these files are not needed for a working CVS repository

git-svn-id: https://svn.apache.org/repos/asf/ant/core/trunk@1004210 13f79535-47bb-0310-9956-ffa450edef68
14 years ago · 43c676f951
--- a/src/tests/antunit/taskdefs/cvs/repository/CVSROOT/.#checkoutlist
+++ b/src/tests/antunit/taskdefs/cvs/repository/CVSROOT/.#checkoutlist
@@ -1,13 +0,0 @@
 # The "checkoutlist" file is used to support additional version controlled
 # administrative files in $CVSROOT/CVSROOT, such as template files.
 #
 # The first entry on a line is a filename which will be checked out from
 # the corresponding RCS file in the $CVSROOT/CVSROOT directory.
 # The remainder of the line is an error message to use if the file cannot
 # be checked out.
 #
 # File format:
 #
 #	[<whitespace>]<filename>[<whitespace><error message>]<end-of-line>
 #
 # comment lines begin with '#'
--- a/src/tests/antunit/taskdefs/cvs/repository/CVSROOT/.#commitinfo
+++ b/src/tests/antunit/taskdefs/cvs/repository/CVSROOT/.#commitinfo
@@ -1,26 +0,0 @@
 # The "commitinfo" file is used to control pre-commit checks.
 # The filter on the right is invoked with the repository and a list 
 # of files to check.  A non-zero exit of the filter program will 
 # cause the commit to be aborted.
 #
 # The first entry on a line is a regular expression which is tested
 # against the directory that the change is being committed to, relative
 # to the $CVSROOT.  For the first match that is found, then the remainder
 # of the line is the name of the filter to run.
 #
 # Format strings present in the filter will be replaced as follows:
 #    %c = canonical name of the command being executed
 #    %R = the name of the referrer, if any, otherwise the value NONE
 #    %p = path relative to repository
 #    %r = repository (path portion of $CVSROOT)
 #    %{s} = file name, file name, ...
 #
 # If no format strings are present in the filter string, a default of
 # " %r %s" will be appended to the filter string, but this usage is
 # deprecated.
 #
 # If the repository name does not match any of the regular expressions in this
 # file, the "DEFAULT" line is used, if it is specified.
 #
 # If the name "ALL" appears as a regular expression it is always used
 # in addition to the first matching regex or "DEFAULT".
--- a/src/tests/antunit/taskdefs/cvs/repository/CVSROOT/.#config
+++ b/src/tests/antunit/taskdefs/cvs/repository/CVSROOT/.#config
@@ -1,97 +0,0 @@
 # Set `SystemAuth' to `no' if pserver shouldn't check system users/passwords.
 #SystemAuth=no

 # Set `LocalKeyword' to specify a local alias for a standard keyword.
 #LocalKeyword=MYCVS=CVSHeader

 # Set `KeywordExpand' to `i' followed by a list of keywords to expand or
 # `e' followed by a list of keywords to not expand.
 #KeywordExpand=iMYCVS,Name,Date
 #KeywordExpand=eCVSHeader

 # Set `TopLevelAdmin' to `yes' to create a CVS directory at the top
 # level of the new working directory when using the `cvs checkout'
 # command.
 #TopLevelAdmin=no

 # Put CVS lock files in this directory rather than directly in the repository.
 #LockDir=/var/lock/cvs

 # Set `LogHistory' to `all' or `TOEFWUPCGMAR' to log all transactions to the
 # history file, or a subset as needed (ie `TMAR' logs all write operations)
 #LogHistory=TOEFWUPCGMAR

 # Set `RereadLogAfterVerify' to `always' (the default) to allow the verifymsg
 # script to change the log message.  Set it to `stat' to force CVS to verify
 # that the file has changed before reading it (this can take up to an extra
 # second per directory being committed, so it is not recommended for large
 # repositories.  Set it to `never' (the previous CVS behavior) to prevent
 # verifymsg scripts from changing the log message.
 #RereadLogAfterVerify=always

 # Set `UserAdminOptions' to the list of `cvs admin' commands (options)
 # that users not in the `cvsadmin' group are allowed to run.  This
 # defaults to `k', or only allowing the changing of the default
 # keyword expansion mode for files for users not in the `cvsadmin' group.
 # This value is ignored if the `cvsadmin' group does not exist.
 #
 # The following string would enable all `cvs admin' commands for all
 # users:
 #UserAdminOptions=aAbceIklLmnNostuU

 # Set `UseNewInfoFmtStrings' to `no' if you must support a legacy system by
 # enabling the deprecated old style info file command line format strings.
 # Be warned that these strings could be disabled in any new version of CVS.
 UseNewInfoFmtStrings=yes

 # Set `ImportNewFilesToVendorBranchOnly' to `yes' if you wish to force
 # every `cvs import' command to behave as if the `-X' flag was
 # specified.
 #ImportNewFilesToVendorBranchOnly=no

 # Set `PrimaryServer' to the CVSROOT to the primary, or write, server when
 # establishing one or more read-only mirrors which serve as proxies for
 # the write server in write mode or redirect the client to the primary for
 # write requests.
 #
 # For example:
 #
 #   PrimaryServer=:fork:localhost/cvsroot

 # Set `MaxProxyBufferSize' to the the maximum allowable secondary
 # buffer memory cache size before the buffer begins being stored to disk, in
 # bytes.  Must be a positive integer but may end in `k', `M', `G', or `T' (for
 # kiilo, mega, giga, & tera, respectively).  If an otherwise valid number you
 # specify is greater than the SIZE_MAX defined by your system's C compiler,
 # then it will be resolved to SIZE_MAX without a warning.  Defaults to 8M (8
 # megabytes).
 #
 # High values for MaxProxyBufferSize may speed up a secondary server
 # with old hardware and a lot of available memory but can actually slow a
 # modern system down slightly.
 #
 # For example:
 #
 #   MaxProxyBufferSize=1G

 # Set `MaxCommentLeaderLength' to the maximum length permitted for the
 # automagically determined comment leader used when expanding the Log
 # keyword, in bytes.  CVS's behavior when the automagically determined
 # comment leader exceeds this length is dependant on the value of
 # `UseArchiveCommentLeader' set in this file.  `unlimited' is a valid
 # setting for this value.  Defaults to 20 bytes.
 #
 # For example:
 #
 #   MaxCommentLeaderLength=20

 # Set `UseArchiveCommentLeader' to `yes' to cause CVS to fall back on
 # the comment leader set in the RCS archive file, if any, when the
 # automagically determined comment leader exceeds `MaxCommentLeaderLength'
 # bytes.  If `UseArchiveCommentLeader' is not set and a comment leader
 # greater than `MaxCommentLeaderLength' is calculated, the Log keyword
 # being examined will not be expanded.  Defaults to `no'.
 #
 # For example:
 #
 #   UseArchiveCommentLeader=no
--- a/src/tests/antunit/taskdefs/cvs/repository/CVSROOT/.#cvswrappers
+++ b/src/tests/antunit/taskdefs/cvs/repository/CVSROOT/.#cvswrappers
@@ -1,19 +0,0 @@
 # This file affects handling of files based on their names.
 #
 # The -m option specifies whether CVS attempts to merge files.
 #
 # The -k option specifies keyword expansion (e.g. -kb for binary).
 #
 # Format of wrapper file ($CVSROOT/CVSROOT/cvswrappers or .cvswrappers)
 #
 #  wildcard	[option value][option value]...
 #
 #  where option is one of
 #  -f		from cvs filter		value: path to filter
 #  -t		to cvs filter		value: path to filter
 #  -m		update methodology	value: MERGE or COPY
 #  -k		expansion mode		value: b, o, kkv, &c
 #
 #  and value is a single-quote delimited value.
 # For example:
 #*.gif -k 'b'
--- a/src/tests/antunit/taskdefs/cvs/repository/CVSROOT/.#loginfo
+++ b/src/tests/antunit/taskdefs/cvs/repository/CVSROOT/.#loginfo
@@ -1,36 +0,0 @@
 # The "loginfo" file controls where "cvs commit" log information is
 # sent. The first entry on a line is a regular expression which must
 # match the directory that the change is being made to, relative to the
 # $CVSROOT.  If a match is found, then the remainder of the line is a
 # filter program that should expect log information on its standard input.
 #
 # If the repository name does not match any of the regular expressions in this
 # file, the "DEFAULT" line is used, if it is specified.
 #
 # If the name ALL appears as a regular expression it is always used
 # in addition to the first matching regex or DEFAULT.
 #
 # If any format strings are present in the filter, they will be replaced
 # as follows:
 #    %c = canonical name of the command being executed
 #    %R = the name of the referrer, if any, otherwise the value NONE
 #    %p = path relative to repository
 #    %r = repository (path portion of $CVSROOT)
 #    %{sVv} = attribute list = file name, old version number (pre-checkin),
 #           new version number (post-checkin).  When either old or new revision
 #           is unknown, doesn't exist, or isn't applicable, the string "NONE"
 #           will be placed on the command line instead.
 #
 # Note that %{sVv} is a list operator and not all elements are necessary.
 # Thus %{sv} is a legal format string, but will only be replaced with
 # file name and new revision.
 # It also generates multiple arguments for each file being operated upon.
 # That is, if two files, file1 & file2, are being commited from 1.1 to
 # version 1.1.2.1 and from 1.1.2.2 to 1.1.2.3, respectively, %{sVv} will
 # generate the following six arguments in this order:
 # file1, 1.1, 1.1.2.1, file2, 1.1.2.2, 1.1.2.3.
 #
 # For example:
 #DEFAULT (echo ""; id; echo %s; date; cat) >> $CVSROOT/CVSROOT/commitlog
 # or
 #DEFAULT (echo ""; id; echo %{sVv}; date; cat) >> $CVSROOT/CVSROOT/commitlog
--- a/src/tests/antunit/taskdefs/cvs/repository/CVSROOT/.#modules
+++ b/src/tests/antunit/taskdefs/cvs/repository/CVSROOT/.#modules
@@ -1,26 +0,0 @@
 # Three different line formats are valid:
 #	key	-a    aliases...
 #	key [options] directory
 #	key [options] directory files...
 #
 # Where "options" are composed of:
 #	-i prog		Run "prog" on "cvs commit" from top-level of module.
 #	-o prog		Run "prog" on "cvs checkout" of module.
 #	-e prog		Run "prog" on "cvs export" of module.
 #	-t prog		Run "prog" on "cvs rtag" of module.
 #	-u prog		Run "prog" on "cvs update" of module.
 #	-d dir		Place module in directory "dir" instead of module name.
 #	-l		Top-level directory only -- do not recurse.
 #
 # NOTE:  If you change any of the "Run" options above, you'll have to
 # release and re-checkout any working directories of these modules.
 #
 # And "directory" is a path to a directory relative to $CVSROOT.
 #
 # The "-a" option specifies an alias.  An alias is interpreted as if
 # everything on the right of the "-a" had been typed on the command line.
 #
 # You can encode a module within a module by using the special '&'
 # character to interpose another module into the current module.  This
 # can be useful for creating a module that consists of many directories
 # spread out over the entire source repository.
--- a/src/tests/antunit/taskdefs/cvs/repository/CVSROOT/.#notify
+++ b/src/tests/antunit/taskdefs/cvs/repository/CVSROOT/.#notify
@@ -1,19 +0,0 @@
 # The "notify" file controls where notifications from watches set by
 # "cvs watch add" or "cvs edit" are sent.  The first entry on a line is
 # a regular expression which is tested against the directory that the
 # change is being made to, relative to the $CVSROOT.  If it matches,
 # then the remainder of the line is a filter program that should contain
 # one occurrence of %s for the user to notify, and information on its
 # standard input.
 #
 # "ALL" or "DEFAULT" can be used in place of the regular expression.
 #
 # format strings are replaceed as follows:
 #    %c = canonical name of the command being executed
 #    %R = the name of the referrer, if any, otherwise the value NONE
 #    %p = path relative to repository
 #    %r = repository (path portion of $CVSROOT)
 #    %s = user to notify
 #
 # For example:
 #ALL (echo Committed to %r/%p; cat) |mail %s -s "CVS notification"
--- a/src/tests/antunit/taskdefs/cvs/repository/CVSROOT/.#postadmin
+++ b/src/tests/antunit/taskdefs/cvs/repository/CVSROOT/.#postadmin
@@ -1,20 +0,0 @@
 # The "postadmin" file is called after the "admin" command finishes
 # processing a directory.
 #
 # If any format strings are present in the filter, they will be replaced
 # as follows:
 #    %c = canonical name of the command being executed
 #    %R = the name of the referrer, if any, otherwise the value NONE
 #    %p = path relative to repository
 #    %r = repository (path portion of $CVSROOT)
 #
 # The first entry on a line is a regular expression which is tested
 # against the directory that the change is being committed to, relative
 # to the $CVSROOT.  For the first match that is found, then the remainder
 # of the line is the name of the filter to run.
 #
 # If the repository name does not match any of the regular expressions in this
 # file, the "DEFAULT" line is used, if it is specified.
 #
 # If the name "ALL" appears as a regular expression it is always used
 # in addition to the first matching regex or "DEFAULT".
--- a/src/tests/antunit/taskdefs/cvs/repository/CVSROOT/.#postproxy
+++ b/src/tests/antunit/taskdefs/cvs/repository/CVSROOT/.#postproxy
@@ -1,22 +0,0 @@
 # The "postproxy" file is called from a secondary server as soon as
 # the secondary server closes its connection to the primary server.
 # This script might, for example, be used to shut down a dial up
 # or VPN connection to the primary server's network.
 #
 # If any format strings are present in the filter, they will be replaced
 # as follows:
 #    %c = canonical name of the command being executed
 #    %R = the name of the referrer, if any, otherwise the value NONE
 #    %p = path relative to repository (currently always ".")
 #    %r = repository (path portion of $CVSROOT)
 #
 # The first entry on a line is a regular expression which is tested
 # against the directory that the change is being committed to, relative
 # to the $CVSROOT.  For the first match that is found, then the remainder
 # of the line is the name of the filter to run.
 #
 # If the repository name does not match any of the regular expressions in this
 # file, the "DEFAULT" line is used, if it is specified.
 #
 # If the name "ALL" appears as a regular expression it is always used
 # in addition to the first matching regex or "DEFAULT".
--- a/src/tests/antunit/taskdefs/cvs/repository/CVSROOT/.#posttag
+++ b/src/tests/antunit/taskdefs/cvs/repository/CVSROOT/.#posttag
@@ -1,37 +0,0 @@
 # The "posttag" file is called after the "tag" command finishes
 # processing a directory.
 #
 # If any format strings are present in the filter, they will be replaced
 # as follows:
 #    %b = branch mode = "?" (delete ops - unknown) | "T" (branch)
 #                     | "N" (not branch)
 #    %o = operation = "add" | "mov" | "del"
 #    %c = canonical name of the command being executed
 #    %R = the name of the referrer, if any, otherwise the value NONE
 #    %p = path relative to repository
 #    %r = repository (path portion of $CVSROOT)
 #    %t = tagname
 #    %{sVv} = attribute list = file name, old version tag will be deleted
 #             from, new version tag will be added to (or deleted from, but
 #             this feature is deprecated.  When either old or new revision is
 #             unknown, doesn't exist, or isn't applicable, the string "NONE"
 #             will be placed on the command line.
 #
 # Note that %{sVv} is a list operator and not all elements are necessary.
 # Thus %{sV} is a legal format string, but will only be replaced with file
 # name and old revision. it also generates multiple arguments for each file
 # being operated upon.  i.e. if two files, file1 & file2, are having a tag
 # moved from version 1.1 to version 1.1.2.9, %{sVv} will generate the
 # following six arguments in this order:
 # file1, 1.1, 1.1.2.9, file2, 1.1, 1.1.2.9.
 #
 # The first entry on a line is a regular expression which is tested
 # against the directory that the change is being committed to, relative
 # to the $CVSROOT.  For the first match that is found, then the remainder
 # of the line is the name of the filter to run.
 #
 # If the repository name does not match any of the regular expressions in this
 # file, the "DEFAULT" line is used, if it is specified.
 #
 # If the name "ALL" appears as a regular expression it is always used
 # in addition to the first matching regex or "DEFAULT".
--- a/src/tests/antunit/taskdefs/cvs/repository/CVSROOT/.#postwatch
+++ b/src/tests/antunit/taskdefs/cvs/repository/CVSROOT/.#postwatch
@@ -1,20 +0,0 @@
 # The "postwatch" file is called after any command finishes writing new
 # file attibute (watch/edit) information in a directory.
 #
 # If any format strings are present in the filter, they will be replaced
 # as follows:
 #    %c = canonical name of the command being executed
 #    %R = the name of the referrer, if any, otherwise the value NONE
 #    %p = path relative to repository
 #    %r = repository (path portion of $CVSROOT)
 #
 # The first entry on a line is a regular expression which is tested
 # against the directory that the change is being committed to, relative
 # to the $CVSROOT.  For the first match that is found, then the remainder
 # of the line is the name of the filter to run.
 #
 # If the repository name does not match any of the regular expressions in this
 # file, the "DEFAULT" line is used, if it is specified.
 #
 # If the name "ALL" appears as a regular expression it is always used
 # in addition to the first matching regex or "DEFAULT".
--- a/src/tests/antunit/taskdefs/cvs/repository/CVSROOT/.#preproxy
+++ b/src/tests/antunit/taskdefs/cvs/repository/CVSROOT/.#preproxy
@@ -1,24 +0,0 @@
 # The "preproxy" file is called form the secondary server as soon as
 # the secondary server determines that it will be proxying a write
 # command to a primary server and immediately before it opens a
 # connection to the primary server.  This script might, for example, be
 # used to launch a dial up or VPN connection to the primary server's
 # network.
 #
 # If any format strings are present in the filter, they will be replaced
 # as follows:
 #    %c = canonical name of the command being executed
 #    %R = the name of the referrer, if any, otherwise the value NONE
 #    %p = path relative to repository (currently always ".")
 #    %r = repository (path portion of $CVSROOT)
 #
 # The first entry on a line is a regular expression which is tested
 # against the directory that the change is being committed to, relative
 # to the $CVSROOT.  For the first match that is found, then the remainder
 # of the line is the name of the filter to run.
 #
 # If the repository name does not match any of the regular expressions in this
 # file, the "DEFAULT" line is used, if it is specified.
 #
 # If the name "ALL" appears as a regular expression it is always used
 # in addition to the first matching regex or "DEFAULT".
--- a/src/tests/antunit/taskdefs/cvs/repository/CVSROOT/.#rcsinfo
+++ b/src/tests/antunit/taskdefs/cvs/repository/CVSROOT/.#rcsinfo
@@ -1,13 +0,0 @@
 # The "rcsinfo" file is used to control templates with which the editor
 # is invoked on commit and import.
 #
 # The first entry on a line is a regular expression which is tested
 # against the directory that the change is being made to, relative to the
 # $CVSROOT.  For the first match that is found, then the remainder of the
 # line is the name of the file that contains the template.
 #
 # If the repository name does not match any of the regular expressions in this
 # file, the "DEFAULT" line is used, if it is specified.
 #
 # If the name "ALL" appears as a regular expression it is always used
 # in addition to the first matching regex or "DEFAULT".
--- a/src/tests/antunit/taskdefs/cvs/repository/CVSROOT/.#taginfo
+++ b/src/tests/antunit/taskdefs/cvs/repository/CVSROOT/.#taginfo
@@ -1,46 +0,0 @@
 # The "taginfo" file is used to control pre-tag checks.
 # The filter on the right is invoked with the following arguments
 # if no format strings are present:
 #
 # $1 -- tagname
 # $2 -- operation "add" for tag, "mov" for tag -F, and "del" for tag -d
 # $3 -- tagtype "?" on delete, "T" for branch, "N" for static
 # $4 -- repository
 # $5->  file revision [file revision ...]
 #
 # If any format strings are present in the filter, they will be replaced
 # as follows:
 #    %b = branch mode = "?" (delete ops - unknown) | "T" (branch)
 #                     | "N" (not branch)
 #    %o = operation = "add" | "mov" | "del"
 #    %c = canonical name of the command being executed
 #    %R = the name of the referrer, if any, otherwise the value NONE
 #    %p = path relative to repository
 #    %r = repository (path portion of $CVSROOT)
 #    %t = tagname
 #    %{sVv} = attribute list = file name, old version tag will be deleted
 #             from, new version tag will be added to (or deleted from, but
 #             this feature is deprecated.  When either old or new revision is
 #             unknown, doesn't exist, or isn't applicable, the string "NONE"
 #             will be placed on the command line.
 #
 # Note that %{sVv} is a list operator and not all elements are necessary.
 # Thus %{sV} is a legal format string, but will only be replaced with file
 # name and old revision. it also generates multiple arguments for each file
 # being operated upon.  i.e. if two files, file1 & file2, are having a tag
 # moved from version 1.1 to version 1.1.2.9, %{sVv} will generate the
 # following six arguments in this order:
 # file1, 1.1, 1.1.2.9, file2, 1.1, 1.1.2.9.
 #
 # A non-zero exit of the filter program will cause the tag to be aborted.
 #
 # The first entry on a line is a regular expression which is tested
 # against the directory that the change is being committed to, relative
 # to the $CVSROOT.  For the first match that is found, then the remainder
 # of the line is the name of the filter to run.
 #
 # If the repository name does not match any of the regular expressions in this
 # file, the "DEFAULT" line is used, if it is specified.
 #
 # If the name "ALL" appears as a regular expression it is always used
 # in addition to the first matching regex or "DEFAULT".
--- a/src/tests/antunit/taskdefs/cvs/repository/CVSROOT/.#verifymsg
+++ b/src/tests/antunit/taskdefs/cvs/repository/CVSROOT/.#verifymsg
@@ -1,31 +0,0 @@
 # The "verifymsg" file is used to allow verification of logging
 # information.  It works best when a template (as specified in the
 # rcsinfo file) is provided for the logging procedure.  Given a
 # template with locations for, a bug-id number, a list of people who
 # reviewed the code before it can be checked in, and an external
 # process to catalog the differences that were code reviewed, the
 # following test can be applied to the code:
 #
 #   Making sure that the entered bug-id number is correct.
 #   Validating that the code that was reviewed is indeed the code being
 #       checked in (using the bug-id number or a seperate review
 #       number to identify this particular code set.).
 #
 # If any of the above test failed, then the commit would be aborted.
 #
 # Format strings present in the filter will be replaced as follows:
 #    %c = canonical name of the command being executed
 #    %R = the name of the referrer, if any, otherwise the value NONE
 #    %p = path relative to repository
 #    %r = repository (path portion of $CVSROOT)
 #    %l = name of log file to be verified.
 #
 # If no format strings are present in the filter, a default " %l" will
 # be appended to the filter, but this usage is deprecated.
 #
 # Actions such as mailing a copy of the report to each reviewer are
 # better handled by an entry in the loginfo file.
 #
 # One thing that should be noted is the the ALL keyword is not
 # supported.  There can be only one entry that matches a given
 # repository.