ENAME_TAB DB.TABLE.NAME used to resolve names +** of subqueries +** +** ENAME_SPAN Text of the original result set +** expression. +*/ +struct ExprList { + int nExpr; /* Number of expressions on the list */ + struct ExprList_item { /* For each expression in the list */ + Expr *pExpr; /* The parse tree for this expression */ + char *zEName; /* Token associated with this expression */ + u8 sortFlags; /* Mask of KEYINFO_ORDER_* flags */ + unsigned eEName :2; /* Meaning of zEName */ + unsigned done :1; /* A flag to indicate when processing is finished */ + unsigned reusable :1; /* Constant expression is reusable */ + unsigned bSorterRef :1; /* Defer evaluation until after sorting */ + unsigned bNulls: 1; /* True if explicit "NULLS FIRST/LAST" */ + union { + struct { + u16 iOrderByCol; /* For ORDER BY, column number in result set */ + u16 iAlias; /* Index into Parse.aAlias[] for zName */ + } x; + int iConstExprReg; /* Register in which Expr value is cached */ + } u; + } a[1]; /* One slot for each expression in the list */ +}; + +/* +** Allowed values for Expr.a.eEName +*/ +#define ENAME_NAME 0 /* The AS clause of a result set */ +#define ENAME_SPAN 1 /* Complete text of the result set expression */ +#define ENAME_TAB 2 /* "DB.TABLE.NAME" for the result set */ + +/* +** An instance of this structure can hold a simple list of identifiers, +** such as the list "a,b,c" in the following statements: +** +** INSERT INTO t(a,b,c) VALUES ...; +** CREATE INDEX idx ON t(a,b,c); +** CREATE TRIGGER trig BEFORE UPDATE ON t(a,b,c) ...; +** +** The IdList.a.idx field is used when the IdList represents the list of +** column names after a table name in an INSERT statement. In the statement +** +** INSERT INTO t(a,b,c) ... +** +** If "a" is the k-th column of table "t", then IdList.a[0].idx==k. +*/ +struct IdList { + struct IdList_item { + char *zName; /* Name of the identifier */ + int idx; /* Index in some Table.aCol[] of a column named zName */ + } *a; + int nId; /* Number of identifiers on the list */ +}; + +/* +** The following structure describes the FROM clause of a SELECT statement. +** Each table or subquery in the FROM clause is a separate element of +** the SrcList.a[] array. +** +** With the addition of multiple database support, the following structure +** can also be used to describe a particular table such as the table that +** is modified by an INSERT, DELETE, or UPDATE statement. In standard SQL, +** such a table must be a simple name: ID. But in SQLite, the table can +** now be identified by a database name, a dot, then the table name: ID.ID. +** +** The jointype starts out showing the join type between the current table +** and the next table on the list. The parser builds the list this way. +** But sqlite3SrcListShiftJoinType() later shifts the jointypes so that each +** jointype expresses the join between the table and the previous table. +** +** In the colUsed field, the high-order bit (bit 63) is set if the table +** contains more than 63 columns and the 64-th or later column is used. +*/ +struct SrcList { + int nSrc; /* Number of tables or subqueries in the FROM clause */ + u32 nAlloc; /* Number of entries allocated in a[] below */ + struct SrcList_item { + Schema *pSchema; /* Schema to which this item is fixed */ + char *zDatabase; /* Name of database holding this table */ + char *zName; /* Name of the table */ + char *zAlias; /* The "B" part of a "A AS B" phrase. zName is the "A" */ + Table *pTab; /* An SQL table corresponding to zName */ + Select *pSelect; /* A SELECT statement used in place of a table name */ + int addrFillSub; /* Address of subroutine to manifest a subquery */ + int regReturn; /* Register holding return address of addrFillSub */ + int regResult; /* Registers holding results of a co-routine */ + struct { + u8 jointype; /* Type of join between this table and the previous */ + unsigned notIndexed :1; /* True if there is a NOT INDEXED clause */ + unsigned isIndexedBy :1; /* True if there is an INDEXED BY clause */ + unsigned isTabFunc :1; /* True if table-valued-function syntax */ + unsigned isCorrelated :1; /* True if sub-query is correlated */ + unsigned viaCoroutine :1; /* Implemented as a co-routine */ + unsigned isRecursive :1; /* True for recursive reference in WITH */ + unsigned fromDDL :1; /* Comes from sqlite_master */ + } fg; + int iCursor; /* The VDBE cursor number used to access this table */ + Expr *pOn; /* The ON clause of a join */ + IdList *pUsing; /* The USING clause of a join */ + Bitmask colUsed; /* Bit N (1<" clause */ + ExprList *pFuncArg; /* Arguments to table-valued-function */ + } u1; + Index *pIBIndex; /* Index structure corresponding to u1.zIndexedBy */ + } a[1]; /* One entry for each identifier on the list */ +}; + +/* +** Permitted values of the SrcList.a.jointype field +*/ +#define JT_INNER 0x0001 /* Any kind of inner or cross join */ +#define JT_CROSS 0x0002 /* Explicit use of the CROSS keyword */ +#define JT_NATURAL 0x0004 /* True for a "natural" join */ +#define JT_LEFT 0x0008 /* Left outer join */ +#define JT_RIGHT 0x0010 /* Right outer join */ +#define JT_OUTER 0x0020 /* The "OUTER" keyword is present */ +#define JT_ERROR 0x0040 /* unknown or unsupported join type */ + + +/* +** Flags appropriate for the wctrlFlags parameter of sqlite3WhereBegin() +** and the WhereInfo.wctrlFlags member. +** +** Value constraints (enforced via assert()): +** WHERE_USE_LIMIT == SF_FixedLimit +*/ +#define WHERE_ORDERBY_NORMAL 0x0000 /* No-op */ +#define WHERE_ORDERBY_MIN 0x0001 /* ORDER BY processing for min() func */ +#define WHERE_ORDERBY_MAX 0x0002 /* ORDER BY processing for max() func */ +#define WHERE_ONEPASS_DESIRED 0x0004 /* Want to do one-pass UPDATE/DELETE */ +#define WHERE_ONEPASS_MULTIROW 0x0008 /* ONEPASS is ok with multiple rows */ +#define WHERE_DUPLICATES_OK 0x0010 /* Ok to return a row more than once */ +#define WHERE_OR_SUBCLAUSE 0x0020 /* Processing a sub-WHERE as part of + ** the OR optimization */ +#define WHERE_GROUPBY 0x0040 /* pOrderBy is really a GROUP BY */ +#define WHERE_DISTINCTBY 0x0080 /* pOrderby is really a DISTINCT clause */ +#define WHERE_WANT_DISTINCT 0x0100 /* All output needs to be distinct */ +#define WHERE_SORTBYGROUP 0x0200 /* Support sqlite3WhereIsSorted() */ +#define WHERE_SEEK_TABLE 0x0400 /* Do not defer seeks on main table */ +#define WHERE_ORDERBY_LIMIT 0x0800 /* ORDERBY+LIMIT on the inner loop */ +#define WHERE_SEEK_UNIQ_TABLE 0x1000 /* Do not defer seeks if unique */ + /* 0x2000 not currently used */ +#define WHERE_USE_LIMIT 0x4000 /* Use the LIMIT in cost estimates */ + /* 0x8000 not currently used */ + +/* Allowed return values from sqlite3WhereIsDistinct() +*/ +#define WHERE_DISTINCT_NOOP 0 /* DISTINCT keyword not used */ +#define WHERE_DISTINCT_UNIQUE 1 /* No duplicates */ +#define WHERE_DISTINCT_ORDERED 2 /* All duplicates are adjacent */ +#define WHERE_DISTINCT_UNORDERED 3 /* Duplicates are scattered */ + +/* +** A NameContext defines a context in which to resolve table and column +** names. The context consists of a list of tables (the pSrcList) field and +** a list of named expression (pEList). The named expression list may +** be NULL. The pSrc corresponds to the FROM clause of a SELECT or +** to the table being operated on by INSERT, UPDATE, or DELETE. The +** pEList corresponds to the result set of a SELECT and is NULL for +** other statements. +** +** NameContexts can be nested. When resolving names, the inner-most +** context is searched first. If no match is found, the next outer +** context is checked. If there is still no match, the next context +** is checked. This process continues until either a match is found +** or all contexts are check. When a match is found, the nRef member of +** the context containing the match is incremented. +** +** Each subquery gets a new NameContext. The pNext field points to the +** NameContext in the parent query. Thus the process of scanning the +** NameContext list corresponds to searching through successively outer +** subqueries looking for a match. +*/ +struct NameContext { + Parse *pParse; /* The parser */ + SrcList *pSrcList; /* One or more tables used to resolve names */ + union { + ExprList *pEList; /* Optional list of result-set columns */ + AggInfo *pAggInfo; /* Information about aggregates at this level */ + Upsert *pUpsert; /* ON CONFLICT clause information from an upsert */ + } uNC; + NameContext *pNext; /* Next outer name context. NULL for outermost */ + int nRef; /* Number of names resolved by this context */ + int nErr; /* Number of errors encountered while resolving names */ + int ncFlags; /* Zero or more NC_* flags defined below */ + Select *pWinSelect; /* SELECT statement for any window functions */ +}; + +/* +** Allowed values for the NameContext, ncFlags field. +** +** Value constraints (all checked via assert()): +** NC_HasAgg == SF_HasAgg == EP_Agg +** NC_MinMaxAgg == SF_MinMaxAgg == SQLITE_FUNC_MINMAX +** NC_HasWin == EP_Win +** +*/ +#define NC_AllowAgg 0x00001 /* Aggregate functions are allowed here */ +#define NC_PartIdx 0x00002 /* True if resolving a partial index WHERE */ +#define NC_IsCheck 0x00004 /* True if resolving a CHECK constraint */ +#define NC_GenCol 0x00008 /* True for a GENERATED ALWAYS AS clause */ +#define NC_HasAgg 0x00010 /* One or more aggregate functions seen */ +#define NC_IdxExpr 0x00020 /* True if resolving columns of CREATE INDEX */ +#define NC_SelfRef 0x0002e /* Combo: PartIdx, isCheck, GenCol, and IdxExpr */ +#define NC_VarSelect 0x00040 /* A correlated subquery has been seen */ +#define NC_UEList 0x00080 /* True if uNC.pEList is used */ +#define NC_UAggInfo 0x00100 /* True if uNC.pAggInfo is used */ +#define NC_UUpsert 0x00200 /* True if uNC.pUpsert is used */ +#define NC_MinMaxAgg 0x01000 /* min/max aggregates seen. See note above */ +#define NC_Complex 0x02000 /* True if a function or subquery seen */ +#define NC_AllowWin 0x04000 /* Window functions are allowed here */ +#define NC_HasWin 0x08000 /* One or more window functions seen */ +#define NC_IsDDL 0x10000 /* Resolving names in a CREATE statement */ +#define NC_InAggFunc 0x20000 /* True if analyzing arguments to an agg func */ +#define NC_FromDDL 0x40000 /* SQL text comes from sqlite_master */ + +/* +** An instance of the following object describes a single ON CONFLICT +** clause in an upsert. +** +** The pUpsertTarget field is only set if the ON CONFLICT clause includes +** conflict-target clause. (In "ON CONFLICT(a,b)" the "(a,b)" is the +** conflict-target clause.) The pUpsertTargetWhere is the optional +** WHERE clause used to identify partial unique indexes. +** +** pUpsertSet is the list of column=expr terms of the UPDATE statement. +** The pUpsertSet field is NULL for a ON CONFLICT DO NOTHING. The +** pUpsertWhere is the WHERE clause for the UPDATE and is NULL if the +** WHERE clause is omitted. +*/ +struct Upsert { + ExprList *pUpsertTarget; /* Optional description of conflicting index */ + Expr *pUpsertTargetWhere; /* WHERE clause for partial index targets */ + ExprList *pUpsertSet; /* The SET clause from an ON CONFLICT UPDATE */ + Expr *pUpsertWhere; /* WHERE clause for the ON CONFLICT UPDATE */ + /* The fields above comprise the parse tree for the upsert clause. + ** The fields below are used to transfer information from the INSERT + ** processing down into the UPDATE processing while generating code. + ** Upsert owns the memory allocated above, but not the memory below. */ + Index *pUpsertIdx; /* Constraint that pUpsertTarget identifies */ + SrcList *pUpsertSrc; /* Table to be updated */ + int regData; /* First register holding array of VALUES */ + int iDataCur; /* Index of the data cursor */ + int iIdxCur; /* Index of the first index cursor */ +}; + +/* +** An instance of the following structure contains all information +** needed to generate code for a single SELECT statement. +** +** See the header comment on the computeLimitRegisters() routine for a +** detailed description of the meaning of the iLimit and iOffset fields. +** +** addrOpenEphm[] entries contain the address of OP_OpenEphemeral opcodes. +** These addresses must be stored so that we can go back and fill in +** the P4_KEYINFO and P2 parameters later. Neither the KeyInfo nor +** the number of columns in P2 can be computed at the same time +** as the OP_OpenEphm instruction is coded because not +** enough information about the compound query is known at that point. +** The KeyInfo for addrOpenTran[0] and [1] contains collating sequences +** for the result set. The KeyInfo for addrOpenEphm[2] contains collating +** sequences for the ORDER BY clause. +*/ +struct Select { + u8 op; /* One of: TK_UNION TK_ALL TK_INTERSECT TK_EXCEPT */ + LogEst nSelectRow; /* Estimated number of result rows */ + u32 selFlags; /* Various SF_* values */ + int iLimit, iOffset; /* Memory registers holding LIMIT & OFFSET counters */ + u32 selId; /* Unique identifier number for this SELECT */ + int addrOpenEphm[2]; /* OP_OpenEphem opcodes related to this select */ + ExprList *pEList; /* The fields of the result */ + SrcList *pSrc; /* The FROM clause */ + Expr *pWhere; /* The WHERE clause */ + ExprList *pGroupBy; /* The GROUP BY clause */ + Expr *pHaving; /* The HAVING clause */ + ExprList *pOrderBy; /* The ORDER BY clause */ + Select *pPrior; /* Prior select in a compound select statement */ + Select *pNext; /* Next select to the left in a compound */ + Expr *pLimit; /* LIMIT expression. NULL means not used. */ + With *pWith; /* WITH clause attached to this select. Or NULL. */ +#ifndef SQLITE_OMIT_WINDOWFUNC + Window *pWin; /* List of window functions */ + Window *pWinDefn; /* List of named window definitions */ +#endif +}; + +/* +** Allowed values for Select.selFlags. The "SF" prefix stands for +** "Select Flag". +** +** Value constraints (all checked via assert()) +** SF_HasAgg == NC_HasAgg +** SF_MinMaxAgg == NC_MinMaxAgg == SQLITE_FUNC_MINMAX +** SF_FixedLimit == WHERE_USE_LIMIT +*/ +#define SF_Distinct 0x0000001 /* Output should be DISTINCT */ +#define SF_All 0x0000002 /* Includes the ALL keyword */ +#define SF_Resolved 0x0000004 /* Identifiers have been resolved */ +#define SF_Aggregate 0x0000008 /* Contains agg functions or a GROUP BY */ +#define SF_HasAgg 0x0000010 /* Contains aggregate functions */ +#define SF_UsesEphemeral 0x0000020 /* Uses the OpenEphemeral opcode */ +#define SF_Expanded 0x0000040 /* sqlite3SelectExpand() called on this */ +#define SF_HasTypeInfo 0x0000080 /* FROM subqueries have Table metadata */ +#define SF_Compound 0x0000100 /* Part of a compound query */ +#define SF_Values 0x0000200 /* Synthesized from VALUES clause */ +#define SF_MultiValue 0x0000400 /* Single VALUES term with multiple rows */ +#define SF_NestedFrom 0x0000800 /* Part of a parenthesized FROM clause */ +#define SF_MinMaxAgg 0x0001000 /* Aggregate containing min() or max() */ +#define SF_Recursive 0x0002000 /* The recursive part of a recursive CTE */ +#define SF_FixedLimit 0x0004000 /* nSelectRow set by a constant LIMIT */ +#define SF_MaybeConvert 0x0008000 /* Need convertCompoundSelectToSubquery() */ +#define SF_Converted 0x0010000 /* By convertCompoundSelectToSubquery() */ +#define SF_IncludeHidden 0x0020000 /* Include hidden columns in output */ +#define SF_ComplexResult 0x0040000 /* Result contains subquery or function */ +#define SF_WhereBegin 0x0080000 /* Really a WhereBegin() call. Debug Only */ +#define SF_WinRewrite 0x0100000 /* Window function rewrite accomplished */ +#define SF_View 0x0200000 /* SELECT statement is a view */ + +/* +** The results of a SELECT can be distributed in several ways, as defined +** by one of the following macros. The "SRT" prefix means "SELECT Result +** Type". +** +** SRT_Union Store results as a key in a temporary index +** identified by pDest->iSDParm. +** +** SRT_Except Remove results from the temporary index pDest->iSDParm. +** +** SRT_Exists Store a 1 in memory cell pDest->iSDParm if the result +** set is not empty. +** +** SRT_Discard Throw the results away. This is used by SELECT +** statements within triggers whose only purpose is +** the side-effects of functions. +** +** All of the above are free to ignore their ORDER BY clause. Those that +** follow must honor the ORDER BY clause. +** +** SRT_Output Generate a row of output (using the OP_ResultRow +** opcode) for each row in the result set. +** +** SRT_Mem Only valid if the result is a single column. +** Store the first column of the first result row +** in register pDest->iSDParm then abandon the rest +** of the query. This destination implies "LIMIT 1". +** +** SRT_Set The result must be a single column. Store each +** row of result as the key in table pDest->iSDParm. +** Apply the affinity pDest->affSdst before storing +** results. Used to implement "IN (SELECT ...)". +** +** SRT_EphemTab Create an temporary table pDest->iSDParm and store +** the result there. The cursor is left open after +** returning. This is like SRT_Table except that +** this destination uses OP_OpenEphemeral to create +** the table first. +** +** SRT_Coroutine Generate a co-routine that returns a new row of +** results each time it is invoked. The entry point +** of the co-routine is stored in register pDest->iSDParm +** and the result row is stored in pDest->nDest registers +** starting with pDest->iSdst. +** +** SRT_Table Store results in temporary table pDest->iSDParm. +** SRT_Fifo This is like SRT_EphemTab except that the table +** is assumed to already be open. SRT_Fifo has +** the additional property of being able to ignore +** the ORDER BY clause. +** +** SRT_DistFifo Store results in a temporary table pDest->iSDParm. +** But also use temporary table pDest->iSDParm+1 as +** a record of all prior results and ignore any duplicate +** rows. Name means: "Distinct Fifo". +** +** SRT_Queue Store results in priority queue pDest->iSDParm (really +** an index). Append a sequence number so that all entries +** are distinct. +** +** SRT_DistQueue Store results in priority queue pDest->iSDParm only if +** the same record has never been stored before. The +** index at pDest->iSDParm+1 hold all prior stores. +*/ +#define SRT_Union 1 /* Store result as keys in an index */ +#define SRT_Except 2 /* Remove result from a UNION index */ +#define SRT_Exists 3 /* Store 1 if the result is not empty */ +#define SRT_Discard 4 /* Do not save the results anywhere */ +#define SRT_Fifo 5 /* Store result as data with an automatic rowid */ +#define SRT_DistFifo 6 /* Like SRT_Fifo, but unique results only */ +#define SRT_Queue 7 /* Store result in an queue */ +#define SRT_DistQueue 8 /* Like SRT_Queue, but unique results only */ + +/* The ORDER BY clause is ignored for all of the above */ +#define IgnorableOrderby(X) ((X->eDest)<=SRT_DistQueue) + +#define SRT_Output 9 /* Output each row of result */ +#define SRT_Mem 10 /* Store result in a memory cell */ +#define SRT_Set 11 /* Store results as keys in an index */ +#define SRT_EphemTab 12 /* Create transient tab and store like SRT_Table */ +#define SRT_Coroutine 13 /* Generate a single row of result */ +#define SRT_Table 14 /* Store result as data with an automatic rowid */ + +/* +** An instance of this object describes where to put of the results of +** a SELECT statement. +*/ +struct SelectDest { + u8 eDest; /* How to dispose of the results. On of SRT_* above. */ + int iSDParm; /* A parameter used by the eDest disposal method */ + int iSdst; /* Base register where results are written */ + int nSdst; /* Number of registers allocated */ + char *zAffSdst; /* Affinity used when eDest==SRT_Set */ + ExprList *pOrderBy; /* Key columns for SRT_Queue and SRT_DistQueue */ +}; + +/* +** During code generation of statements that do inserts into AUTOINCREMENT +** tables, the following information is attached to the Table.u.autoInc.p +** pointer of each autoincrement table to record some side information that +** the code generator needs. We have to keep per-table autoincrement +** information in case inserts are done within triggers. Triggers do not +** normally coordinate their activities, but we do need to coordinate the +** loading and saving of autoincrement information. +*/ +struct AutoincInfo { + AutoincInfo *pNext; /* Next info block in a list of them all */ + Table *pTab; /* Table this info block refers to */ + int iDb; /* Index in sqlite3.aDb[] of database holding pTab */ + int regCtr; /* Memory register holding the rowid counter */ +}; + +/* +** At least one instance of the following structure is created for each +** trigger that may be fired while parsing an INSERT, UPDATE or DELETE +** statement. All such objects are stored in the linked list headed at +** Parse.pTriggerPrg and deleted once statement compilation has been +** completed. +** +** A Vdbe sub-program that implements the body and WHEN clause of trigger +** TriggerPrg.pTrigger, assuming a default ON CONFLICT clause of +** TriggerPrg.orconf, is stored in the TriggerPrg.pProgram variable. +** The Parse.pTriggerPrg list never contains two entries with the same +** values for both pTrigger and orconf. +** +** The TriggerPrg.aColmask[0] variable is set to a mask of old.* columns +** accessed (or set to 0 for triggers fired as a result of INSERT +** statements). Similarly, the TriggerPrg.aColmask[1] variable is set to +** a mask of new.* columns used by the program. +*/ +struct TriggerPrg { + Trigger *pTrigger; /* Trigger this program was coded from */ + TriggerPrg *pNext; /* Next entry in Parse.pTriggerPrg list */ + SubProgram *pProgram; /* Program implementing pTrigger/orconf */ + int orconf; /* Default ON CONFLICT policy */ + u32 aColmask[2]; /* Masks of old.*, new.* columns accessed */ +}; + +/* +** The yDbMask datatype for the bitmask of all attached databases. +*/ +#if SQLITE_MAX_ATTACHED>30 + typedef unsigned char yDbMask[(SQLITE_MAX_ATTACHED+9)/8]; +# define DbMaskTest(M,I) (((M)[(I)/8]&(1<<((I)&7)))!=0) +# define DbMaskZero(M) memset((M),0,sizeof(M)) +# define DbMaskSet(M,I) (M)[(I)/8]|=(1<<((I)&7)) +# define DbMaskAllZero(M) sqlite3DbMaskAllZero(M) +# define DbMaskNonZero(M) (sqlite3DbMaskAllZero(M)==0) +#else + typedef unsigned int yDbMask; +# define DbMaskTest(M,I) (((M)&(((yDbMask)1)<<(I)))!=0) +# define DbMaskZero(M) (M)=0 +# define DbMaskSet(M,I) (M)|=(((yDbMask)1)<<(I)) +# define DbMaskAllZero(M) (M)==0 +# define DbMaskNonZero(M) (M)!=0 +#endif + +/* +** An SQL parser context. A copy of this structure is passed through +** the parser and down into all the parser action routine in order to +** carry around information that is global to the entire parse. +** +** The structure is divided into two parts. When the parser and code +** generate call themselves recursively, the first part of the structure +** is constant but the second part is reset at the beginning and end of +** each recursion. +** +** The nTableLock and aTableLock variables are only used if the shared-cache +** feature is enabled (if sqlite3Tsd()->useSharedData is true). They are +** used to store the set of table-locks required by the statement being +** compiled. Function sqlite3TableLock() is used to add entries to the +** list. +*/ +struct Parse { + sqlite3 *db; /* The main database structure */ + char *zErrMsg; /* An error message */ + Vdbe *pVdbe; /* An engine for executing database bytecode */ + int rc; /* Return code from execution */ + u8 colNamesSet; /* TRUE after OP_ColumnName has been issued to pVdbe */ + u8 checkSchema; /* Causes schema cookie check after an error */ + u8 nested; /* Number of nested calls to the parser/code generator */ + u8 nTempReg; /* Number of temporary registers in aTempReg[] */ + u8 isMultiWrite; /* True if statement may modify/insert multiple rows */ + u8 mayAbort; /* True if statement may throw an ABORT exception */ + u8 hasCompound; /* Need to invoke convertCompoundSelectToSubquery() */ + u8 okConstFactor; /* OK to factor out constants */ + u8 disableLookaside; /* Number of times lookaside has been disabled */ + u8 disableVtab; /* Disable all virtual tables for this parse */ + int nRangeReg; /* Size of the temporary register block */ + int iRangeReg; /* First register in temporary register block */ + int nErr; /* Number of errors seen */ + int nTab; /* Number of previously allocated VDBE cursors */ + int nMem; /* Number of memory cells used so far */ + int szOpAlloc; /* Bytes of memory space allocated for Vdbe.aOp[] */ + int iSelfTab; /* Table associated with an index on expr, or negative + ** of the base register during check-constraint eval */ + int nLabel; /* The *negative* of the number of labels used */ + int nLabelAlloc; /* Number of slots in aLabel */ + int *aLabel; /* Space to hold the labels */ + ExprList *pConstExpr;/* Constant expressions */ + Token constraintName;/* Name of the constraint currently being parsed */ + yDbMask writeMask; /* Start a write transaction on these databases */ + yDbMask cookieMask; /* Bitmask of schema verified databases */ + int regRowid; /* Register holding rowid of CREATE TABLE entry */ + int regRoot; /* Register holding root page number for new objects */ + int nMaxArg; /* Max args passed to user function by sub-program */ + int nSelect; /* Number of SELECT stmts. Counter for Select.selId */ +#ifndef SQLITE_OMIT_SHARED_CACHE + int nTableLock; /* Number of locks in aTableLock */ + TableLock *aTableLock; /* Required table locks for shared-cache mode */ +#endif + AutoincInfo *pAinc; /* Information about AUTOINCREMENT counters */ + Parse *pToplevel; /* Parse structure for main program (or NULL) */ + Table *pTriggerTab; /* Table triggers are being coded for */ + Parse *pParentParse; /* Parent parser if this parser is nested */ + int addrCrTab; /* Address of OP_CreateBtree opcode on CREATE TABLE */ + u32 nQueryLoop; /* Est number of iterations of a query (10*log2(N)) */ + u32 oldmask; /* Mask of old.* columns referenced */ + u32 newmask; /* Mask of new.* columns referenced */ + u8 eTriggerOp; /* TK_UPDATE, TK_INSERT or TK_DELETE */ + u8 eOrconf; /* Default ON CONFLICT policy for trigger steps */ + u8 disableTriggers; /* True to disable triggers */ + + /************************************************************************** + ** Fields above must be initialized to zero. The fields that follow, + ** down to the beginning of the recursive section, do not need to be + ** initialized as they will be set before being used. The boundary is + ** determined by offsetof(Parse,aTempReg). + **************************************************************************/ + + int aTempReg[8]; /* Holding area for temporary registers */ + Token sNameToken; /* Token with unqualified schema object name */ + + /************************************************************************ + ** Above is constant between recursions. Below is reset before and after + ** each recursion. The boundary between these two regions is determined + ** using offsetof(Parse,sLastToken) so the sLastToken field must be the + ** first field in the recursive region. + ************************************************************************/ + + Token sLastToken; /* The last token parsed */ + ynVar nVar; /* Number of '?' variables seen in the SQL so far */ + u8 iPkSortOrder; /* ASC or DESC for INTEGER PRIMARY KEY */ + u8 explain; /* True if the EXPLAIN flag is found on the query */ +#if !(defined(SQLITE_OMIT_VIRTUALTABLE) && defined(SQLITE_OMIT_ALTERTABLE)) + u8 eParseMode; /* PARSE_MODE_XXX constant */ +#endif +#ifndef SQLITE_OMIT_VIRTUALTABLE + int nVtabLock; /* Number of virtual tables to lock */ +#endif + int nHeight; /* Expression tree height of current sub-select */ +#ifndef SQLITE_OMIT_EXPLAIN + int addrExplain; /* Address of current OP_Explain opcode */ +#endif + VList *pVList; /* Mapping between variable names and numbers */ + Vdbe *pReprepare; /* VM being reprepared (sqlite3Reprepare()) */ + const char *zTail; /* All SQL text past the last semicolon parsed */ + Table *pNewTable; /* A table being constructed by CREATE TABLE */ + Index *pNewIndex; /* An index being constructed by CREATE INDEX. + ** Also used to hold redundant UNIQUE constraints + ** during a RENAME COLUMN */ + Trigger *pNewTrigger; /* Trigger under construct by a CREATE TRIGGER */ + const char *zAuthContext; /* The 6th parameter to db->xAuth callbacks */ +#ifndef SQLITE_OMIT_VIRTUALTABLE + Token sArg; /* Complete text of a module argument */ + Table **apVtabLock; /* Pointer to virtual tables needing locking */ +#endif + Table *pZombieTab; /* List of Table objects to delete after code gen */ + TriggerPrg *pTriggerPrg; /* Linked list of coded triggers */ + With *pWith; /* Current WITH clause, or NULL */ + With *pWithToFree; /* Free this WITH object at the end of the parse */ +#ifndef SQLITE_OMIT_ALTERTABLE + RenameToken *pRename; /* Tokens subject to renaming by ALTER TABLE */ +#endif +}; + +#define PARSE_MODE_NORMAL 0 +#define PARSE_MODE_DECLARE_VTAB 1 +#define PARSE_MODE_RENAME 2 +#define PARSE_MODE_UNMAP 3 + +/* +** Sizes and pointers of various parts of the Parse object. +*/ +#define PARSE_HDR_SZ offsetof(Parse,aTempReg) /* Recursive part w/o aColCache*/ +#define PARSE_RECURSE_SZ offsetof(Parse,sLastToken) /* Recursive part */ +#define PARSE_TAIL_SZ (sizeof(Parse)-PARSE_RECURSE_SZ) /* Non-recursive part */ +#define PARSE_TAIL(X) (((char*)(X))+PARSE_RECURSE_SZ) /* Pointer to tail */ + +/* +** Return true if currently inside an sqlite3_declare_vtab() call. +*/ +#ifdef SQLITE_OMIT_VIRTUALTABLE + #define IN_DECLARE_VTAB 0 +#else + #define IN_DECLARE_VTAB (pParse->eParseMode==PARSE_MODE_DECLARE_VTAB) +#endif + +#if defined(SQLITE_OMIT_ALTERTABLE) + #define IN_RENAME_OBJECT 0 +#else + #define IN_RENAME_OBJECT (pParse->eParseMode>=PARSE_MODE_RENAME) +#endif + +#if defined(SQLITE_OMIT_VIRTUALTABLE) && defined(SQLITE_OMIT_ALTERTABLE) + #define IN_SPECIAL_PARSE 0 +#else + #define IN_SPECIAL_PARSE (pParse->eParseMode!=PARSE_MODE_NORMAL) +#endif + +/* +** An instance of the following structure can be declared on a stack and used +** to save the Parse.zAuthContext value so that it can be restored later. +*/ +struct AuthContext { + const char *zAuthContext; /* Put saved Parse.zAuthContext here */ + Parse *pParse; /* The Parse structure */ +}; + +/* +** Bitfield flags for P5 value in various opcodes. +** +** Value constraints (enforced via assert()): +** OPFLAG_LENGTHARG == SQLITE_FUNC_LENGTH +** OPFLAG_TYPEOFARG == SQLITE_FUNC_TYPEOF +** OPFLAG_BULKCSR == BTREE_BULKLOAD +** OPFLAG_SEEKEQ == BTREE_SEEK_EQ +** OPFLAG_FORDELETE == BTREE_FORDELETE +** OPFLAG_SAVEPOSITION == BTREE_SAVEPOSITION +** OPFLAG_AUXDELETE == BTREE_AUXDELETE +*/ +#define OPFLAG_NCHANGE 0x01 /* OP_Insert: Set to update db->nChange */ + /* Also used in P2 (not P5) of OP_Delete */ +#define OPFLAG_NOCHNG 0x01 /* OP_VColumn nochange for UPDATE */ +#define OPFLAG_EPHEM 0x01 /* OP_Column: Ephemeral output is ok */ +#define OPFLAG_LASTROWID 0x20 /* Set to update db->lastRowid */ +#define OPFLAG_ISUPDATE 0x04 /* This OP_Insert is an sql UPDATE */ +#define OPFLAG_APPEND 0x08 /* This is likely to be an append */ +#define OPFLAG_USESEEKRESULT 0x10 /* Try to avoid a seek in BtreeInsert() */ +#define OPFLAG_ISNOOP 0x40 /* OP_Delete does pre-update-hook only */ +#define OPFLAG_LENGTHARG 0x40 /* OP_Column only used for length() */ +#define OPFLAG_TYPEOFARG 0x80 /* OP_Column only used for typeof() */ +#define OPFLAG_BULKCSR 0x01 /* OP_Open** used to open bulk cursor */ +#define OPFLAG_SEEKEQ 0x02 /* OP_Open** cursor uses EQ seek only */ +#define OPFLAG_FORDELETE 0x08 /* OP_Open should use BTREE_FORDELETE */ +#define OPFLAG_P2ISREG 0x10 /* P2 to OP_Open** is a register number */ +#define OPFLAG_PERMUTE 0x01 /* OP_Compare: use the permutation */ +#define OPFLAG_SAVEPOSITION 0x02 /* OP_Delete/Insert: save cursor pos */ +#define OPFLAG_AUXDELETE 0x04 /* OP_Delete: index in a DELETE op */ +#define OPFLAG_NOCHNG_MAGIC 0x6d /* OP_MakeRecord: serialtype 10 is ok */ + +/* + * Each trigger present in the database schema is stored as an instance of + * struct Trigger. + * + * Pointers to instances of struct Trigger are stored in two ways. + * 1. In the "trigHash" hash table (part of the sqlite3* that represents the + * database). This allows Trigger structures to be retrieved by name. + * 2. All triggers associated with a single table form a linked list, using the + * pNext member of struct Trigger. A pointer to the first element of the + * linked list is stored as the "pTrigger" member of the associated + * struct Table. + * + * The "step_list" member points to the first element of a linked list + * containing the SQL statements specified as the trigger program. + */ +struct Trigger { + char *zName; /* The name of the trigger */ + char *table; /* The table or view to which the trigger applies */ + u8 op; /* One of TK_DELETE, TK_UPDATE, TK_INSERT */ + u8 tr_tm; /* One of TRIGGER_BEFORE, TRIGGER_AFTER */ + Expr *pWhen; /* The WHEN clause of the expression (may be NULL) */ + IdList *pColumns; /* If this is an UPDATE OF trigger, + the is stored here */ + Schema *pSchema; /* Schema containing the trigger */ + Schema *pTabSchema; /* Schema containing the table */ + TriggerStep *step_list; /* Link list of trigger program steps */ + Trigger *pNext; /* Next trigger associated with the table */ +}; + +/* +** A trigger is either a BEFORE or an AFTER trigger. The following constants +** determine which. +** +** If there are multiple triggers, you might of some BEFORE and some AFTER. +** In that cases, the constants below can be ORed together. +*/ +#define TRIGGER_BEFORE 1 +#define TRIGGER_AFTER 2 + +/* + * An instance of struct TriggerStep is used to store a single SQL statement + * that is a part of a trigger-program. + * + * Instances of struct TriggerStep are stored in a singly linked list (linked + * using the "pNext" member) referenced by the "step_list" member of the + * associated struct Trigger instance. The first element of the linked list is + * the first step of the trigger-program. + * + * The "op" member indicates whether this is a "DELETE", "INSERT", "UPDATE" or + * "SELECT" statement. The meanings of the other members is determined by the + * value of "op" as follows: + * + * (op == TK_INSERT) + * orconf -> stores the ON CONFLICT algorithm + * pSelect -> If this is an INSERT INTO ... SELECT ... statement, then + * this stores a pointer to the SELECT statement. Otherwise NULL. + * zTarget -> Dequoted name of the table to insert into. + * pExprList -> If this is an INSERT INTO ... VALUES ... statement, then + * this stores values to be inserted. Otherwise NULL. + * pIdList -> If this is an INSERT INTO ... () VALUES ... + * statement, then this stores the column-names to be + * inserted into. + * + * (op == TK_DELETE) + * zTarget -> Dequoted name of the table to delete from. + * pWhere -> The WHERE clause of the DELETE statement if one is specified. + * Otherwise NULL. + * + * (op == TK_UPDATE) + * zTarget -> Dequoted name of the table to update. + * pWhere -> The WHERE clause of the UPDATE statement if one is specified. + * Otherwise NULL. + * pExprList -> A list of the columns to update and the expressions to update + * them to. See sqlite3Update() documentation of "pChanges" + * argument. + * + */ +struct TriggerStep { + u8 op; /* One of TK_DELETE, TK_UPDATE, TK_INSERT, TK_SELECT */ + u8 orconf; /* OE_Rollback etc. */ + Trigger *pTrig; /* The trigger that this step is a part of */ + Select *pSelect; /* SELECT statement or RHS of INSERT INTO SELECT ... */ + char *zTarget; /* Target table for DELETE, UPDATE, INSERT */ + Expr *pWhere; /* The WHERE clause for DELETE or UPDATE steps */ + ExprList *pExprList; /* SET clause for UPDATE */ + IdList *pIdList; /* Column names for INSERT */ + Upsert *pUpsert; /* Upsert clauses on an INSERT */ + char *zSpan; /* Original SQL text of this command */ + TriggerStep *pNext; /* Next in the link-list */ + TriggerStep *pLast; /* Last element in link-list. Valid for 1st elem only */ +}; + +/* +** The following structure contains information used by the sqliteFix... +** routines as they walk the parse tree to make database references +** explicit. +*/ +typedef struct DbFixer DbFixer; +struct DbFixer { + Parse *pParse; /* The parsing context. Error messages written here */ + Schema *pSchema; /* Fix items to this schema */ + u8 bTemp; /* True for TEMP schema entries */ + const char *zDb; /* Make sure all objects are contained in this database */ + const char *zType; /* Type of the container - used for error messages */ + const Token *pName; /* Name of the container - used for error messages */ +}; + +/* +** An objected used to accumulate the text of a string where we +** do not necessarily know how big the string will be in the end. +*/ +struct sqlite3_str { + sqlite3 *db; /* Optional database for lookaside. Can be NULL */ + char *zText; /* The string collected so far */ + u32 nAlloc; /* Amount of space allocated in zText */ + u32 mxAlloc; /* Maximum allowed allocation. 0 for no malloc usage */ + u32 nChar; /* Length of the string so far */ + u8 accError; /* SQLITE_NOMEM or SQLITE_TOOBIG */ + u8 printfFlags; /* SQLITE_PRINTF flags below */ +}; +#define SQLITE_PRINTF_INTERNAL 0x01 /* Internal-use-only converters allowed */ +#define SQLITE_PRINTF_SQLFUNC 0x02 /* SQL function arguments to VXPrintf */ +#define SQLITE_PRINTF_MALLOCED 0x04 /* True if xText is allocated space */ + +#define isMalloced(X) (((X)->printfFlags & SQLITE_PRINTF_MALLOCED)!=0) + + +/* +** A pointer to this structure is used to communicate information +** from sqlite3Init and OP_ParseSchema into the sqlite3InitCallback. +*/ +typedef struct { + sqlite3 *db; /* The database being initialized */ + char **pzErrMsg; /* Error message stored here */ + int iDb; /* 0 for main database. 1 for TEMP, 2.. for ATTACHed */ + int rc; /* Result code stored here */ + u32 mInitFlags; /* Flags controlling error messages */ + u32 nInitRow; /* Number of rows processed */ +} InitData; + +/* +** Allowed values for mInitFlags +*/ +#define INITFLAG_AlterTable 0x0001 /* This is a reparse after ALTER TABLE */ + +/* +** Structure containing global configuration data for the SQLite library. +** +** This structure also contains some state information. +*/ +struct Sqlite3Config { + int bMemstat; /* True to enable memory status */ + u8 bCoreMutex; /* True to enable core mutexing */ + u8 bFullMutex; /* True to enable full mutexing */ + u8 bOpenUri; /* True to interpret filenames as URIs */ + u8 bUseCis; /* Use covering indices for full-scans */ + u8 bSmallMalloc; /* Avoid large memory allocations if true */ + u8 bExtraSchemaChecks; /* Verify type,name,tbl_name in schema */ + int mxStrlen; /* Maximum string length */ + int neverCorrupt; /* Database is always well-formed */ + int szLookaside; /* Default lookaside buffer size */ + int nLookaside; /* Default lookaside buffer count */ + int nStmtSpill; /* Stmt-journal spill-to-disk threshold */ + sqlite3_mem_methods m; /* Low-level memory allocation interface */ + sqlite3_mutex_methods mutex; /* Low-level mutex interface */ + sqlite3_pcache_methods2 pcache2; /* Low-level page-cache interface */ + void *pHeap; /* Heap storage space */ + int nHeap; /* Size of pHeap[] */ + int mnReq, mxReq; /* Min and max heap requests sizes */ + sqlite3_int64 szMmap; /* mmap() space per open file */ + sqlite3_int64 mxMmap; /* Maximum value for szMmap */ + void *pPage; /* Page cache memory */ + int szPage; /* Size of each page in pPage[] */ + int nPage; /* Number of pages in pPage[] */ + int mxParserStack; /* maximum depth of the parser stack */ + int sharedCacheEnabled; /* true if shared-cache mode enabled */ + u32 szPma; /* Maximum Sorter PMA size */ + /* The above might be initialized to non-zero. The following need to always + ** initially be zero, however. */ + int isInit; /* True after initialization has finished */ + int inProgress; /* True while initialization in progress */ + int isMutexInit; /* True after mutexes are initialized */ + int isMallocInit; /* True after malloc is initialized */ + int isPCacheInit; /* True after malloc is initialized */ + int nRefInitMutex; /* Number of users of pInitMutex */ + sqlite3_mutex *pInitMutex; /* Mutex used by sqlite3_initialize() */ + void (*xLog)(void*,int,const char*); /* Function for logging */ + void *pLogArg; /* First argument to xLog() */ +#ifdef SQLITE_ENABLE_SQLLOG + void(*xSqllog)(void*,sqlite3*,const char*, int); + void *pSqllogArg; +#endif +#ifdef SQLITE_VDBE_COVERAGE + /* The following callback (if not NULL) is invoked on every VDBE branch + ** operation. Set the callback using SQLITE_TESTCTRL_VDBE_COVERAGE. + */ + void (*xVdbeBranch)(void*,unsigned iSrcLine,u8 eThis,u8 eMx); /* Callback */ + void *pVdbeBranchArg; /* 1st argument */ +#endif +#ifdef SQLITE_ENABLE_DESERIALIZE + sqlite3_int64 mxMemdbSize; /* Default max memdb size */ +#endif +#ifndef SQLITE_UNTESTABLE + int (*xTestCallback)(int); /* Invoked by sqlite3FaultSim() */ +#endif + int bLocaltimeFault; /* True to fail localtime() calls */ + int iOnceResetThreshold; /* When to reset OP_Once counters */ + u32 szSorterRef; /* Min size in bytes to use sorter-refs */ + unsigned int iPrngSeed; /* Alternative fixed seed for the PRNG */ +}; + +/* +** This macro is used inside of assert() statements to indicate that +** the assert is only valid on a well-formed database. Instead of: +** +** assert( X ); +** +** One writes: +** +** assert( X || CORRUPT_DB ); +** +** CORRUPT_DB is true during normal operation. CORRUPT_DB does not indicate +** that the database is definitely corrupt, only that it might be corrupt. +** For most test cases, CORRUPT_DB is set to false using a special +** sqlite3_test_control(). This enables assert() statements to prove +** things that are always true for well-formed databases. +*/ +#define CORRUPT_DB (sqlite3Config.neverCorrupt==0) + +/* +** Context pointer passed down through the tree-walk. +*/ +struct Walker { + Parse *pParse; /* Parser context. */ + int (*xExprCallback)(Walker*, Expr*); /* Callback for expressions */ + int (*xSelectCallback)(Walker*,Select*); /* Callback for SELECTs */ + void (*xSelectCallback2)(Walker*,Select*);/* Second callback for SELECTs */ + int walkerDepth; /* Number of subqueries */ + u16 eCode; /* A small processing code */ + union { /* Extra data for callback */ + NameContext *pNC; /* Naming context */ + int n; /* A counter */ + int iCur; /* A cursor number */ + SrcList *pSrcList; /* FROM clause */ + struct SrcCount *pSrcCount; /* Counting column references */ + struct CCurHint *pCCurHint; /* Used by codeCursorHint() */ + int *aiCol; /* array of column indexes */ + struct IdxCover *pIdxCover; /* Check for index coverage */ + struct IdxExprTrans *pIdxTrans; /* Convert idxed expr to column */ + ExprList *pGroupBy; /* GROUP BY clause */ + Select *pSelect; /* HAVING to WHERE clause ctx */ + struct WindowRewrite *pRewrite; /* Window rewrite context */ + struct WhereConst *pConst; /* WHERE clause constants */ + struct RenameCtx *pRename; /* RENAME COLUMN context */ + struct Table *pTab; /* Table of generated column */ + struct SrcList_item *pSrcItem; /* A single FROM clause item */ + } u; +}; + +/* Forward declarations */ +int sqlite3WalkExpr(Walker*, Expr*); +int sqlite3WalkExprList(Walker*, ExprList*); +int sqlite3WalkSelect(Walker*, Select*); +int sqlite3WalkSelectExpr(Walker*, Select*); +int sqlite3WalkSelectFrom(Walker*, Select*); +int sqlite3ExprWalkNoop(Walker*, Expr*); +int sqlite3SelectWalkNoop(Walker*, Select*); +int sqlite3SelectWalkFail(Walker*, Select*); +int sqlite3WalkerDepthIncrease(Walker*,Select*); +void sqlite3WalkerDepthDecrease(Walker*,Select*); + +#ifdef SQLITE_DEBUG +void sqlite3SelectWalkAssert2(Walker*, Select*); +#endif + +/* +** Return code from the parse-tree walking primitives and their +** callbacks. +*/ +#define WRC_Continue 0 /* Continue down into children */ +#define WRC_Prune 1 /* Omit children but continue walking siblings */ +#define WRC_Abort 2 /* Abandon the tree walk */ + +/* +** An instance of this structure represents a set of one or more CTEs +** (common table expressions) created by a single WITH clause. +*/ +struct With { + int nCte; /* Number of CTEs in the WITH clause */ + With *pOuter; /* Containing WITH clause, or NULL */ + struct Cte { /* For each CTE in the WITH clause.... */ + char *zName; /* Name of this CTE */ + ExprList *pCols; /* List of explicit column names, or NULL */ + Select *pSelect; /* The definition of this CTE */ + const char *zCteErr; /* Error message for circular references */ + } a[1]; +}; + +#ifdef SQLITE_DEBUG +/* +** An instance of the TreeView object is used for printing the content of +** data structures on sqlite3DebugPrintf() using a tree-like view. +*/ +struct TreeView { + int iLevel; /* Which level of the tree we are on */ + u8 bLine[100]; /* Draw vertical in column i if bLine[i] is true */ +}; +#endif /* SQLITE_DEBUG */ + +/* +** This object is used in various ways, most (but not all) related to window +** functions. +** +** (1) A single instance of this structure is attached to the +** the Expr.y.pWin field for each window function in an expression tree. +** This object holds the information contained in the OVER clause, +** plus additional fields used during code generation. +** +** (2) All window functions in a single SELECT form a linked-list +** attached to Select.pWin. The Window.pFunc and Window.pExpr +** fields point back to the expression that is the window function. +** +** (3) The terms of the WINDOW clause of a SELECT are instances of this +** object on a linked list attached to Select.pWinDefn. +** +** (4) For an aggregate function with a FILTER clause, an instance +** of this object is stored in Expr.y.pWin with eFrmType set to +** TK_FILTER. In this case the only field used is Window.pFilter. +** +** The uses (1) and (2) are really the same Window object that just happens +** to be accessible in two different ways. Use case (3) are separate objects. +*/ +struct Window { + char *zName; /* Name of window (may be NULL) */ + char *zBase; /* Name of base window for chaining (may be NULL) */ + ExprList *pPartition; /* PARTITION BY clause */ + ExprList *pOrderBy; /* ORDER BY clause */ + u8 eFrmType; /* TK_RANGE, TK_GROUPS, TK_ROWS, or 0 */ + u8 eStart; /* UNBOUNDED, CURRENT, PRECEDING or FOLLOWING */ + u8 eEnd; /* UNBOUNDED, CURRENT, PRECEDING or FOLLOWING */ + u8 bImplicitFrame; /* True if frame was implicitly specified */ + u8 eExclude; /* TK_NO, TK_CURRENT, TK_TIES, TK_GROUP, or 0 */ + Expr *pStart; /* Expression for " PRECEDING" */ + Expr *pEnd; /* Expression for " FOLLOWING" */ + Window **ppThis; /* Pointer to this object in Select.pWin list */ + Window *pNextWin; /* Next window function belonging to this SELECT */ + Expr *pFilter; /* The FILTER expression */ + FuncDef *pFunc; /* The function */ + int iEphCsr; /* Partition buffer or Peer buffer */ + int regAccum; /* Accumulator */ + int regResult; /* Interim result */ + int csrApp; /* Function cursor (used by min/max) */ + int regApp; /* Function register (also used by min/max) */ + int regPart; /* Array of registers for PARTITION BY values */ + Expr *pOwner; /* Expression object this window is attached to */ + int nBufferCol; /* Number of columns in buffer table */ + int iArgCol; /* Offset of first argument for this function */ + int regOne; /* Register containing constant value 1 */ + int regStartRowid; + int regEndRowid; + u8 bExprArgs; /* Defer evaluation of window function arguments + ** due to the SQLITE_SUBTYPE flag */ +}; + +#ifndef SQLITE_OMIT_WINDOWFUNC +void sqlite3WindowDelete(sqlite3*, Window*); +void sqlite3WindowUnlinkFromSelect(Window*); +void sqlite3WindowListDelete(sqlite3 *db, Window *p); +Window *sqlite3WindowAlloc(Parse*, int, int, Expr*, int , Expr*, u8); +void sqlite3WindowAttach(Parse*, Expr*, Window*); +void sqlite3WindowLink(Select *pSel, Window *pWin); +int sqlite3WindowCompare(Parse*, Window*, Window*, int); +void sqlite3WindowCodeInit(Parse*, Select*); +void sqlite3WindowCodeStep(Parse*, Select*, WhereInfo*, int, int); +int sqlite3WindowRewrite(Parse*, Select*); +int sqlite3ExpandSubquery(Parse*, struct SrcList_item*); +void sqlite3WindowUpdate(Parse*, Window*, Window*, FuncDef*); +Window *sqlite3WindowDup(sqlite3 *db, Expr *pOwner, Window *p); +Window *sqlite3WindowListDup(sqlite3 *db, Window *p); +void sqlite3WindowFunctions(void); +void sqlite3WindowChain(Parse*, Window*, Window*); +Window *sqlite3WindowAssemble(Parse*, Window*, ExprList*, ExprList*, Token*); +#else +# define sqlite3WindowDelete(a,b) +# define sqlite3WindowFunctions() +# define sqlite3WindowAttach(a,b,c) +#endif + +/* +** Assuming zIn points to the first byte of a UTF-8 character, +** advance zIn to point to the first byte of the next UTF-8 character. +*/ +#define SQLITE_SKIP_UTF8(zIn) { \ + if( (*(zIn++))>=0xc0 ){ \ + while( (*zIn & 0xc0)==0x80 ){ zIn++; } \ + } \ +} + +/* +** The SQLITE_*_BKPT macros are substitutes for the error codes with +** the same name but without the _BKPT suffix. These macros invoke +** routines that report the line-number on which the error originated +** using sqlite3_log(). The routines also provide a convenient place +** to set a debugger breakpoint. +*/ +int sqlite3ReportError(int iErr, int lineno, const char *zType); +int sqlite3CorruptError(int); +int sqlite3MisuseError(int); +int sqlite3CantopenError(int); +#define SQLITE_CORRUPT_BKPT sqlite3CorruptError(__LINE__) +#define SQLITE_MISUSE_BKPT sqlite3MisuseError(__LINE__) +#define SQLITE_CANTOPEN_BKPT sqlite3CantopenError(__LINE__) +#ifdef SQLITE_DEBUG + int sqlite3NomemError(int); + int sqlite3IoerrnomemError(int); +# define SQLITE_NOMEM_BKPT sqlite3NomemError(__LINE__) +# define SQLITE_IOERR_NOMEM_BKPT sqlite3IoerrnomemError(__LINE__) +#else +# define SQLITE_NOMEM_BKPT SQLITE_NOMEM +# define SQLITE_IOERR_NOMEM_BKPT SQLITE_IOERR_NOMEM +#endif +#if defined(SQLITE_DEBUG) || defined(SQLITE_ENABLE_CORRUPT_PGNO) + int sqlite3CorruptPgnoError(int,Pgno); +# define SQLITE_CORRUPT_PGNO(P) sqlite3CorruptPgnoError(__LINE__,(P)) +#else +# define SQLITE_CORRUPT_PGNO(P) sqlite3CorruptError(__LINE__) +#endif + +/* +** FTS3 and FTS4 both require virtual table support +*/ +#if defined(SQLITE_OMIT_VIRTUALTABLE) +# undef SQLITE_ENABLE_FTS3 +# undef SQLITE_ENABLE_FTS4 +#endif + +/* +** FTS4 is really an extension for FTS3. It is enabled using the +** SQLITE_ENABLE_FTS3 macro. But to avoid confusion we also call +** the SQLITE_ENABLE_FTS4 macro to serve as an alias for SQLITE_ENABLE_FTS3. +*/ +#if defined(SQLITE_ENABLE_FTS4) && !defined(SQLITE_ENABLE_FTS3) +# define SQLITE_ENABLE_FTS3 1 +#endif + +/* +** The ctype.h header is needed for non-ASCII systems. It is also +** needed by FTS3 when FTS3 is included in the amalgamation. +*/ +#if !defined(SQLITE_ASCII) || \ + (defined(SQLITE_ENABLE_FTS3) && defined(SQLITE_AMALGAMATION)) +# include +#endif + +/* +** The following macros mimic the standard library functions toupper(), +** isspace(), isalnum(), isdigit() and isxdigit(), respectively. The +** sqlite versions only work for ASCII characters, regardless of locale. +*/ +#ifdef SQLITE_ASCII +# define sqlite3Toupper(x) ((x)&~(sqlite3CtypeMap[(unsigned char)(x)]&0x20)) +# define sqlite3Isspace(x) (sqlite3CtypeMap[(unsigned char)(x)]&0x01) +# define sqlite3Isalnum(x) (sqlite3CtypeMap[(unsigned char)(x)]&0x06) +# define sqlite3Isalpha(x) (sqlite3CtypeMap[(unsigned char)(x)]&0x02) +# define sqlite3Isdigit(x) (sqlite3CtypeMap[(unsigned char)(x)]&0x04) +# define sqlite3Isxdigit(x) (sqlite3CtypeMap[(unsigned char)(x)]&0x08) +# define sqlite3Tolower(x) (sqlite3UpperToLower[(unsigned char)(x)]) +# define sqlite3Isquote(x) (sqlite3CtypeMap[(unsigned char)(x)]&0x80) +#else +# define sqlite3Toupper(x) toupper((unsigned char)(x)) +# define sqlite3Isspace(x) isspace((unsigned char)(x)) +# define sqlite3Isalnum(x) isalnum((unsigned char)(x)) +# define sqlite3Isalpha(x) isalpha((unsigned char)(x)) +# define sqlite3Isdigit(x) isdigit((unsigned char)(x)) +# define sqlite3Isxdigit(x) isxdigit((unsigned char)(x)) +# define sqlite3Tolower(x) tolower((unsigned char)(x)) +# define sqlite3Isquote(x) ((x)=='"'||(x)=='\''||(x)=='['||(x)=='`') +#endif +int sqlite3IsIdChar(u8); + +/* +** Internal function prototypes +*/ +int sqlite3StrICmp(const char*,const char*); +int sqlite3Strlen30(const char*); +#define sqlite3Strlen30NN(C) (strlen(C)&0x3fffffff) +char *sqlite3ColumnType(Column*,char*); +#define sqlite3StrNICmp sqlite3_strnicmp + +int sqlite3MallocInit(void); +void sqlite3MallocEnd(void); +void *sqlite3Malloc(u64); +void *sqlite3MallocZero(u64); +void *sqlite3DbMallocZero(sqlite3*, u64); +void *sqlite3DbMallocRaw(sqlite3*, u64); +void *sqlite3DbMallocRawNN(sqlite3*, u64); +char *sqlite3DbStrDup(sqlite3*,const char*); +char *sqlite3DbStrNDup(sqlite3*,const char*, u64); +char *sqlite3DbSpanDup(sqlite3*,const char*,const char*); +void *sqlite3Realloc(void*, u64); +void *sqlite3DbReallocOrFree(sqlite3 *, void *, u64); +void *sqlite3DbRealloc(sqlite3 *, void *, u64); +void sqlite3DbFree(sqlite3*, void*); +void sqlite3DbFreeNN(sqlite3*, void*); +int sqlite3MallocSize(void*); +int sqlite3DbMallocSize(sqlite3*, void*); +void *sqlite3PageMalloc(int); +void sqlite3PageFree(void*); +void sqlite3MemSetDefault(void); +#ifndef SQLITE_UNTESTABLE +void sqlite3BenignMallocHooks(void (*)(void), void (*)(void)); +#endif +int sqlite3HeapNearlyFull(void); + +/* +** On systems with ample stack space and that support alloca(), make +** use of alloca() to obtain space for large automatic objects. By default, +** obtain space from malloc(). +** +** The alloca() routine never returns NULL. This will cause code paths +** that deal with sqlite3StackAlloc() failures to be unreachable. +*/ +#ifdef SQLITE_USE_ALLOCA +# define sqlite3StackAllocRaw(D,N) alloca(N) +# define sqlite3StackAllocZero(D,N) memset(alloca(N), 0, N) +# define sqlite3StackFree(D,P) +#else +# define sqlite3StackAllocRaw(D,N) sqlite3DbMallocRaw(D,N) +# define sqlite3StackAllocZero(D,N) sqlite3DbMallocZero(D,N) +# define sqlite3StackFree(D,P) sqlite3DbFree(D,P) +#endif + +/* Do not allow both MEMSYS5 and MEMSYS3 to be defined together. If they +** are, disable MEMSYS3 +*/ +#ifdef SQLITE_ENABLE_MEMSYS5 +const sqlite3_mem_methods *sqlite3MemGetMemsys5(void); +#undef SQLITE_ENABLE_MEMSYS3 +#endif +#ifdef SQLITE_ENABLE_MEMSYS3 +const sqlite3_mem_methods *sqlite3MemGetMemsys3(void); +#endif + + +#ifndef SQLITE_MUTEX_OMIT + sqlite3_mutex_methods const *sqlite3DefaultMutex(void); + sqlite3_mutex_methods const *sqlite3NoopMutex(void); + sqlite3_mutex *sqlite3MutexAlloc(int); + int sqlite3MutexInit(void); + int sqlite3MutexEnd(void); +#endif +#if !defined(SQLITE_MUTEX_OMIT) && !defined(SQLITE_MUTEX_NOOP) + void sqlite3MemoryBarrier(void); +#else +# define sqlite3MemoryBarrier() +#endif + +sqlite3_int64 sqlite3StatusValue(int); +void sqlite3StatusUp(int, int); +void sqlite3StatusDown(int, int); +void sqlite3StatusHighwater(int, int); +int sqlite3LookasideUsed(sqlite3*,int*); + +/* Access to mutexes used by sqlite3_status() */ +sqlite3_mutex *sqlite3Pcache1Mutex(void); +sqlite3_mutex *sqlite3MallocMutex(void); + +#if defined(SQLITE_ENABLE_MULTITHREADED_CHECKS) && !defined(SQLITE_MUTEX_OMIT) +void sqlite3MutexWarnOnContention(sqlite3_mutex*); +#else +# define sqlite3MutexWarnOnContention(x) +#endif + +#ifndef SQLITE_OMIT_FLOATING_POINT +# define EXP754 (((u64)0x7ff)<<52) +# define MAN754 ((((u64)1)<<52)-1) +# define IsNaN(X) (((X)&EXP754)==EXP754 && ((X)&MAN754)!=0) + int sqlite3IsNaN(double); +#else +# define IsNaN(X) 0 +# define sqlite3IsNaN(X) 0 +#endif + +/* +** An instance of the following structure holds information about SQL +** functions arguments that are the parameters to the printf() function. +*/ +struct PrintfArguments { + int nArg; /* Total number of arguments */ + int nUsed; /* Number of arguments used so far */ + sqlite3_value **apArg; /* The argument values */ +}; + +char *sqlite3MPrintf(sqlite3*,const char*, ...); +char *sqlite3VMPrintf(sqlite3*,const char*, va_list); +#if defined(SQLITE_DEBUG) || defined(SQLITE_HAVE_OS_TRACE) + void sqlite3DebugPrintf(const char*, ...); +#endif +#if defined(SQLITE_TEST) + void *sqlite3TestTextToPtr(const char*); +#endif + +#if defined(SQLITE_DEBUG) + void sqlite3TreeViewExpr(TreeView*, const Expr*, u8); + void sqlite3TreeViewBareExprList(TreeView*, const ExprList*, const char*); + void sqlite3TreeViewExprList(TreeView*, const ExprList*, u8, const char*); + void sqlite3TreeViewSrcList(TreeView*, const SrcList*); + void sqlite3TreeViewSelect(TreeView*, const Select*, u8); + void sqlite3TreeViewWith(TreeView*, const With*, u8); +#ifndef SQLITE_OMIT_WINDOWFUNC + void sqlite3TreeViewWindow(TreeView*, const Window*, u8); + void sqlite3TreeViewWinFunc(TreeView*, const Window*, u8); +#endif +#endif + + +void sqlite3SetString(char **, sqlite3*, const char*); +void sqlite3ErrorMsg(Parse*, const char*, ...); +int sqlite3ErrorToParser(sqlite3*,int); +void sqlite3Dequote(char*); +void sqlite3DequoteExpr(Expr*); +void sqlite3TokenInit(Token*,char*); +int sqlite3KeywordCode(const unsigned char*, int); +int sqlite3RunParser(Parse*, const char*, char **); +void sqlite3FinishCoding(Parse*); +int sqlite3GetTempReg(Parse*); +void sqlite3ReleaseTempReg(Parse*,int); +int sqlite3GetTempRange(Parse*,int); +void sqlite3ReleaseTempRange(Parse*,int,int); +void sqlite3ClearTempRegCache(Parse*); +#ifdef SQLITE_DEBUG +int sqlite3NoTempsInRange(Parse*,int,int); +#endif +Expr *sqlite3ExprAlloc(sqlite3*,int,const Token*,int); +Expr *sqlite3Expr(sqlite3*,int,const char*); +void sqlite3ExprAttachSubtrees(sqlite3*,Expr*,Expr*,Expr*); +Expr *sqlite3PExpr(Parse*, int, Expr*, Expr*); +void sqlite3PExprAddSelect(Parse*, Expr*, Select*); +Expr *sqlite3ExprAnd(Parse*,Expr*, Expr*); +Expr *sqlite3ExprSimplifiedAndOr(Expr*); +Expr *sqlite3ExprFunction(Parse*,ExprList*, Token*, int); +void sqlite3ExprFunctionUsable(Parse*,Expr*,FuncDef*); +void sqlite3ExprAssignVarNumber(Parse*, Expr*, u32); +void sqlite3ExprDelete(sqlite3*, Expr*); +void sqlite3ExprUnmapAndDelete(Parse*, Expr*); +ExprList *sqlite3ExprListAppend(Parse*,ExprList*,Expr*); +ExprList *sqlite3ExprListAppendVector(Parse*,ExprList*,IdList*,Expr*); +void sqlite3ExprListSetSortOrder(ExprList*,int,int); +void sqlite3ExprListSetName(Parse*,ExprList*,Token*,int); +void sqlite3ExprListSetSpan(Parse*,ExprList*,const char*,const char*); +void sqlite3ExprListDelete(sqlite3*, ExprList*); +u32 sqlite3ExprListFlags(const ExprList*); +int sqlite3IndexHasDuplicateRootPage(Index*); +int sqlite3Init(sqlite3*, char**); +int sqlite3InitCallback(void*, int, char**, char**); +int sqlite3InitOne(sqlite3*, int, char**, u32); +void sqlite3Pragma(Parse*,Token*,Token*,Token*,int); +#ifndef SQLITE_OMIT_VIRTUALTABLE +Module *sqlite3PragmaVtabRegister(sqlite3*,const char *zName); +#endif +void sqlite3ResetAllSchemasOfConnection(sqlite3*); +void sqlite3ResetOneSchema(sqlite3*,int); +void sqlite3CollapseDatabaseArray(sqlite3*); +void sqlite3CommitInternalChanges(sqlite3*); +void sqlite3DeleteColumnNames(sqlite3*,Table*); +int sqlite3ColumnsFromExprList(Parse*,ExprList*,i16*,Column**); +void sqlite3SelectAddColumnTypeAndCollation(Parse*,Table*,Select*,char); +Table *sqlite3ResultSetOfSelect(Parse*,Select*,char); +void sqlite3OpenMasterTable(Parse *, int); +Index *sqlite3PrimaryKeyIndex(Table*); +i16 sqlite3TableColumnToIndex(Index*, i16); +#ifdef SQLITE_OMIT_GENERATED_COLUMNS +# define sqlite3TableColumnToStorage(T,X) (X) /* No-op pass-through */ +# define sqlite3StorageColumnToTable(T,X) (X) /* No-op pass-through */ +#else + i16 sqlite3TableColumnToStorage(Table*, i16); + i16 sqlite3StorageColumnToTable(Table*, i16); +#endif +void sqlite3StartTable(Parse*,Token*,Token*,int,int,int,int); +#if SQLITE_ENABLE_HIDDEN_COLUMNS + void sqlite3ColumnPropertiesFromName(Table*, Column*); +#else +# define sqlite3ColumnPropertiesFromName(T,C) /* no-op */ +#endif +void sqlite3AddColumn(Parse*,Token*,Token*); +void sqlite3AddNotNull(Parse*, int); +void sqlite3AddPrimaryKey(Parse*, ExprList*, int, int, int); +void sqlite3AddCheckConstraint(Parse*, Expr*); +void sqlite3AddDefaultValue(Parse*,Expr*,const char*,const char*); +void sqlite3AddCollateType(Parse*, Token*); +void sqlite3AddGenerated(Parse*,Expr*,Token*); +void sqlite3EndTable(Parse*,Token*,Token*,u8,Select*); +int sqlite3ParseUri(const char*,const char*,unsigned int*, + sqlite3_vfs**,char**,char **); +#define sqlite3CodecQueryParameters(A,B,C) 0 +Btree *sqlite3DbNameToBtree(sqlite3*,const char*); + +#ifdef SQLITE_UNTESTABLE +# define sqlite3FaultSim(X) SQLITE_OK +#else + int sqlite3FaultSim(int); +#endif + +Bitvec *sqlite3BitvecCreate(u32); +int sqlite3BitvecTest(Bitvec*, u32); +int sqlite3BitvecTestNotNull(Bitvec*, u32); +int sqlite3BitvecSet(Bitvec*, u32); +void sqlite3BitvecClear(Bitvec*, u32, void*); +void sqlite3BitvecDestroy(Bitvec*); +u32 sqlite3BitvecSize(Bitvec*); +#ifndef SQLITE_UNTESTABLE +int sqlite3BitvecBuiltinTest(int,int*); +#endif + +RowSet *sqlite3RowSetInit(sqlite3*); +void sqlite3RowSetDelete(void*); +void sqlite3RowSetClear(void*); +void sqlite3RowSetInsert(RowSet*, i64); +int sqlite3RowSetTest(RowSet*, int iBatch, i64); +int sqlite3RowSetNext(RowSet*, i64*); + +void sqlite3CreateView(Parse*,Token*,Token*,Token*,ExprList*,Select*,int,int); + +#if !defined(SQLITE_OMIT_VIEW) || !defined(SQLITE_OMIT_VIRTUALTABLE) + int sqlite3ViewGetColumnNames(Parse*,Table*); +#else +# define sqlite3ViewGetColumnNames(A,B) 0 +#endif + +#if SQLITE_MAX_ATTACHED>30 + int sqlite3DbMaskAllZero(yDbMask); +#endif +void sqlite3DropTable(Parse*, SrcList*, int, int); +void sqlite3CodeDropTable(Parse*, Table*, int, int); +void sqlite3DeleteTable(sqlite3*, Table*); +void sqlite3FreeIndex(sqlite3*, Index*); +#ifndef SQLITE_OMIT_AUTOINCREMENT + void sqlite3AutoincrementBegin(Parse *pParse); + void sqlite3AutoincrementEnd(Parse *pParse); +#else +# define sqlite3AutoincrementBegin(X) +# define sqlite3AutoincrementEnd(X) +#endif +void sqlite3Insert(Parse*, SrcList*, Select*, IdList*, int, Upsert*); +#ifndef SQLITE_OMIT_GENERATED_COLUMNS + void sqlite3ComputeGeneratedColumns(Parse*, int, Table*); +#endif +void *sqlite3ArrayAllocate(sqlite3*,void*,int,int*,int*); +IdList *sqlite3IdListAppend(Parse*, IdList*, Token*); +int sqlite3IdListIndex(IdList*,const char*); +SrcList *sqlite3SrcListEnlarge(Parse*, SrcList*, int, int); +SrcList *sqlite3SrcListAppend(Parse*, SrcList*, Token*, Token*); +SrcList *sqlite3SrcListAppendFromTerm(Parse*, SrcList*, Token*, Token*, + Token*, Select*, Expr*, IdList*); +void sqlite3SrcListIndexedBy(Parse *, SrcList *, Token *); +void sqlite3SrcListFuncArgs(Parse*, SrcList*, ExprList*); +int sqlite3IndexedByLookup(Parse *, struct SrcList_item *); +void sqlite3SrcListShiftJoinType(SrcList*); +void sqlite3SrcListAssignCursors(Parse*, SrcList*); +void sqlite3IdListDelete(sqlite3*, IdList*); +void sqlite3SrcListDelete(sqlite3*, SrcList*); +Index *sqlite3AllocateIndexObject(sqlite3*,i16,int,char**); +void sqlite3CreateIndex(Parse*,Token*,Token*,SrcList*,ExprList*,int,Token*, + Expr*, int, int, u8); +void sqlite3DropIndex(Parse*, SrcList*, int); +int sqlite3Select(Parse*, Select*, SelectDest*); +Select *sqlite3SelectNew(Parse*,ExprList*,SrcList*,Expr*,ExprList*, + Expr*,ExprList*,u32,Expr*); +void sqlite3SelectDelete(sqlite3*, Select*); +void sqlite3SelectReset(Parse*, Select*); +Table *sqlite3SrcListLookup(Parse*, SrcList*); +int sqlite3IsReadOnly(Parse*, Table*, int); +void sqlite3OpenTable(Parse*, int iCur, int iDb, Table*, int); +#if defined(SQLITE_ENABLE_UPDATE_DELETE_LIMIT) && !defined(SQLITE_OMIT_SUBQUERY) +Expr *sqlite3LimitWhere(Parse*,SrcList*,Expr*,ExprList*,Expr*,char*); +#endif +void sqlite3DeleteFrom(Parse*, SrcList*, Expr*, ExprList*, Expr*); +void sqlite3Update(Parse*, SrcList*, ExprList*,Expr*,int,ExprList*,Expr*, + Upsert*); +WhereInfo *sqlite3WhereBegin(Parse*,SrcList*,Expr*,ExprList*,ExprList*,u16,int); +void sqlite3WhereEnd(WhereInfo*); +LogEst sqlite3WhereOutputRowCount(WhereInfo*); +int sqlite3WhereIsDistinct(WhereInfo*); +int sqlite3WhereIsOrdered(WhereInfo*); +int sqlite3WhereOrderByLimitOptLabel(WhereInfo*); +int sqlite3WhereIsSorted(WhereInfo*); +int sqlite3WhereContinueLabel(WhereInfo*); +int sqlite3WhereBreakLabel(WhereInfo*); +int sqlite3WhereOkOnePass(WhereInfo*, int*); +#define ONEPASS_OFF 0 /* Use of ONEPASS not allowed */ +#define ONEPASS_SINGLE 1 /* ONEPASS valid for a single row update */ +#define ONEPASS_MULTI 2 /* ONEPASS is valid for multiple rows */ +int sqlite3WhereUsesDeferredSeek(WhereInfo*); +void sqlite3ExprCodeLoadIndexColumn(Parse*, Index*, int, int, int); +int sqlite3ExprCodeGetColumn(Parse*, Table*, int, int, int, u8); +void sqlite3ExprCodeGetColumnOfTable(Vdbe*, Table*, int, int, int); +void sqlite3ExprCodeMove(Parse*, int, int, int); +void sqlite3ExprCode(Parse*, Expr*, int); +#ifndef SQLITE_OMIT_GENERATED_COLUMNS +void sqlite3ExprCodeGeneratedColumn(Parse*, Column*, int); +#endif +void sqlite3ExprCodeCopy(Parse*, Expr*, int); +void sqlite3ExprCodeFactorable(Parse*, Expr*, int); +int sqlite3ExprCodeRunJustOnce(Parse*, Expr*, int); +int sqlite3ExprCodeTemp(Parse*, Expr*, int*); +int sqlite3ExprCodeTarget(Parse*, Expr*, int); +int sqlite3ExprCodeExprList(Parse*, ExprList*, int, int, u8); +#define SQLITE_ECEL_DUP 0x01 /* Deep, not shallow copies */ +#define SQLITE_ECEL_FACTOR 0x02 /* Factor out constant terms */ +#define SQLITE_ECEL_REF 0x04 /* Use ExprList.u.x.iOrderByCol */ +#define SQLITE_ECEL_OMITREF 0x08 /* Omit if ExprList.u.x.iOrderByCol */ +void sqlite3ExprIfTrue(Parse*, Expr*, int, int); +void sqlite3ExprIfFalse(Parse*, Expr*, int, int); +void sqlite3ExprIfFalseDup(Parse*, Expr*, int, int); +Table *sqlite3FindTable(sqlite3*,const char*, const char*); +#define LOCATE_VIEW 0x01 +#define LOCATE_NOERR 0x02 +Table *sqlite3LocateTable(Parse*,u32 flags,const char*, const char*); +Table *sqlite3LocateTableItem(Parse*,u32 flags,struct SrcList_item *); +Index *sqlite3FindIndex(sqlite3*,const char*, const char*); +void sqlite3UnlinkAndDeleteTable(sqlite3*,int,const char*); +void sqlite3UnlinkAndDeleteIndex(sqlite3*,int,const char*); +void sqlite3Vacuum(Parse*,Token*,Expr*); +int sqlite3RunVacuum(char**, sqlite3*, int, sqlite3_value*); +char *sqlite3NameFromToken(sqlite3*, Token*); +int sqlite3ExprCompare(Parse*,Expr*, Expr*, int); +int sqlite3ExprCompareSkip(Expr*, Expr*, int); +int sqlite3ExprListCompare(ExprList*, ExprList*, int); +int sqlite3ExprImpliesExpr(Parse*,Expr*, Expr*, int); +int sqlite3ExprImpliesNonNullRow(Expr*,int); +void sqlite3ExprAnalyzeAggregates(NameContext*, Expr*); +void sqlite3ExprAnalyzeAggList(NameContext*,ExprList*); +int sqlite3ExprCoveredByIndex(Expr*, int iCur, Index *pIdx); +int sqlite3FunctionUsesThisSrc(Expr*, SrcList*); +Vdbe *sqlite3GetVdbe(Parse*); +#ifndef SQLITE_UNTESTABLE +void sqlite3PrngSaveState(void); +void sqlite3PrngRestoreState(void); +#endif +void sqlite3RollbackAll(sqlite3*,int); +void sqlite3CodeVerifySchema(Parse*, int); +void sqlite3CodeVerifyNamedSchema(Parse*, const char *zDb); +void sqlite3BeginTransaction(Parse*, int); +void sqlite3EndTransaction(Parse*,int); +void sqlite3Savepoint(Parse*, int, Token*); +void sqlite3CloseSavepoints(sqlite3 *); +void sqlite3LeaveMutexAndCloseZombie(sqlite3*); +u32 sqlite3IsTrueOrFalse(const char*); +int sqlite3ExprIdToTrueFalse(Expr*); +int sqlite3ExprTruthValue(const Expr*); +int sqlite3ExprIsConstant(Expr*); +int sqlite3ExprIsConstantNotJoin(Expr*); +int sqlite3ExprIsConstantOrFunction(Expr*, u8); +int sqlite3ExprIsConstantOrGroupBy(Parse*, Expr*, ExprList*); +int sqlite3ExprIsTableConstant(Expr*,int); +#ifdef SQLITE_ENABLE_CURSOR_HINTS +int sqlite3ExprContainsSubquery(Expr*); +#endif +int sqlite3ExprIsInteger(Expr*, int*); +int sqlite3ExprCanBeNull(const Expr*); +int sqlite3ExprNeedsNoAffinityChange(const Expr*, char); +int sqlite3IsRowid(const char*); +void sqlite3GenerateRowDelete( + Parse*,Table*,Trigger*,int,int,int,i16,u8,u8,u8,int); +void sqlite3GenerateRowIndexDelete(Parse*, Table*, int, int, int*, int); +int sqlite3GenerateIndexKey(Parse*, Index*, int, int, int, int*,Index*,int); +void sqlite3ResolvePartIdxLabel(Parse*,int); +int sqlite3ExprReferencesUpdatedColumn(Expr*,int*,int); +void sqlite3GenerateConstraintChecks(Parse*,Table*,int*,int,int,int,int, + u8,u8,int,int*,int*,Upsert*); +#ifdef SQLITE_ENABLE_NULL_TRIM + void sqlite3SetMakeRecordP5(Vdbe*,Table*); +#else +# define sqlite3SetMakeRecordP5(A,B) +#endif +void sqlite3CompleteInsertion(Parse*,Table*,int,int,int,int*,int,int,int); +int sqlite3OpenTableAndIndices(Parse*, Table*, int, u8, int, u8*, int*, int*); +void sqlite3BeginWriteOperation(Parse*, int, int); +void sqlite3MultiWrite(Parse*); +void sqlite3MayAbort(Parse*); +void sqlite3HaltConstraint(Parse*, int, int, char*, i8, u8); +void sqlite3UniqueConstraint(Parse*, int, Index*); +void sqlite3RowidConstraint(Parse*, int, Table*); +Expr *sqlite3ExprDup(sqlite3*,Expr*,int); +ExprList *sqlite3ExprListDup(sqlite3*,ExprList*,int); +SrcList *sqlite3SrcListDup(sqlite3*,SrcList*,int); +IdList *sqlite3IdListDup(sqlite3*,IdList*); +Select *sqlite3SelectDup(sqlite3*,Select*,int); +FuncDef *sqlite3FunctionSearch(int,const char*); +void sqlite3InsertBuiltinFuncs(FuncDef*,int); +FuncDef *sqlite3FindFunction(sqlite3*,const char*,int,u8,u8); +void sqlite3RegisterBuiltinFunctions(void); +void sqlite3RegisterDateTimeFunctions(void); +void sqlite3RegisterPerConnectionBuiltinFunctions(sqlite3*); +int sqlite3SafetyCheckOk(sqlite3*); +int sqlite3SafetyCheckSickOrOk(sqlite3*); +void sqlite3ChangeCookie(Parse*, int); + +#if !defined(SQLITE_OMIT_VIEW) && !defined(SQLITE_OMIT_TRIGGER) +void sqlite3MaterializeView(Parse*, Table*, Expr*, ExprList*,Expr*,int); +#endif + +#ifndef SQLITE_OMIT_TRIGGER + void sqlite3BeginTrigger(Parse*, Token*,Token*,int,int,IdList*,SrcList*, + Expr*,int, int); + void sqlite3FinishTrigger(Parse*, TriggerStep*, Token*); + void sqlite3DropTrigger(Parse*, SrcList*, int); + void sqlite3DropTriggerPtr(Parse*, Trigger*); + Trigger *sqlite3TriggersExist(Parse *, Table*, int, ExprList*, int *pMask); + Trigger *sqlite3TriggerList(Parse *, Table *); + void sqlite3CodeRowTrigger(Parse*, Trigger *, int, ExprList*, int, Table *, + int, int, int); + void sqlite3CodeRowTriggerDirect(Parse *, Trigger *, Table *, int, int, int); + void sqliteViewTriggers(Parse*, Table*, Expr*, int, ExprList*); + void sqlite3DeleteTriggerStep(sqlite3*, TriggerStep*); + TriggerStep *sqlite3TriggerSelectStep(sqlite3*,Select*, + const char*,const char*); + TriggerStep *sqlite3TriggerInsertStep(Parse*,Token*, IdList*, + Select*,u8,Upsert*, + const char*,const char*); + TriggerStep *sqlite3TriggerUpdateStep(Parse*,Token*,ExprList*, Expr*, u8, + const char*,const char*); + TriggerStep *sqlite3TriggerDeleteStep(Parse*,Token*, Expr*, + const char*,const char*); + void sqlite3DeleteTrigger(sqlite3*, Trigger*); + void sqlite3UnlinkAndDeleteTrigger(sqlite3*,int,const char*); + u32 sqlite3TriggerColmask(Parse*,Trigger*,ExprList*,int,int,Table*,int); +# define sqlite3ParseToplevel(p) ((p)->pToplevel ? (p)->pToplevel : (p)) +# define sqlite3IsToplevel(p) ((p)->pToplevel==0) +#else +# define sqlite3TriggersExist(B,C,D,E,F) 0 +# define sqlite3DeleteTrigger(A,B) +# define sqlite3DropTriggerPtr(A,B) +# define sqlite3UnlinkAndDeleteTrigger(A,B,C) +# define sqlite3CodeRowTrigger(A,B,C,D,E,F,G,H,I) +# define sqlite3CodeRowTriggerDirect(A,B,C,D,E,F) +# define sqlite3TriggerList(X, Y) 0 +# define sqlite3ParseToplevel(p) p +# define sqlite3IsToplevel(p) 1 +# define sqlite3TriggerColmask(A,B,C,D,E,F,G) 0 +#endif + +int sqlite3JoinType(Parse*, Token*, Token*, Token*); +void sqlite3SetJoinExpr(Expr*,int); +void sqlite3CreateForeignKey(Parse*, ExprList*, Token*, ExprList*, int); +void sqlite3DeferForeignKey(Parse*, int); +#ifndef SQLITE_OMIT_AUTHORIZATION + void sqlite3AuthRead(Parse*,Expr*,Schema*,SrcList*); + int sqlite3AuthCheck(Parse*,int, const char*, const char*, const char*); + void sqlite3AuthContextPush(Parse*, AuthContext*, const char*); + void sqlite3AuthContextPop(AuthContext*); + int sqlite3AuthReadCol(Parse*, const char *, const char *, int); +#else +# define sqlite3AuthRead(a,b,c,d) +# define sqlite3AuthCheck(a,b,c,d,e) SQLITE_OK +# define sqlite3AuthContextPush(a,b,c) +# define sqlite3AuthContextPop(a) ((void)(a)) +#endif +int sqlite3DbIsNamed(sqlite3 *db, int iDb, const char *zName); +void sqlite3Attach(Parse*, Expr*, Expr*, Expr*); +void sqlite3Detach(Parse*, Expr*); +void sqlite3FixInit(DbFixer*, Parse*, int, const char*, const Token*); +int sqlite3FixSrcList(DbFixer*, SrcList*); +int sqlite3FixSelect(DbFixer*, Select*); +int sqlite3FixExpr(DbFixer*, Expr*); +int sqlite3FixExprList(DbFixer*, ExprList*); +int sqlite3FixTriggerStep(DbFixer*, TriggerStep*); +int sqlite3RealSameAsInt(double,sqlite3_int64); +int sqlite3AtoF(const char *z, double*, int, u8); +int sqlite3GetInt32(const char *, int*); +int sqlite3Atoi(const char*); +#ifndef SQLITE_OMIT_UTF16 +int sqlite3Utf16ByteLen(const void *pData, int nChar); +#endif +int sqlite3Utf8CharLen(const char *pData, int nByte); +u32 sqlite3Utf8Read(const u8**); +LogEst sqlite3LogEst(u64); +LogEst sqlite3LogEstAdd(LogEst,LogEst); +#ifndef SQLITE_OMIT_VIRTUALTABLE +LogEst sqlite3LogEstFromDouble(double); +#endif +#if defined(SQLITE_ENABLE_STMT_SCANSTATUS) || \ + defined(SQLITE_ENABLE_STAT4) || \ + defined(SQLITE_EXPLAIN_ESTIMATED_ROWS) +u64 sqlite3LogEstToInt(LogEst); +#endif +VList *sqlite3VListAdd(sqlite3*,VList*,const char*,int,int); +const char *sqlite3VListNumToName(VList*,int); +int sqlite3VListNameToNum(VList*,const char*,int); + +/* +** Routines to read and write variable-length integers. These used to +** be defined locally, but now we use the varint routines in the util.c +** file. +*/ +int sqlite3PutVarint(unsigned char*, u64); +u8 sqlite3GetVarint(const unsigned char *, u64 *); +u8 sqlite3GetVarint32(const unsigned char *, u32 *); +int sqlite3VarintLen(u64 v); + +/* +** The common case is for a varint to be a single byte. They following +** macros handle the common case without a procedure call, but then call +** the procedure for larger varints. +*/ +#define getVarint32(A,B) \ + (u8)((*(A)<(u8)0x80)?((B)=(u32)*(A)),1:sqlite3GetVarint32((A),(u32 *)&(B))) +#define getVarint32NR(A,B) \ + B=(u32)*(A);if(B>=0x80)sqlite3GetVarint32((A),(u32*)&(B)) +#define putVarint32(A,B) \ + (u8)(((u32)(B)<(u32)0x80)?(*(A)=(unsigned char)(B)),1:\ + sqlite3PutVarint((A),(B))) +#define getVarint sqlite3GetVarint +#define putVarint sqlite3PutVarint + + +const char *sqlite3IndexAffinityStr(sqlite3*, Index*); +void sqlite3TableAffinity(Vdbe*, Table*, int); +char sqlite3CompareAffinity(const Expr *pExpr, char aff2); +int sqlite3IndexAffinityOk(const Expr *pExpr, char idx_affinity); +char sqlite3TableColumnAffinity(Table*,int); +char sqlite3ExprAffinity(const Expr *pExpr); +int sqlite3Atoi64(const char*, i64*, int, u8); +int sqlite3DecOrHexToI64(const char*, i64*); +void sqlite3ErrorWithMsg(sqlite3*, int, const char*,...); +void sqlite3Error(sqlite3*,int); +void sqlite3SystemError(sqlite3*,int); +void *sqlite3HexToBlob(sqlite3*, const char *z, int n); +u8 sqlite3HexToInt(int h); +int sqlite3TwoPartName(Parse *, Token *, Token *, Token **); + +#if defined(SQLITE_NEED_ERR_NAME) +const char *sqlite3ErrName(int); +#endif + +#ifdef SQLITE_ENABLE_DESERIALIZE +int sqlite3MemdbInit(void); +#endif + +const char *sqlite3ErrStr(int); +int sqlite3ReadSchema(Parse *pParse); +CollSeq *sqlite3FindCollSeq(sqlite3*,u8 enc, const char*,int); +int sqlite3IsBinary(const CollSeq*); +CollSeq *sqlite3LocateCollSeq(Parse *pParse, const char*zName); +void sqlite3SetTextEncoding(sqlite3 *db, u8); +CollSeq *sqlite3ExprCollSeq(Parse *pParse, const Expr *pExpr); +CollSeq *sqlite3ExprNNCollSeq(Parse *pParse, const Expr *pExpr); +int sqlite3ExprCollSeqMatch(Parse*,const Expr*,const Expr*); +Expr *sqlite3ExprAddCollateToken(Parse *pParse, Expr*, const Token*, int); +Expr *sqlite3ExprAddCollateString(Parse*,Expr*,const char*); +Expr *sqlite3ExprSkipCollate(Expr*); +Expr *sqlite3ExprSkipCollateAndLikely(Expr*); +int sqlite3CheckCollSeq(Parse *, CollSeq *); +int sqlite3WritableSchema(sqlite3*); +int sqlite3CheckObjectName(Parse*, const char*,const char*,const char*); +void sqlite3VdbeSetChanges(sqlite3 *, int); +int sqlite3AddInt64(i64*,i64); +int sqlite3SubInt64(i64*,i64); +int sqlite3MulInt64(i64*,i64); +int sqlite3AbsInt32(int); +#ifdef SQLITE_ENABLE_8_3_NAMES +void sqlite3FileSuffix3(const char*, char*); +#else +# define sqlite3FileSuffix3(X,Y) +#endif +u8 sqlite3GetBoolean(const char *z,u8); + +const void *sqlite3ValueText(sqlite3_value*, u8); +int sqlite3ValueBytes(sqlite3_value*, u8); +void sqlite3ValueSetStr(sqlite3_value*, int, const void *,u8, + void(*)(void*)); +void sqlite3ValueSetNull(sqlite3_value*); +void sqlite3ValueFree(sqlite3_value*); +#ifndef SQLITE_UNTESTABLE +void sqlite3ResultIntReal(sqlite3_context*); +#endif +sqlite3_value *sqlite3ValueNew(sqlite3 *); +#ifndef SQLITE_OMIT_UTF16 +char *sqlite3Utf16to8(sqlite3 *, const void*, int, u8); +#endif +int sqlite3ValueFromExpr(sqlite3 *, Expr *, u8, u8, sqlite3_value **); +void sqlite3ValueApplyAffinity(sqlite3_value *, u8, u8); +#ifndef SQLITE_AMALGAMATION +extern const unsigned char sqlite3OpcodeProperty[]; +extern const char sqlite3StrBINARY[]; +extern const unsigned char sqlite3UpperToLower[]; +extern const unsigned char sqlite3CtypeMap[]; +extern SQLITE_WSD struct Sqlite3Config sqlite3Config; +extern FuncDefHash sqlite3BuiltinFunctions; +extern u32 sqlite3SelectTrace; +#ifndef SQLITE_OMIT_WSD +extern int sqlite3PendingByte; +#endif +#endif /* !defined(SQLITE_AMALGAMATION) */ +#ifdef VDBE_PROFILE +extern sqlite3_uint64 sqlite3NProfileCnt; +#endif +void sqlite3RootPageMoved(sqlite3*, int, int, int); +void sqlite3Reindex(Parse*, Token*, Token*); +void sqlite3AlterFunctions(void); +void sqlite3AlterRenameTable(Parse*, SrcList*, Token*); +void sqlite3AlterRenameColumn(Parse*, SrcList*, Token*, Token*); +int sqlite3GetToken(const unsigned char *, int *); +void sqlite3NestedParse(Parse*, const char*, ...); +void sqlite3ExpirePreparedStatements(sqlite3*, int); +void sqlite3CodeRhsOfIN(Parse*, Expr*, int); +int sqlite3CodeSubselect(Parse*, Expr*); +void sqlite3SelectPrep(Parse*, Select*, NameContext*); +void sqlite3SelectWrongNumTermsError(Parse *pParse, Select *p); +int sqlite3MatchEName( + const struct ExprList_item*, + const char*, + const char*, + const char* +); +Bitmask sqlite3ExprColUsed(Expr*); +u8 sqlite3StrIHash(const char*); +int sqlite3ResolveExprNames(NameContext*, Expr*); +int sqlite3ResolveExprListNames(NameContext*, ExprList*); +void sqlite3ResolveSelectNames(Parse*, Select*, NameContext*); +int sqlite3ResolveSelfReference(Parse*,Table*,int,Expr*,ExprList*); +int sqlite3ResolveOrderGroupBy(Parse*, Select*, ExprList*, const char*); +void sqlite3ColumnDefault(Vdbe *, Table *, int, int); +void sqlite3AlterFinishAddColumn(Parse *, Token *); +void sqlite3AlterBeginAddColumn(Parse *, SrcList *); +void *sqlite3RenameTokenMap(Parse*, void*, Token*); +void sqlite3RenameTokenRemap(Parse*, void *pTo, void *pFrom); +void sqlite3RenameExprUnmap(Parse*, Expr*); +void sqlite3RenameExprlistUnmap(Parse*, ExprList*); +CollSeq *sqlite3GetCollSeq(Parse*, u8, CollSeq *, const char*); +char sqlite3AffinityType(const char*, Column*); +void sqlite3Analyze(Parse*, Token*, Token*); +int sqlite3InvokeBusyHandler(BusyHandler*); +int sqlite3FindDb(sqlite3*, Token*); +int sqlite3FindDbName(sqlite3 *, const char *); +int sqlite3AnalysisLoad(sqlite3*,int iDB); +void sqlite3DeleteIndexSamples(sqlite3*,Index*); +void sqlite3DefaultRowEst(Index*); +void sqlite3RegisterLikeFunctions(sqlite3*, int); +int sqlite3IsLikeFunction(sqlite3*,Expr*,int*,char*); +void sqlite3SchemaClear(void *); +Schema *sqlite3SchemaGet(sqlite3 *, Btree *); +int sqlite3SchemaToIndex(sqlite3 *db, Schema *); +KeyInfo *sqlite3KeyInfoAlloc(sqlite3*,int,int); +void sqlite3KeyInfoUnref(KeyInfo*); +KeyInfo *sqlite3KeyInfoRef(KeyInfo*); +KeyInfo *sqlite3KeyInfoOfIndex(Parse*, Index*); +KeyInfo *sqlite3KeyInfoFromExprList(Parse*, ExprList*, int, int); +int sqlite3HasExplicitNulls(Parse*, ExprList*); + +#ifdef SQLITE_DEBUG +int sqlite3KeyInfoIsWriteable(KeyInfo*); +#endif +int sqlite3CreateFunc(sqlite3 *, const char *, int, int, void *, + void (*)(sqlite3_context*,int,sqlite3_value **), + void (*)(sqlite3_context*,int,sqlite3_value **), + void (*)(sqlite3_context*), + void (*)(sqlite3_context*), + void (*)(sqlite3_context*,int,sqlite3_value **), + FuncDestructor *pDestructor +); +void sqlite3NoopDestructor(void*); +void sqlite3OomFault(sqlite3*); +void sqlite3OomClear(sqlite3*); +int sqlite3ApiExit(sqlite3 *db, int); +int sqlite3OpenTempDatabase(Parse *); + +void sqlite3StrAccumInit(StrAccum*, sqlite3*, char*, int, int); +char *sqlite3StrAccumFinish(StrAccum*); +void sqlite3SelectDestInit(SelectDest*,int,int); +Expr *sqlite3CreateColumnExpr(sqlite3 *, SrcList *, int, int); + +void sqlite3BackupRestart(sqlite3_backup *); +void sqlite3BackupUpdate(sqlite3_backup *, Pgno, const u8 *); + +#ifndef SQLITE_OMIT_SUBQUERY +int sqlite3ExprCheckIN(Parse*, Expr*); +#else +# define sqlite3ExprCheckIN(x,y) SQLITE_OK +#endif + +#ifdef SQLITE_ENABLE_STAT4 +int sqlite3Stat4ProbeSetValue( + Parse*,Index*,UnpackedRecord**,Expr*,int,int,int*); +int sqlite3Stat4ValueFromExpr(Parse*, Expr*, u8, sqlite3_value**); +void sqlite3Stat4ProbeFree(UnpackedRecord*); +int sqlite3Stat4Column(sqlite3*, const void*, int, int, sqlite3_value**); +char sqlite3IndexColumnAffinity(sqlite3*, Index*, int); +#endif + +/* +** The interface to the LEMON-generated parser +*/ +#ifndef SQLITE_AMALGAMATION + void *sqlite3ParserAlloc(void*(*)(u64), Parse*); + void sqlite3ParserFree(void*, void(*)(void*)); +#endif +void sqlite3Parser(void*, int, Token); +int sqlite3ParserFallback(int); +#ifdef YYTRACKMAXSTACKDEPTH + int sqlite3ParserStackPeak(void*); +#endif + +void sqlite3AutoLoadExtensions(sqlite3*); +#ifndef SQLITE_OMIT_LOAD_EXTENSION + void sqlite3CloseExtensions(sqlite3*); +#else +# define sqlite3CloseExtensions(X) +#endif + +#ifndef SQLITE_OMIT_SHARED_CACHE + void sqlite3TableLock(Parse *, int, int, u8, const char *); +#else + #define sqlite3TableLock(v,w,x,y,z) +#endif + +#ifdef SQLITE_TEST + int sqlite3Utf8To8(unsigned char*); +#endif + +#ifdef SQLITE_OMIT_VIRTUALTABLE +# define sqlite3VtabClear(Y) +# define sqlite3VtabSync(X,Y) SQLITE_OK +# define sqlite3VtabRollback(X) +# define sqlite3VtabCommit(X) +# define sqlite3VtabInSync(db) 0 +# define sqlite3VtabLock(X) +# define sqlite3VtabUnlock(X) +# define sqlite3VtabModuleUnref(D,X) +# define sqlite3VtabUnlockList(X) +# define sqlite3VtabSavepoint(X, Y, Z) SQLITE_OK +# define sqlite3GetVTable(X,Y) ((VTable*)0) +#else + void sqlite3VtabClear(sqlite3 *db, Table*); + void sqlite3VtabDisconnect(sqlite3 *db, Table *p); + int sqlite3VtabSync(sqlite3 *db, Vdbe*); + int sqlite3VtabRollback(sqlite3 *db); + int sqlite3VtabCommit(sqlite3 *db); + void sqlite3VtabLock(VTable *); + void sqlite3VtabUnlock(VTable *); + void sqlite3VtabModuleUnref(sqlite3*,Module*); + void sqlite3VtabUnlockList(sqlite3*); + int sqlite3VtabSavepoint(sqlite3 *, int, int); + void sqlite3VtabImportErrmsg(Vdbe*, sqlite3_vtab*); + VTable *sqlite3GetVTable(sqlite3*, Table*); + Module *sqlite3VtabCreateModule( + sqlite3*, + const char*, + const sqlite3_module*, + void*, + void(*)(void*) + ); +# define sqlite3VtabInSync(db) ((db)->nVTrans>0 && (db)->aVTrans==0) +#endif +int sqlite3ReadOnlyShadowTables(sqlite3 *db); +#ifndef SQLITE_OMIT_VIRTUALTABLE + int sqlite3ShadowTableName(sqlite3 *db, const char *zName); + int sqlite3IsShadowTableOf(sqlite3*,Table*,const char*); +#else +# define sqlite3ShadowTableName(A,B) 0 +# define sqlite3IsShadowTableOf(A,B,C) 0 +#endif +int sqlite3VtabEponymousTableInit(Parse*,Module*); +void sqlite3VtabEponymousTableClear(sqlite3*,Module*); +void sqlite3VtabMakeWritable(Parse*,Table*); +void sqlite3VtabBeginParse(Parse*, Token*, Token*, Token*, int); +void sqlite3VtabFinishParse(Parse*, Token*); +void sqlite3VtabArgInit(Parse*); +void sqlite3VtabArgExtend(Parse*, Token*); +int sqlite3VtabCallCreate(sqlite3*, int, const char *, char **); +int sqlite3VtabCallConnect(Parse*, Table*); +int sqlite3VtabCallDestroy(sqlite3*, int, const char *); +int sqlite3VtabBegin(sqlite3 *, VTable *); +FuncDef *sqlite3VtabOverloadFunction(sqlite3 *,FuncDef*, int nArg, Expr*); +sqlite3_int64 sqlite3StmtCurrentTime(sqlite3_context*); +int sqlite3VdbeParameterIndex(Vdbe*, const char*, int); +int sqlite3TransferBindings(sqlite3_stmt *, sqlite3_stmt *); +void sqlite3ParserReset(Parse*); +#ifdef SQLITE_ENABLE_NORMALIZE +char *sqlite3Normalize(Vdbe*, const char*); +#endif +int sqlite3Reprepare(Vdbe*); +void sqlite3ExprListCheckLength(Parse*, ExprList*, const char*); +CollSeq *sqlite3ExprCompareCollSeq(Parse*,const Expr*); +CollSeq *sqlite3BinaryCompareCollSeq(Parse *, const Expr*, const Expr*); +int sqlite3TempInMemory(const sqlite3*); +const char *sqlite3JournalModename(int); +#ifndef SQLITE_OMIT_WAL + int sqlite3Checkpoint(sqlite3*, int, int, int*, int*); + int sqlite3WalDefaultHook(void*,sqlite3*,const char*,int); +#endif +#ifndef SQLITE_OMIT_CTE + With *sqlite3WithAdd(Parse*,With*,Token*,ExprList*,Select*); + void sqlite3WithDelete(sqlite3*,With*); + void sqlite3WithPush(Parse*, With*, u8); +#else +#define sqlite3WithPush(x,y,z) +#define sqlite3WithDelete(x,y) +#endif +#ifndef SQLITE_OMIT_UPSERT + Upsert *sqlite3UpsertNew(sqlite3*,ExprList*,Expr*,ExprList*,Expr*); + void sqlite3UpsertDelete(sqlite3*,Upsert*); + Upsert *sqlite3UpsertDup(sqlite3*,Upsert*); + int sqlite3UpsertAnalyzeTarget(Parse*,SrcList*,Upsert*); + void sqlite3UpsertDoUpdate(Parse*,Upsert*,Table*,Index*,int); +#else +#define sqlite3UpsertNew(v,w,x,y,z) ((Upsert*)0) +#define sqlite3UpsertDelete(x,y) +#define sqlite3UpsertDup(x,y) ((Upsert*)0) +#endif + + +/* Declarations for functions in fkey.c. All of these are replaced by +** no-op macros if OMIT_FOREIGN_KEY is defined. In this case no foreign +** key functionality is available. If OMIT_TRIGGER is defined but +** OMIT_FOREIGN_KEY is not, only some of the functions are no-oped. In +** this case foreign keys are parsed, but no other functionality is +** provided (enforcement of FK constraints requires the triggers sub-system). +*/ +#if !defined(SQLITE_OMIT_FOREIGN_KEY) && !defined(SQLITE_OMIT_TRIGGER) + void sqlite3FkCheck(Parse*, Table*, int, int, int*, int); + void sqlite3FkDropTable(Parse*, SrcList *, Table*); + void sqlite3FkActions(Parse*, Table*, ExprList*, int, int*, int); + int sqlite3FkRequired(Parse*, Table*, int*, int); + u32 sqlite3FkOldmask(Parse*, Table*); + FKey *sqlite3FkReferences(Table *); +#else + #define sqlite3FkActions(a,b,c,d,e,f) + #define sqlite3FkCheck(a,b,c,d,e,f) + #define sqlite3FkDropTable(a,b,c) + #define sqlite3FkOldmask(a,b) 0 + #define sqlite3FkRequired(a,b,c,d) 0 + #define sqlite3FkReferences(a) 0 +#endif +#ifndef SQLITE_OMIT_FOREIGN_KEY + void sqlite3FkDelete(sqlite3 *, Table*); + int sqlite3FkLocateIndex(Parse*,Table*,FKey*,Index**,int**); +#else + #define sqlite3FkDelete(a,b) + #define sqlite3FkLocateIndex(a,b,c,d,e) +#endif + + +/* +** Available fault injectors. Should be numbered beginning with 0. +*/ +#define SQLITE_FAULTINJECTOR_MALLOC 0 +#define SQLITE_FAULTINJECTOR_COUNT 1 + +/* +** The interface to the code in fault.c used for identifying "benign" +** malloc failures. This is only present if SQLITE_UNTESTABLE +** is not defined. +*/ +#ifndef SQLITE_UNTESTABLE + void sqlite3BeginBenignMalloc(void); + void sqlite3EndBenignMalloc(void); +#else + #define sqlite3BeginBenignMalloc() + #define sqlite3EndBenignMalloc() +#endif + +/* +** Allowed return values from sqlite3FindInIndex() +*/ +#define IN_INDEX_ROWID 1 /* Search the rowid of the table */ +#define IN_INDEX_EPH 2 /* Search an ephemeral b-tree */ +#define IN_INDEX_INDEX_ASC 3 /* Existing index ASCENDING */ +#define IN_INDEX_INDEX_DESC 4 /* Existing index DESCENDING */ +#define IN_INDEX_NOOP 5 /* No table available. Use comparisons */ +/* +** Allowed flags for the 3rd parameter to sqlite3FindInIndex(). +*/ +#define IN_INDEX_NOOP_OK 0x0001 /* OK to return IN_INDEX_NOOP */ +#define IN_INDEX_MEMBERSHIP 0x0002 /* IN operator used for membership test */ +#define IN_INDEX_LOOP 0x0004 /* IN operator used as a loop */ +int sqlite3FindInIndex(Parse *, Expr *, u32, int*, int*, int*); + +int sqlite3JournalOpen(sqlite3_vfs *, const char *, sqlite3_file *, int, int); +int sqlite3JournalSize(sqlite3_vfs *); +#if defined(SQLITE_ENABLE_ATOMIC_WRITE) \ + || defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE) + int sqlite3JournalCreate(sqlite3_file *); +#endif + +int sqlite3JournalIsInMemory(sqlite3_file *p); +void sqlite3MemJournalOpen(sqlite3_file *); + +void sqlite3ExprSetHeightAndFlags(Parse *pParse, Expr *p); +#if SQLITE_MAX_EXPR_DEPTH>0 + int sqlite3SelectExprHeight(Select *); + int sqlite3ExprCheckHeight(Parse*, int); +#else + #define sqlite3SelectExprHeight(x) 0 + #define sqlite3ExprCheckHeight(x,y) +#endif + +u32 sqlite3Get4byte(const u8*); +void sqlite3Put4byte(u8*, u32); + +#ifdef SQLITE_ENABLE_UNLOCK_NOTIFY + void sqlite3ConnectionBlocked(sqlite3 *, sqlite3 *); + void sqlite3ConnectionUnlocked(sqlite3 *db); + void sqlite3ConnectionClosed(sqlite3 *db); +#else + #define sqlite3ConnectionBlocked(x,y) + #define sqlite3ConnectionUnlocked(x) + #define sqlite3ConnectionClosed(x) +#endif + +#ifdef SQLITE_DEBUG + void sqlite3ParserTrace(FILE*, char *); +#endif +#if defined(YYCOVERAGE) + int sqlite3ParserCoverage(FILE*); +#endif + +/* +** If the SQLITE_ENABLE IOTRACE exists then the global variable +** sqlite3IoTrace is a pointer to a printf-like routine used to +** print I/O tracing messages. +*/ +#ifdef SQLITE_ENABLE_IOTRACE +# define IOTRACE(A) if( sqlite3IoTrace ){ sqlite3IoTrace A; } + void sqlite3VdbeIOTraceSql(Vdbe*); +SQLITE_API SQLITE_EXTERN void (SQLITE_CDECL *sqlite3IoTrace)(const char*,...); +#else +# define IOTRACE(A) +# define sqlite3VdbeIOTraceSql(X) +#endif + +/* +** These routines are available for the mem2.c debugging memory allocator +** only. They are used to verify that different "types" of memory +** allocations are properly tracked by the system. +** +** sqlite3MemdebugSetType() sets the "type" of an allocation to one of +** the MEMTYPE_* macros defined below. The type must be a bitmask with +** a single bit set. +** +** sqlite3MemdebugHasType() returns true if any of the bits in its second +** argument match the type set by the previous sqlite3MemdebugSetType(). +** sqlite3MemdebugHasType() is intended for use inside assert() statements. +** +** sqlite3MemdebugNoType() returns true if none of the bits in its second +** argument match the type set by the previous sqlite3MemdebugSetType(). +** +** Perhaps the most important point is the difference between MEMTYPE_HEAP +** and MEMTYPE_LOOKASIDE. If an allocation is MEMTYPE_LOOKASIDE, that means +** it might have been allocated by lookaside, except the allocation was +** too large or lookaside was already full. It is important to verify +** that allocations that might have been satisfied by lookaside are not +** passed back to non-lookaside free() routines. Asserts such as the +** example above are placed on the non-lookaside free() routines to verify +** this constraint. +** +** All of this is no-op for a production build. It only comes into +** play when the SQLITE_MEMDEBUG compile-time option is used. +*/ +#ifdef SQLITE_MEMDEBUG + void sqlite3MemdebugSetType(void*,u8); + int sqlite3MemdebugHasType(void*,u8); + int sqlite3MemdebugNoType(void*,u8); +#else +# define sqlite3MemdebugSetType(X,Y) /* no-op */ +# define sqlite3MemdebugHasType(X,Y) 1 +# define sqlite3MemdebugNoType(X,Y) 1 +#endif +#define MEMTYPE_HEAP 0x01 /* General heap allocations */ +#define MEMTYPE_LOOKASIDE 0x02 /* Heap that might have been lookaside */ +#define MEMTYPE_PCACHE 0x04 /* Page cache allocations */ + +/* +** Threading interface +*/ +#if SQLITE_MAX_WORKER_THREADS>0 +int sqlite3ThreadCreate(SQLiteThread**,void*(*)(void*),void*); +int sqlite3ThreadJoin(SQLiteThread*, void**); +#endif + +#if defined(SQLITE_ENABLE_DBPAGE_VTAB) || defined(SQLITE_TEST) +int sqlite3DbpageRegister(sqlite3*); +#endif +#if defined(SQLITE_ENABLE_DBSTAT_VTAB) || defined(SQLITE_TEST) +int sqlite3DbstatRegister(sqlite3*); +#endif + +int sqlite3ExprVectorSize(Expr *pExpr); +int sqlite3ExprIsVector(Expr *pExpr); +Expr *sqlite3VectorFieldSubexpr(Expr*, int); +Expr *sqlite3ExprForVectorField(Parse*,Expr*,int); +void sqlite3VectorErrorMsg(Parse*, Expr*); + +#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS +const char **sqlite3CompileOptions(int *pnOpt); +#endif + +#endif /* SQLITEINT_H */ diff -Npur sqlite-version-3.32.2/src/test1.c sqlite-version-3.32.2-patched/src/test1.c --- sqlite-version-3.32.2/src/test1.c 2020-06-04 20:58:43.000000000 +0800 +++ sqlite-version-3.32.2-patched/src/test1.c 2020-07-08 10:00:47.371088720 +0800 @@ -8164,7 +8164,7 @@ int Sqlitetest1_Init(Tcl_Interp *interp) #endif #endif #if defined(SQLITE_ENABLE_SELECTTRACE) - extern int sqlite3SelectTrace; + extern u32 sqlite3SelectTrace; #endif for(i=0; ipWin && p->pPrior==0 && (p->selFlags & SF_WinRewrite)==0 ){ + if( ALWAYS(p->pWin && (p->selFlags & SF_WinRewrite)==0) ){ Vdbe *v = sqlite3GetVdbe(pParse); sqlite3 *db = pParse->db; Select *pSub = 0; /* The subquery */ diff -Npur sqlite-version-3.32.2/test/selectA.test sqlite-version-3.32.2-patched/test/selectA.test --- sqlite-version-3.32.2/test/selectA.test 2020-06-04 20:58:43.000000000 +0800 +++ sqlite-version-3.32.2-patched/test/selectA.test 2020-07-08 10:00:50.899152517 +0800 @@ -1446,5 +1446,26 @@ do_execsql_test 6.1 { SELECT * FROM (SELECT a FROM t1 UNION SELECT b FROM t2) WHERE a=a; } {12345} +# 2020-06-15 ticket 8f157e8010b22af0 +# +reset_db +do_execsql_test 7.1 { + CREATE TABLE t1(c1); INSERT INTO t1 VALUES(12),(123),(1234),(NULL),('abc'); + CREATE TABLE t2(c2); INSERT INTO t2 VALUES(44),(55),(123); + CREATE TABLE t3(c3,c4); INSERT INTO t3 VALUES(66,1),(123,2),(77,3); + CREATE VIEW t4 AS SELECT c3 FROM t3; + CREATE VIEW t5 AS SELECT c3 FROM t3 ORDER BY c4; +} +do_execsql_test 7.2 { + SELECT * FROM t1, t2 WHERE c1=(SELECT 123 INTERSECT SELECT c2 FROM t4) AND c1=123; +} {123 123} +do_execsql_test 7.3 { + SELECT * FROM t1, t2 WHERE c1=(SELECT 123 INTERSECT SELECT c2 FROM t5) AND c1=123; +} {123 123} +do_execsql_test 7.4 { + CREATE TABLE a(b); + CREATE VIEW c(d) AS SELECT b FROM a ORDER BY b; + SELECT sum(d) OVER( PARTITION BY(SELECT 0 FROM c JOIN a WHERE b =(SELECT b INTERSECT SELECT d FROM c) AND b = 123)) FROM c; +} {} finish_test diff -Npur sqlite-version-3.32.2/test/window1.test sqlite-version-3.32.2-patched/test/window1.test --- sqlite-version-3.32.2/test/window1.test 2020-06-04 20:58:43.000000000 +0800 +++ sqlite-version-3.32.2-patched/test/window1.test 2020-07-08 10:00:47.371088720 +0800 @@ -1743,5 +1743,47 @@ do_execsql_test 53.0 { WHERE a.c); } {4 4 4 4} +#------------------------------------------------------------------------- +reset_db +do_execsql_test 54.1 { + CREATE TABLE t1(a VARCHAR(20), b FLOAT); + INSERT INTO t1 VALUES('1',10.0); +} + +do_execsql_test 54.2 { + SELECT * FROM ( + SELECT sum(b) OVER() AS c FROM t1 + UNION + SELECT b AS c FROM t1 + ) WHERE c>10; +} + +do_execsql_test 54.3 { + INSERT INTO t1 VALUES('2',5.0); + INSERT INTO t1 VALUES('3',15.0); +} + +do_execsql_test 54.4 { + SELECT * FROM ( + SELECT sum(b) OVER() AS c FROM t1 + UNION + SELECT b AS c FROM t1 + ) WHERE c>10; +} {15.0 30.0} + +# 2020-06-05 ticket c8d3b9f0a750a529 +reset_db +do_execsql_test 55.1 { + CREATE TABLE a(b); + SELECT + (SELECT b FROM a + GROUP BY b + HAVING (SELECT COUNT()OVER() + lead(b)OVER(ORDER BY SUM(DISTINCT b) + b)) + ) + FROM a + UNION + SELECT 99 + ORDER BY 1; +} {99} finish_test