# Ant EJB Tasks User Manual

by

- Paul Austin (p_d_austin@yahoo.com)
- Tim Fennell (tfenne@rcn.com)
- Martin Gee (martin.gee@icsynergy.com)
- Conor MacNeill (conor@cortexebusiness.com.au)
- Greg Nelson (greg@netscape.com)

Version @VERSION@
$Id$

## Table of Contents

- Introduction
- EJB Tasks

## Introduction

Ant provides a number of optional tasks for developing Enterprise Java Beans (EJBs) . In general these tasks are specific to the particular vendor's EJB Server.

At present the tasks support:

- Borland Application Server 4.5
- iPlanet Application Server 6.0
- jboss 2.1 and above EJB servers
- Weblogic 4.5.1, 5.1, and 6.0 EJB servers

Over time we expect further optional tasks to support additional EJB Servers.

Ant provides a number of optional tasks for developing Enterprise Java Beans (EJBs). In general these tasks are specific to the particular vendor's EJB Server. At present the tasks support Weblogic 4.5.1 and 5.1 EJB servers. Over time we expect further optional tasks to support additional EJB Servers.

## EJB Tasks

Task | Application Servers
blgenclient | Borland Application Server 4.5
ddcreator | Weblogic 4.5.1
ejbc | Weblogic 4.5.1
iplanet-ejbc | iPlanet Application Server 6.0
ejbjar | Nested Elements
borland | Borland Application Server 4.5
jBoss | jBoss
iPlanet | iPlanet Application Server 6.0
weblogic | Weblogic 5.1 & 6.0
wlrun | Weblogic 4.5.1, 5.1 & 6.0
wlstop | Weblogic 4.5.1, 5.1 & 6.0

## ddcreator

### Description:

ddcreator will compile a set of Weblogic text-based deployment descriptors into a serialized EJB deployment descriptor. The selection of which of the text-based descriptors are to be compiled is based on the standard Ant include and exclude selection mechanisms.

### Parameters:

Attribute | Description | Required
descriptors | This is the base directory from which descriptors are selected. | Yes
dest | The directory where the serialised deployment descriptors will be written | Yes
classpath | This is the classpath to use to run the underlying weblogic ddcreator tool. This must include the `weblogic.ejb.utils.DDCreator` class | No

### Examples

    <ddcreator descriptors="${dd.dir}"
               dest="${gen.classes}"
               classpath="${descriptorbuild.classpath}">
      <include name="*.txt" />
    </ddcreator>

## ejbc

### Description:

The ejbc task will run Weblogic's ejbc tool. This tool will take a serialised deployment descriptor, examine the various EJB interfaces and bean classes and then generate the required support classes necessary to deploy the bean in a Weblogic EJB container. This will include the RMI stubs and skeletons as well as the classes which implement the bean's home and remote interfaces.

The ant task which runs this tool is able to compile several beans in a single operation. The beans to be compiled are selected by including their serialised deployment descriptors. The standard ant `include` and `exclude` constructs can be used to select the deployment descriptors to be included.

Each descriptor is examined to determine whether the generated classes are out of date and need to be regenerated. The deployment descriptor is de-serialized to discover the home, remote and implementation classes. The corresponding source files are determined and checked to see their modification times. These times and the modification time of the serialised descriptor itself are compared with the modification time of the generated classes. If the generated classes are not present or are out of date, the ejbc tool is run to generate new versions.

### Parameters:

Attribute | Description | Required
descriptors | This is the base directory from which the serialised deployment descriptors are selected. | Yes
dest | The base directory where the generated classes, RIM stubs and RMI skeletons are written | Yes
manifest | The name of a manifest file to be written. This manifest will contain an entry for each EJB processed | Yes
src | The base directory of the source tree containing the source files of the home interface, remote interface and bean implementation classes. | Yes
classpath | This classpath must include both the `weblogic.ejbc` class and the classfiles of the bean, home interface, remote interface, etc of the bean being processed. | No

### Examples

    <ejbc descriptors="${gen.classes}"
               src="${src.dir}"
               dest="${gen.classes}"
               manifest="${build.manifest}"
               classpath="${descriptorbuild.classpath}">
      <include name="*.ser" />
    </ejbc>

## iplanet-ejbc

### Description:

Task to compile EJB stubs and skeletons for the iPlanet Application Server 6.0. Given a standard EJB 1.1 XML descriptor as well as an iAS-specific EJB descriptor, this task will generate the stubs and skeletons required to deploy the EJB to iAS. Since the XML descriptors can include multiple EJBs, this is a convenient way of specifying many EJBs in a single Ant task.

For each EJB specified, the task will locate the three classes that comprise the EJB in the destination directory. If these class files cannot be located in the destination directory, the task will fail. The task will also attempt to locate the EJB stubs and skeletons in this directory. If found, the timestamps on the stubs and skeletons will be checked to ensure they are up to date. Only if these files cannot be found or if they are out of date will the iAS ejbc utility be called to generate new stubs and skeletons.

### Parameters:

Attribute | Description | Required
ejbdescriptor | Standard EJB 1.1 XML descriptor (typically titled "ejb-jar.xml"). | Yes
iasdescriptor | iAS-specific EJB XML descriptor (typically titled "ias-ejb-jar.xml"). | Yes
dest | The is the base directory where the RMI stubs and skeletons are written. In addition, the class files for each bean (home interface, remote interface, and EJB implementation) must be found in this directory. | Yes
classpath | The classpath used when generating EJB stubs and skeletons. If omitted, the classpath specified when Ant was started will be used. Nested "classpath" elements may also be used. | No
keepgenerated | Indicates whether or not the Java source files which are generated by ejbc will be saved or automatically deleted. If "yes", the source files will be retained. If omitted, it defaults to "no". | No
debug | Indicates whether or not the ejbc utility should log additional debugging statements to the standard output. If "yes", the additional debugging statements will be generated. If omitted, it defaults to "no". | No
iashome | May be used to specify the "home" directory for this iAS installation. This is used to find the ejbc utility if it isn't included in the user's system path. If specified, it should refer to the "[install-location]/iplanet/ias6/ias" directory. If omitted, the ejbc utility must be on the user's system path. | No

### Examples

    <iplanet-ejbc ejbdescriptor="ejb-jar.xml"
                  iasdescriptor="ias-ejb-jar.xml"
                  dest="${build.classesdir}"
                  classpath="${ias.ejbc.cpath}" />

    <iplanet-ejbc ejbdescriptor="ejb-jar.xml"
                  iasdescriptor="ias-ejb-jar.xml"
                  dest="${build.classesdir}"
                  keepgenerated="yes"
                  debug="yes"
                  iashome="${ias.home}" >
                  <classpath>
                      <pathelement path="." />
                      <pathelement path="${build.classpath}" />
                  </classpath>
    </iplanet-ejbc>

## wlrun

### Description:

The `wlrun` task is used to start a weblogic server. The task runs a weblogic instance in a separate Java Virtual Machine. A number of parameters are used to control the operation of the weblogic instance. Note that the task, and hence ant, will not complete until the weblogic instance is stopped.

### Parameters:

Attribute | Description | Required for 4.5.1 and 5.1 | Required for 6.0
BEA Home | The location of the BEA Home qwhere the server's config is defined. If this attribute is present, wlrun assumes that the server will be running under Weblogic 6.0 | N/A | Yes
home | The location of the weblogic home that is to be used. This is the location where weblogic is installed. | Yes | Yes. Note this is the absolute location, not relative to BEA home.
Domain | The domain to which the server belongs. | N/A | Yes
classpath | The classpath to be used with the Java Virtual Machine that runs the Weblogic Server. Prior to Weblogic 6.0, this is typically set to the Weblogic boot classpath. Under Weblogic 6.0 this should include all the weblogic jars | Yes | Yes
wlclasspath | The weblogic classpath used by the Weblogic Server. | No | N/A
properties | The name of the server's properties file within the weblogic home directory used to control the weblogic instance. | Yes | N/A
name | The name of the weblogic server within the weblogic home which is to be run. This defaults to "myserver" | No | No
policy | The name of the security policy file within the weblogic home directory that is to be used. If not specified, the default policy file `weblogic.policy` is used. | No | No
username | The management username used to manage the server | N/A | No
password | The server's management password | N/A | Yes
pkPassword | The private key password so the server can decrypt the SSL private key file | N/A | No
jvmargs | Additional argument string passed to the Java Virtual Machine used to run the Weblogic instance. | No | No
args | Additional argument string passed to the Weblogic instance. | No | No

### Nested Elements

The wlrun task supports nested <classpath> and <wlclasspath> elements to set the repsective classpaths.

### Examples

This example shows the use of wlrun to run a server under Weblogic 5.1

        <wlrun taskname="myserver"
               classpath="${weblogic.boot.classpath}"
               wlclasspath="${weblogic.classes}:${code.jars}"
               name="myserver"
               home="${weblogic.home}"
               properties="myserver/myserver.properties"/>

This example shows wlrun being used to run the petstore server under Weblogic 6.0

        <wlrun taskname="petstore"
               classpath="${weblogic.classes}"
               name="petstoreServer"
               domain="petstore"
               home="${weblogic.home}"
               password="petstorePassword"
               beahome="${bea.home}"/>

## wlstop

### Description:

The `wlstop` task is used to stop a weblogic instance which is currently running. To shut down an instance you must supply both a username and a password. These will be stored in the clear in the build script used to stop the instance. For security reasons, this task is therefore only appropriate in a development environment.

This task works for most version of Weblogic, including 6.0. You need to specify the BEA Home to have this task work correctly under 6.0

### Parameters:

Attribute | Description | Required
BEAHome | This attribute selects Weblogic 6.0 shutdown. | No
classpath | The classpath to be used with the Java Virtual Machine that runs the Weblogic Shutdown comment. | Yes
user | The username of the account which will be used to shutdown the server | Yes
password | The password for the account specified in the user parameter. | Yes
url | The URL which describes the port to which the server is listening for T3 connections. For example, t3://localhost:7001 | Yes
delay | The delay in seconds after which the server will stop. This defaults to an immediate shutdown. | No

### Nested Element

The classpath of the welstop task can be set by a <classpath> nested element.

### Examples

This example show the shutdown for a Weblogic 6.0 server

        <wlstop classpath="${weblogic.classes}"
                user="system"
                url="t3://localhost:7001"
                password="foobar"
                beahome="${bea.home}"/>

## ejbjar

### Description:

This task is designed to support building of EJB1.1 jar files. Support is currently provided for 'vanilla' EJB1.1 jar files - i.e. those containing only the user generated class files and the standard deployment descriptor. Nested elements provide support for vendor specific deployment tools. These currently include:

- Borland Application Server 4.5
- iPlanet Application Server 6.0
- Jboss 2.1 and above
- Weblogic 5.1/6.0 session/entity beans using the weblogic.ejbc tool
- TOPLink for WebLogic 2.5.1-enabled entity beans

The task works as a directory scanning task, and performs an action for each deployment descriptor found. As such the includes and excludes should be set to ensure that all desired EJB1.1 descriptors are found, but no application server descriptors are found. For each descriptor found, ejbjar will parse the deployment descriptor to determine the necessary class files which implement the bean. These files are assembled along with the deployment descriptors into a well formed EJB jar file. Any support files which need to be included in the generated jar can be added with the <support> nested element. For each class included in the jar, ejbjar will scan for any super classes or super interfaces. These will be added to the generated jar.

If no nested vendor-specific deployment elements are present, the task will simply generate a generic EJB jar. Such jars are typically used as the input to vendor-specific deployment tools. For each nested deployment element, a vendor specific deployment tool is run to generate a jar file ready for deployment in that vendor's EJB container.

The jar files are only built if they are out of date. Each deployment tool element will examine its target jar file and determine if it is out of date with respect to the class files and deployment descriptors that make up the bean. If any of these files are newer than the jar file the jar will be rebuilt otherwise a message is logged that the jar file is up to date.

### Naming Convention

Ejbjar handles the processing of multiple beans, and it uses a set of naming conventions to determine the name of the generated EJB jars. The naming convention that is used is controlled by the "naming" attribute. It supports the following values

- descriptor

This is the default naming scheme. The name of the generated bean is derived from the name of the deployment descriptor. For an Account bean, for example, the deployment descriptor would be named `Account-ejb-jar.xml`. Vendor specific descriptors are located using the same naming convention. The weblogic bean, for example, would be named `Account-weblogic-ejb-jar.xml`. Under this arrangment, the deployment descriptors can be separated from the code implementing the beans, which can be useful whe the same bean code is deployed in separate beans.

This scheme is useful when you are using one bean per EJB jar and where you may be deploying the same bean classes in different beans, with different deployment characteristics.

- ejb-name

This naming scheme uses the <ejb-name> element from the deployment descriptor to determine the bean name. In this situation, the descriptors normally use the generic descriptor names, such as `ejb-jar.xml` along with any associated vendor specific descriptor names. For example, If the value of the <ejb-name> were to be given in the deployment descriptor as follows:

    <ejb-jar>
        <enterprise-beans>
            <entity>
                <ejb-name>Sample</ejb-name>
                <home>org.apache.ant.ejbsample.SampleHome</home>

then the name of the generated bean would be `Sample.jar`

This scheme is useful where you want to use the standard deployment descriptor names, which may be more compatible with other EJB tools. This scheme must have one bean per jar.

- directory

In this mode, the name of the generated bean jar is derived from the directory containing the deployment descriptors. Again the deployment descriptors typically use the standard filenames. For example, if the path to the deployment descriptor is `/home/user/dev/appserver/dd/sample`, then the generated bean will be named `sample.jar`

This scheme is also useful when you want to use standard style descriptor names. It is often most useful when the descriptors are located in the same directory as the bean source code, although that is not mandatory. This scheme can handle multiple beans per jar.

- basejarname

The final scheme supported by the <ejbjar> task is used when you want to specify the generated bean jar name directly. In this case the name of the generated jar is specified by the "basejarname" attribute. Since all generated beans will have the same name, this task should be only used when each descriptor is in its own directory.

This scheme is most appropriate when you are using multiple beans per jar and only process a single deployment descriptor. You typically want to specify the name of the jar and not derive it from the beans in the jar.

### Parameters:

Attribute | Description | Required
descriptordir | The base directory under which to scan for EJB deployment descriptors. If this attribute is not specified, then the deployment descriptors must be located in the directory specified by the 'srcdir' attribute. | No
srcdir | The base directory containing the .class files that make up the bean. Note that this can be the same as the descriptordir if all files are in the same directory tree. | Yes
destdir | The base directory into which generated jar files are deposited. Jar files are deposited in directories corresponding to their location within the descriptordir namespace. Note that this attribute is only used if the task is generating generic jars (i.e. no vendor-specific deployment elements have been specified). | Yes
naming | Controls the naming convention used to name generated EJB jars. Please refer to the description above. | No
basejarname | The base name that is used for the generated jar files. If this attribute is specified, the generic jar file name will use this value as the prefix (followed by the value specified in the 'genericjarsuffix' attribute) and the resultant ejb jar file (followed by any suffix specified in the nested element). | No
basenameterminator | String value used to substring out a string from the name of each deployment descriptor found, which is then used to locate related deployment descriptors (e.g. the WebLogic descriptors). For example, a basename of '.' and a deployment descriptor called 'FooBean.ejb-jar.xml' would result in a basename of 'FooBean' which would then be used to find FooBean.weblogic-ejb-jar.xml and FooBean.weblogic-cmp-rdbms-jar.xml, as well as to create the filenames of the jar files as FooBean-generic.jar and FooBean-wl.jar. This attribute is not used if the 'basejarname' attribute is specified. | No, defaults to '-'.
genericjarsuffix | String value appended to the basename of the deployment descriptor to create the filename of the generic EJB jar file. | No, defaults to '-generic.jar'.
classpath | This classpath is used when resolving classes which are to be added to the jar. Typically nested deployment tool elements will also support a classpath which will be combined with this classpath when resolving classes | No.
flatdestdir | Set this attribute to true if you want all generated jars to be placed in the root of the destdir, rather than according to the location of the deployment descriptor within the descriptor dir hierarchy. | No.

### Nested Elements

In addition to the vendor specific nested elements, the ejbjar task provides three nested elements.

#### Classpath

The <classpath> nested element allows the classpath to be set. It is useful when setting the classpath from a reference path. In all other respects the behaviour is the same as the classpath attribute.

#### dtd

The <dtd> element is used to specify the local location of DTDs to be used when parsing the EJB deployment descriptor. Using a local DTD is much faster than loading the DTD across the net. If you are running ejbjar behind a firewall you may not even be able to access the remote DTD. The supported vendor-specific nested elements know the location of the required DTDs within the vendor class hierarchy and, in general, this means <dtd> elements are not required. It does mean, however, that the vendor's class hierarchy must be available in the classpath when Ant is started. If your want to run Ant without requiring the vendor classes in the classpath, you would need to use a <dtd> element.

Attribute | Description | Required
publicId | The public Id of the DTD for which the location is being provided | Yes
location | The location of the local copy of the DTD. This can either be a file or a resource loadable from the classpath. | Yes

#### support

The <support> nested element is used to supply additional classes (files) to be included in the generated jars. The <support> element is a FileSet, so it can either reference a fileset declared elsewhere or it can be defined in-place with the appropriate <include> and <exclude> nested elements. The files in the support fileset are added into the generated EJB jar in the same relative location as their location within the support fileset. Note that when ejbjar generates more than one jar file, the support files are added to each one.

### Vendor-specific deployment elements

Each vendor-specific nested element controls the generation of a deployable jar specific to that vendor's EJB container. The parameters for each supported deployment element are detailed here.

### Jboss element

The jboss element searches for the jboss specific deployment descriptors and adds them to the final ejb jar file. Jboss has two deployment descriptors jboss.xml and jaws.xml (for container manager persistance only). The Jboss server uses hot deployment and does not require compilation of additional stubs and skeletons.

Attribute | Description | Required
destdir | The base directory into which the generated weblogic ready jar files are deposited. Jar files are deposited in directories corresponding to their location within the descriptordir namespace. | Yes
genericjarsuffix | A generic jar is generated as an intermediate step in build the weblogic deployment jar. The suffix used to generate the generic jar file is not particularly important unless it is desired to keep the generic jar file. It should not, however, be the same as the suffix setting. | No, defaults to '-generic.jar'.
suffix | String value appended to the basename of the deployment descriptor to create the filename of the WebLogic EJB jar file. | No, defaults to '.jar'.
keepgeneric | This controls whether the generic file used as input to ejbc is retained. | No, defaults to false

### Weblogic element

The weblogic element is used to control the weblogic.ejbc compiler for generating weblogic EJB jars. Prior to Ant 1.3, the method of locating CMP descriptors was to use the ejbjar naming convention. So if your ejb-jar was called, Customer-ejb-jar.xml, your weblogic descriptor was called Customer- weblogic-ejb-jar.xml and your CMP descriptor had to be Customer-weblogic-cmp- rdbms-jar.xml. In addition, the <type-storage> element in the weblogic descriptor had to be set to the standard name META-INF/weblogic-cmp-rdbms- jar.xml, as that is where the CMP descriptor was mapped to in the generated jar.

There are a few problems with this scheme. It does not allow for more than one CMP descriptor to be defined in a jar and it is not compatible with the deployment descriptors generated by some tools.

In Ant 1.3, ejbjar parses the weblogic deployment descriptor to discover the CMP descriptors, which are then included automatically. This behaviour is controlled by the newCMP attribute. Note that if you move to the new method of determining CMP descriptors, you will need to update your weblogic deployment descriptor's <type-storage> element. In the above example, you would define this as META-INF/Customer-weblogic-cmp-rdbms-jar.xml.

Attribute | Description | Required
destdir | The base directory into which the generated weblogic ready jar files are deposited. Jar files are deposited in directories corresponding to their location within the descriptordir namespace. | Yes
genericjarsuffix | A generic jar is generated as an intermediate step in build the weblogic deployment jar. The suffix used to generate the generic jar file is not particularly important unless it is desired to keep the generic jar file. It should not, however, be the same as the suffix setting. | No, defaults to '-generic.jar'.
suffix | String value appended to the basename of the deployment descriptor to create the filename of the WebLogic EJB jar file. | No, defaults to '.jar'.
classpath | The classpath to be used when running the weblogic ejbc tool. Note that this tool typically requires the classes that make up the bean to be available on the classpath. Currently, however, this will cause the ejbc tool to be run in a separate VM | No
wlclasspath | Weblogic 6.0 will give a warning if the home and remote interfaces of a bean are on the system classpath used to run weblogic.ejbc. In that case, the standard weblogic classes should be set with this attribute (or equivalent nested element) and the home and remote interfaces located with the standard classpath attribute | No
keepgeneric | This controls whether the generic file used as input to ejbc is retained. | No, defaults to false
compiler | This allows for the selection of a different compiler to be used for the compilation of the generated Java files. This could be set, for example, to Jikes to compile with the Jikes compiler. If this is not set and the `build.compiler` property is set to jikes, the Jikes compiler will be used. If this is not desired, the value "`default`" may be given to use the default compiler | No
rebuild | This flag controls whether weblogic.ejbc is always invoked to build the jar file. In certain circumstances, such as when only a bean class has been changed, the jar can be generated by merely replacing the changed classes and not rerunning ejbc. Setting this to false will reduce the time to run ejbjar. | No, defaults to true.
keepgenerated | Controls whether weblogic will keep the generated Java files used to build the class files added to the jar. This can be useful when debugging | No, defaults to false.
args | Any additional arguments to be passed to the weblogic.ejbc tool. | No.
weblogicdtd | Deprecated. Defines the location of the ejb-jar DTD in the weblogic class hierarchy. This should not be necessary if you have weblogic in your classpath. If you do not, you should use a nested <dtd> element, described above. If you do choose to use an attribute, you should use the ejbdtd attribute in preference to this one, anyway. | No.
wldtd | Deprecated. Defines the location of the weblogic-ejb-jar DTD which covers the Weblogic specific deployment descriptors. This should not be necessary if you have weblogic in your classpath. If you do not, you should use a nested <dtd> element, described above. | No.
ejbdtd | Deprecated. Defines the location of the ejb-jar DTD in the weblogic class hierarchy. This should not be necessary if you have weblogic in your classpath. If you do not, you should use a nested <dtd> element, described above. | No.
newCMP | If this is set to true, the new method for locating CMP descriptors will be used. | No. Defaults to false
oldCMP | Deprecated This is an antonym for newCMP which should be used instead. | No.
noEJBC | If this attribute is set to true, Weblogic's ejbc will not be run on the EJB jar. Use this if you prefer to run ejbc at deployment time. | No.

The weblogic nested element itself supports two nested elements <classpath> and <wlclasspath> which are used to set the respective classpaths. These nested elements are useful when setting up class paths using reference Ids.

### TOPLink for Weblogic element

The TopLink element is used to handle beans which use Toplink for the CMP operations. It is derived from the standard weblogic element so it supports the same set of attributes please these additional attributes

Attribute | Description | Required
toplinkdescriptor | This specifies the name of the TOPLink deployment descriptor file contained in the 'descriptordir' directory. | Yes
toplinkdtd | This specifies the location of the TOPLink DTD file. This can be a file path or a file URL. This attribute is not required, but using a local DTD is recommended. | No, defaults to dtd file at www.objectpeople.com.

### Examples

This example shows ejbjar being used to generate deployment jars using a Weblogic EJB container. This example requires the naming standard to be used for the deployment descriptors. Using this format will create a ejb jar file for each variation of '*-ejb-jar.xml' that is found in the deployment descriptor directory.

        <ejbjar srcdir="${build.classes}"
                descriptordir="${descriptor.dir}">
          <weblogic destdir="${deploymentjars.dir}"
                    classpath="${descriptorbuild.classpath}"/>
          <include name="**/*-ejb-jar.xml"/>
          <exclude name="**/*weblogic*.xml"/>
        </ejbjar>

If weblogic is not in the Ant classpath, the following example shows how to specify the location of the weblogic DTDs. This example also show the use of a nested classpath element.

        <ejbjar descriptordir="${src.dir}" srcdir="${build.classes}">
           <weblogic destdir="${deployment.webshop.dir}"
                     keepgeneric="true"
                     args="-g -keepgenerated ${ejbc.compiler}"
                     suffix=".jar"
                     oldCMP="false">
             <classpath>
               <pathelement path="${descriptorbuild.classpath}"/>
             </classpath>
           </weblogic>
           <include name="**/*-ejb-jar.xml"/>
           <exclude name="**/*-weblogic-ejb-jar.xml"/>
           <dtd publicId="-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 1.1//EN"
                location="${weblogic.home}/classes/weblogic/ejb/deployment/xml/ejb-jar.dtd"/>
           <dtd publicId="-//BEA Systems, Inc.//DTD WebLogic 5.1.0 EJB//EN"
                location="${weblogic.home}/classes/weblogic/ejb/deployment/xml/weblogic-ejb-jar.dtd"/>
        </ejbjar>

This example shows ejbjar being used to generate a single deployment jar using a Weblogic EJB container. This example does not require the deployment descriptors to use the naming standard. This will create only one ejb jar file - 'TheEJBJar.jar'.

        <ejbjar srcdir="${build.classes}"
                descriptordir="${descriptor.dir}"
                basejarname="TheEJBJar">
          <weblogic destdir="${deploymentjars.dir}"
                    classpath="${descriptorbuild.classpath}"/>
          <include name="**/ejb-jar.xml"/>
          <exclude name="**/weblogic*.xml"/>
        </ejbjar>

This example shows ejbjar being used to generate deployment jars for a TOPLink-enabled entity bean using a Weblogic EJB container. This example does not require the deployment descriptors to use the naming standard. This will create only one TOPLink-enabled ejb jar file - 'Address.jar'.

        <ejbjar srcdir="${build.dir}"
                destdir="${solant.ejb.dir}"
                descriptordir="${descriptor.dir}"
                basejarname="Address">
                <weblogictoplink destdir="${solant.ejb.dir}"
                        classpath="${java.class.path}"
                        keepgeneric="false"
                        toplinkdescriptor="Address.xml"
                        toplinkdtd="file:///dtdfiles/toplink-cmp_2_5_1.dtd"
                        suffix=".jar"/>
                <include name="**/ejb-jar.xml"/>
                <exclude name="**/weblogic-ejb-jar.xml"/>
        </ejbjar>

This final example shows how you would set-up ejbjar under Weblogic 6.0. It also shows the use of the <support> element to add support files

        <ejbjar descriptordir="${dd.dir}" srcdir="${build.classes.server}">
           <include name="**/*-ejb-jar.xml"/>
           <exclude name="**/*-weblogic-ejb-jar.xml"/>
           <support dir="${build.classes.server}">
                <include name="**/*.class"/>
           </support>
           <weblogic destdir="${deployment.dir}"
                     keepgeneric="true"
                     suffix=".jar"
                     rebuild="false">
             <classpath>
                <pathelement path="${build.classes.server}"/>
             </classpath>
             <wlclasspath>
                <pathelement path="${weblogic.classes}"/>
             </wlclasspath>
           </weblogic>
        </ejbjar>

### iPlanet Application Server (iAS) element

The <iplanet> nested element is used to build iAS-specific stubs and skeletons and construct a JAR file which may be deployed to the iPlanet Application Server 6.0. The build process will always determine if the EJB stubs/skeletons and the EJB-JAR file are up to date, and it will do the minimum amount of work required.

Like the WebLogic element, a naming convention for the EJB descriptors is most commonly used to specify the name for the completed JAR file. For example, if the EJB descriptor ejb/Account-ejb-jar.xml is found in the descriptor directory, the iplanet element will search for an iAS-specific EJB descriptor file named ejb/Account-ias-ejb-jar.xml (if it isn't found, the task will fail) and a JAR file named ejb/Account.jar will be written in the destination directory. Note that when the EJB descriptors are added to the JAR file, they are automatically renamed META-INF/ejb-jar.xml and META-INF/ias-ejb-jar.xml.

Of course, this naming behavior can be modified by specifying attributes in the ejbjar task (for example, basejarname, basenameterminator, and flatdestdir) as well as the iplanet element (for example, suffix). Refer to the appropriate documentation for more details.

### Parameters:

Attribute | Description | Required
destdir | The base directory into which the generated JAR files will be written. Each JAR file is written in directories which correspond to their location within the "descriptordir" namespace. | Yes
classpath | The classpath used when generating EJB stubs and skeletons. If omitted, the classpath specified in the "ejbjar" parent task will be used. If specified, the classpath elements will be prepended to the classpath specified in the parent "ejbjar" task. Note that nested "classpath" elements may also be used. | No
keepgenerated | Indicates whether or not the Java source files which are generated by ejbc will be saved or automatically deleted. If "yes", the source files will be retained. If omitted, it defaults to "no". | No
debug | Indicates whether or not the ejbc utility should log additional debugging statements to the standard output. If "yes", the additional debugging statements will be generated. If omitted, it defaults to "no". | No
iashome | May be used to specify the "home" directory for this iAS installation. This is used to find the ejbc utility if it isn't included in the user's system path. If specified, it should refer to the [install-location]/iplanet/ias6/ias directory. If omitted, the ejbc utility must be on the user's system path. | No
suffix | String value appended to the JAR filename when creating each JAR. If omitted, it defaults to ".jar". | No

As noted above, the iplanet element supports additional <classpath> nested elements.

### Examples

This example demonstrates the typical use of the <iplanet> nested element. It will name each EJB-JAR using the "basename" prepended to each standard EJB descriptor. For example, if the descriptor named "Account-ejb-jar.xml" is processed, the EJB-JAR will be named "Account.jar"

        <ejbjar srcdir="${build.classesdir}"
                descriptordir="${src}" >
                <iplanet destdir="${assemble.ejbjar}"
                         classpath="${ias.ejbc.cpath}" />
                <include name="**/*-ejb-jar.xml"/>
                <exclude name="**/*ias-*.xml"/>
        </ejbjar>

This example demonstrates the use of a nested classpath element as well as some of the other optional attributes.

        <ejbjar srcdir="${build.classesdir}"
                descriptordir="${src}" >
                <iplanet destdir="${assemble.ejbjar}"
                         iashome="${ias.home}"
                         debug="yes"
                         keepgenerated="yes" >
                         <classpath>
                             <pathelement path="." />
                             <pathelement path="${build.classpath}" />
                         </classpath>
                </iplanet>
                <include name="**/*-ejb-jar.xml"/>
                <exclude name="**/*ias-*.xml"/>
        </ejbjar>

This example demonstrates the use of basejarname attribute. In this case, the completed EJB-JAR will be named "HelloWorld.jar" If multiple EJB descriptors might be found, care must be taken to ensure that the completed JAR files don't overwrite each other.

        <ejbjar srcdir="${build.classesdir}"
                descriptordir="${src}"
                basejarname="HelloWorld" >
                <iplanet destdir="${assemble.ejbjar}"
                         classpath="${ias.ejbc.cpath}"/>
                <include name="**/*-ejb-jar.xml"/>
                <exclude name="**/*ias-*.xml"/>
        </ejbjar>

This example demonstrates the use of the dtd nested element. If the local copies of the DTDs are included in the classpath, they will be automatically referenced without the nested elements. In iAS 6.0 SP2, these local DTDs are found in the [iAS-install-directory]/APPS directory. In iAS 6.0 SP3, these local DTDs are found in the [iAS-install-directory]/dtd directory.

        <ejbjar srcdir="${build.classesdir}"
                descriptordir="${src}">
                <iplanet destdir="${assemble.ejbjar}">
                         classpath="${ias.ejbc.cpath}" />
                <include name="**/*-ejb-jar.xml"/>
                <exclude name="**/*ias-*.xml"/>
                <dtd publicId="-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 1.1//EN"
                     location="${ias.home}/APPS/ejb-jar_1_1.dtd"/>
                <dtd publicId="-//Sun Microsystems, Inc.//DTD iAS Enterprise JavaBeans 1.0//EN"
                     location="${ias.home}/APPS/IASEjb_jar_1_0.dtd"/>
        </ejbjar>