 rebase? (#1)
* With the Intel compiler on Linux, prefer ifort for the final link step
icc has known problems with mixed-language builds that ifort can handle just fine. Fixes #1956
* Rename operands to put lda on the input/output constraint list
* Fix wrong constraints in inline assembly
for #2009
* Fix inline assembly constraints
rework indices to allow marking argument lda4 as input and output. For #2009
* Fix inline assembly constraints
rework indices to allow marking argument lda as input and output.
* Fix inline assembly constraints
* Fix inline assembly constraints
* Fix inline assembly constraints in Bulldozer TRSM kernels
rework indices to allow marking i,as and bs as both input and output (marked operand n1 as well for simplicity). For #2009
* Correct range_n limiting
same bug as seen in #1388, somehow missed in corresponding PR #1389
* Allow multithreading TRMV again
revert workaround introduced for issue #1332 as the actual cause appears to be my incorrect fix from #1262 (see #1388)
* Fix error introduced during cleanup
* Reduce list of kernels in the dynamic arch build
to make compilation complete reliably within the 1h limit again
* init
* move fix to right place
* Fix missing -c option in AVX512 test
* Fix AVX512 test always returning false due to missing compiler option
* Make x86_32 imply NO_AVX2, NO_AVX512 in addition to NO_AVX
fixes #2033
* Keep xcode8.3 for osx BINARY=32 build
as xcode10 deprecated i386
* Make sure that AVX512 is disabled in 32bit builds
for #2033
* Improve handling of NO_STATIC and NO_SHARED
to avoid surprises from defining either as zero. Fixes #2035 by addressing some concerns from #1422
* init
* address warning introed with #1814 et al
* Restore locking optimizations for OpenMP case
restore another accidentally dropped part of #1468 that was missed in #2004 to address performance regression reported in #1461
* HiSilicon tsv110 CPUs optimization branch
add HiSilicon tsv110 CPUs optimization branch
* add TARGET support for HiSilicon tsv110 CPUs
* add TARGET support for HiSilicon tsv110 CPUs
* add TARGET support for HiSilicon tsv110 CPUs
* Fix module definition conflicts between LAPACK and ReLAPACK
for #2043
* Do not compile in AVX512 check if AVX support is disabled
xgetbv is function depends on NO_AVX being undefined - we could change that too, but that combo is unlikely to work anyway
* ctest.c : add __POWERPC__ for PowerMac
* Fix crash in sgemm SSE/nano kernel on x86_64
Fix bug #2047.
Signed-off-by: Celelibi <celelibi@gmail.com>
* param.h : enable defines for PPC970 on DarwinOS
fixes:
gemm.c: In function 'sgemm_':
../common_param.h:981:18: error: 'SGEMM_DEFAULT_P' undeclared (first use in this function)
#define SGEMM_P SGEMM_DEFAULT_P
^
* common_power.h: force DCBT_ARG 0 on PPC970 Darwin
without this, we see
../kernel/power/gemv_n.S:427:Parameter syntax error
and many more similar entries
that relates to this assembly command
dcbt 8, r24, r18
this change makes the DCBT_ARG = 0
and openblas builds through to completion on PowerMac 970
Tests pass
* Make TARGET=GENERIC compatible with DYNAMIC_ARCH=1
for issue #2048
* make DYNAMIC_ARCH=1 package work on TSV110.
* make DYNAMIC_ARCH=1 package work on TSV110
* Add Intel Denverton
for #2048
* Add Intel Denverton
* Change 64-bit detection as explained in #2056
* Trivial typo fix
as suggested in #2022
* Disable the AVX512 DGEMM kernel (again)
Due to as yet unresolved errors seen in #1955 and #2029
* Use POSIX getenv on Cygwin
The Windows-native GetEnvironmentVariable cannot be relied on, as
Cygwin does not always copy environment variables set through Cygwin
to the Windows environment block, particularly after fork().
* Fix for #2063: The DllMain used in Cygwin did not run the thread memory
pool cleanup upon THREAD_DETACH which is needed when compiled with
USE_TLS=1.
* Also call CloseHandle on each thread, as well as on the event so as to not leak thread handles.
* AIX asm syntax changes needed for shared object creation
* power9 makefile. dgemm based on power8 kernel with following changes : 32x unrolled 16x4 kernel and 8x4 kernel using (lxv stxv butterfly rank1 update). improvement from 17 to 22-23gflops. dtrmm cases were added into dgemm itself
* Expose CBLAS interfaces for I?MIN and I?MAX
* Build CBLAS interfaces for I?MIN and I?MAX
* Add declarations for ?sum and cblas_?sum
* Add interface for ?sum (derived from ?asum)
* Add ?sum
* Add implementations of ssum/dsum and csum/zsum
as trivial copies of asum/zsasum with the fabs calls replaced by fmov to preserve code structure
* Add ARM implementations of ?sum
(trivial copies of the respective ?asum with the fabs calls removed)
* Add ARM64 implementations of ?sum
as trivial copies of the respective ?asum kernels with the fabs calls removed
* Add ia64 implementation of ?sum
as trivial copy of asum with the fabs calls removed
* Add MIPS implementation of ?sum
as trivial copy of ?asum with the fabs calls removed
* Add MIPS64 implementation of ?sum
as trivial copy of ?asum with the fabs replaced by mov to preserve code structure
* Add POWER implementation of ?sum
as trivial copy of ?asum with the fabs replaced by fmr to preserve code structure
* Add SPARC implementation of ?sum
as trivial copy of ?asum with the fabs replaced by fmov to preserve code structure
* Add x86 implementation of ?sum
as trivial copy of ?asum with the fabs calls removed
* Add x86_64 implementation of ?sum
as trivial copy of ?asum with the fabs calls removed
* Add ZARCH implementation of ?sum
as trivial copies of the respective ?asum kernels with the ABS and vflpsb calls removed
* Detect 32bit environment on 64bit ARM hardware
for #2056, using same approach as #2058
* Add cmake defaults for ?sum kernels
* Add ?sum
* Add ?sum definitions for generic kernel
* Add declarations for ?sum
* Add -lm and disable EXPRECISION support on *BSD
fixes #2075
* Add in runtime CPU detection for POWER.
* snprintf define consolidated to common.h
* Support INTERFACE64=1
* Add support for INTERFACE64 and fix XERBLA calls
1. Replaced all instances of "int" with "blasint"
2. Added string length as "hidden" third parameter in calls to fortran XERBLA
* Correct length of name string in xerbla call
* Avoid out-of-bounds accesses in LAPACK EIG tests
see https://github.com/Reference-LAPACK/lapack/issues/333
* Correct INFO=4 condition
* Disable reallocation of work array in xSYTRF
as it appears to cause memory management problems (seen in the LAPACK tests)
* Disable repeated recursion on Ab_BR in ReLAPACK xGBTRF
due to crashes in LAPACK tests
* sgemm/strmm
* Update Changelog with changes from 0.3.6
* Increment version to 0.3.7.dev
* Increment version to 0.3.7.dev
* Misc. typo fixes
Found via `codespell -q 3 -w -L ith,als,dum,nd,amin,nto,wis,ba -S ./relapack,./kernel,./lapack-netlib`
* Correct argument of CPU_ISSET for glibc <2.5
fixes #2104
* conflict resolve
* Revert reference/ fixes
* Revert Changelog.txt typos
* Disable the SkyLakeX DGEMMITCOPY kernel as well
as a stopgap measure for https://github.com/numpy/numpy/issues/13401 as mentioned in #1955
* Disable DGEMMINCOPY as well for now
#1955
* init
* Fix errors in cpu enumeration with glibc 2.6
for #2114
* Change two http links to https
Closes #2109
* remove redundant code #2113
* Set up CI with Azure Pipelines
[skip ci]
* TST: add native POWER8 to CI
* add native POWER8 testing to
Travis CI matrix with ppc64le
os entry
* Update link to IBM MASS library, update cpu support status
* first try migrating one of the arm builds from travis
* fix tabbing in azure commands
* Update azure-pipelines.yml
take out offending lines (although stolen from https://github.com/conda-forge/opencv-feedstock azure-pipelines fiie)
* Update azure-pipelines.yml
* Update azure-pipelines.yml
* Update azure-pipelines.yml
* Update azure-pipelines.yml
* DOC: Add Azure CI status badge
* Add ARMV6 build to azure CI setup (#2122)
using aytekinar's Alpine image and docker script from the Travis setup
[skip ci]
* TST: Azure manylinux1 & clean-up
* remove some of the steps & comments
from the original Azure yml template
* modify the trigger section to use
develop since OpenBLAS primarily uses
this branch; use the same batching
behavior as downstream projects NumPy/
SciPy
* remove Travis emulated ARMv6 gcc build
because this now happens in Azure
* use documented Ubuntu vmImage name for Azure
and add in a manylinux1 test run to the matrix
[skip appveyor]
* Add NO_AFFINITY to available options on Linux, and set it to ON
to match the gmake default. Fixes second part of #2114
* Replace ISMIN and ISAMIN kernels on all x86_64 platforms (#2125)
* Mark iamax_sse.S as unsuitable for MIN due to issue #2116
* Use iamax.S rather than iamax_sse.S for ISMIN/ISAMIN on all x86_64 as workaround for #2116
* Move ARMv8 gcc build from Travis to Azure
* Move ARMv8 gcc build from Travis to Azure
* Update .travis.yml
* Test drone CI
* install make
* remove sudo
* Install gcc
* Install perl
* Install gfortran and add a clang job
* gfortran->gcc-gfortran
* Switch to ubuntu and parallel jobs
* apt update
* Fix typo
* update yes
* no need of gcc in clang build
* Add a cmake build as well
* Add cmake builds and print options
* build without lapack on cmake
* parallel build
* See if ubuntu 19.04 fixes the ICE
* Remove qemu armv8 builds
* arm32 build
* Fix typo
* TST: add SkylakeX AVX512 CI test
* adapt the C-level reproducer code for some
recent SkylakeX AVX512 kernel issues, provided
by Isuru Fernando and modified by Martin Kroeker,
for usage in the utest suite
* add an Intel SDE SkylakeX emulation utest run to
the Azure CI matrix; a custom Docker build was required
because Ubuntu image provided by Azure does not support
AVX512VL instructions
* Add option USE_LOCKING for single-threaded build with locking support
for calling from concurrent threads
* Add option USE_LOCKING for single-threaded build with locking support
* Add option USE_LOCKING for SMP-like locking in USE_THREAD=0 builds
* Add option USE_LOCKING but keep default settings intact
* Remove unrelated change
* Do not try ancient PGI hacks with recent versions of that compiler
should fix #2139
* Build and run utests in any case, they do their own checks for fortran availability
* Add softfp support in min/max kernels
fix for #1912
* Revert "Add softfp support in min/max kernels"
* Separate implementations of AMAX and IAMAX on arm
As noted in #1912 and comment on #1942, the combined implementation happens to "do the right thing" on hardfp, but cannot return both value and index on softfp where they would have to share the return register
* Ensure correct output for DAMAX with softfp
* Use generic kernels for complex (I)AMAX to support softfp
* improved zgemm power9 based on power8
* upload thread safety test folder
* hook up c++ thread safety test (main Makefile)
* add c++ thread test option to Makefile.rule
* Document NO_AVX512
for #2151
* sgemm pipeline improved, zgemm rewritten without inner packs, ABI lxvx v20 fixed with vs52
* Fix detection of AVX512 capable compilers in getarch
21eda8b5 introduced a check in getarch.c to test if the compiler is capable of
AVX512. This check currently fails, since the used __AVX2__ macro is only
defined if getarch itself was compiled with AVX2/AVX512 support. Make sure this
is the case by building getarch with -march=native on x86_64. It is only
supposed to run on the build host anyway.
* c_check: Unlink correct file
* power9 zgemm ztrmm optimized
* conflict resolve
* Add gfortran workaround for ABI violations in LAPACKE
for #2154 (see gcc bug 90329)
* Add gfortran workaround for ABI violations
for #2154 (see gcc bug 90329)
* Add gfortran workaround for potential ABI violation
for #2154
* Update fc.cmake
* Remove any inadvertent use of -march=native from DYNAMIC_ARCH builds
from #2143, -march=native precludes use of more specific options like -march=skylake-avx512 in individual kernels, and defeats the purpose of dynamic arch anyway.
* Avoid unintentional activation of TLS code via USE_TLS=0
fixes #2149
* Do not force gcc options on non-gcc compilers
fixes compile failure with pgi 18.10 as reported on OpenBLAS-users
* Update Makefile.x86_64
* Zero ecx with a mov instruction
PGI assembler does not like the initialization in the constraints.
* Fix mov syntax
* new sgemm 8x16
* Update dtrmm_kernel_16x4_power8.S
* PGI compiler does not like -march=native
* Fix build on FreeBSD/powerpc64.
Signed-off-by: Piotr Kubaj <pkubaj@anongoth.pl>
* Fix build for PPC970 on FreeBSD pt. 1
FreeBSD needs DCBT_ARG=0 as well.
* Fix build for PPC970 on FreeBSD pt.2
FreeBSD needs those macros too.
* cgemm/ctrmm power9
* Utest needs CBLAS but not necessarily FORTRAN
* Add mingw builds to Appveyor config
* Add getarch flags to disable AVX on x86
(and other small fixes to match Makefile behaviour)
* Make disabling DYNAMIC_ARCH on unsupported systems work
needs to be unset in the cache for the change to have any effect
* Mingw32 needs leading underscore on object names
(also copy BUNDERSCORE settings for FORTRAN from the corresponding Makefile)
7 years ago |
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155 |
- //LSB (Linux Standard Base) compiler
- //only support lsbc++
- #if defined (__LSB_VERSION__)
- #if !defined (__cplusplus)
- COMPILER_LSB
- #else
- #error "OpenBLAS only supports lsbcc."
- #endif
- #endif
-
- #if defined(__clang__)
- COMPILER_CLANG
- #endif
-
- #if defined(__PGI) || defined(__PGIC__)
- COMPILER_PGI
- #endif
-
- #if defined(__PATHSCALE__) || defined(__PATHCC__)
- COMPILER_PATHSCALE
- #endif
-
- #if defined(__INTEL_COMPILER) || defined(__ICC) || defined(__ECC)
- COMPILER_INTEL
- #endif
-
- #if defined(__OPENCC__)
- COMPILER_OPEN64
- #endif
-
- #if defined(__SUNPRO_C)
- COMPILER_SUN
- #endif
-
- #if defined(__IBMC__) || defined(__xlc__)
- COMPILER_IBM
- #endif
-
- #if defined(__DECCC__)
- COMPILER_DEC
- #endif
-
- #if defined(__GNUC__)
- COMPILER_GNU
- #endif
-
- #if defined(__ANDROID__)
- OS_ANDROID
- #endif
-
- #if defined(__linux__)
- OS_LINUX
- #endif
-
- #if defined(__FreeBSD__) || defined(__FreeBSD_kernel__)
- OS_FREEBSD
- #endif
-
- #if defined(__NetBSD__)
- OS_NETBSD
- #endif
-
- #if defined(__OpenBSD__)
- OS_OPENBSD
- #endif
-
- #if defined(__DragonFly__)
- OS_DRAGONFLY
- #endif
-
- #if defined(__sun)
- OS_SUNOS
- #endif
-
- #if defined(__APPLE__)
- OS_DARWIN
- #endif
-
- #if defined(_AIX)
- OS_AIX
- #endif
-
- #if defined(__OSF)
- OS_OSF
- #endif
-
- #if defined(__WIN32) || defined(__WIN64) || defined(__WINNT)
- OS_WINNT
- #endif
-
- #if defined(__CYGWIN__)
- OS_CYGWIN_NT
- #endif
-
- #if defined(__INTERIX)
- OS_INTERIX
- #endif
-
- #if defined(__gnu_hurd__)
- /* Hurd is very similar to GNU/Linux, it should work out of the box */
- OS_LINUX
- #endif
-
- #if defined(__HAIKU__)
- OS_HAIKU
- #endif
-
- #if defined(__i386) || defined(_X86)
- ARCH_X86
- #endif
-
- #if defined(__x86_64__) || defined(__amd64__)
- ARCH_X86_64
- #endif
-
- #if defined(__powerpc___) || defined(__PPC__) || defined(_POWER) || defined(__POWERPC__)
- ARCH_POWER
- #endif
-
- #if defined(__s390x__) || defined(__zarch__)
- ARCH_ZARCH
- #endif
-
- #ifdef __mips64
- ARCH_MIPS64
- #endif
-
- #if defined(__mips32) || defined(__mips)
- ARCH_MIPS
- #endif
-
- #ifdef __alpha
- ARCH_ALPHA
- #endif
-
- #if defined(__sparc) || defined(__sparc__)
- ARCH_SPARC
- #endif
-
- #if defined(__ia64__) || defined(__ia64)
- ARCH_IA64
- #endif
-
- #if defined(__LP64) || defined(__LP64__) || defined(__ptr64) || defined(__x86_64__) || defined(__amd64__) || defined(__64BIT__)
- BINARY_64
- #endif
-
- #if defined(__ARM_ARCH) || defined(__ARM_ARCH_7A__) || defined(__arm__)
- ARCH_ARM
- #endif
-
- #if defined(__aarch64__)
- ARCH_ARM64
- #endif
-
|
